Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Lock Installation & Rekey Across Brunswick
Lock installation and rekeying in Brunswick typically runs $35-$85 per cylinder for rekey work and $95-$220 per lock for new installation, depending on hardware grade. Most jobs in Brunswick are completed same-day, and we quote the full price in writing before a technician ever rolls the van. Call (331) 310-8471 and a live person answers, not a voicemail queue. Daniel Novak built Novak Lock & Security on one rule: the price on the phone is the price on the invoice, with no call-out surcharge added at the door.
Brunswick’s housing stock has a specific fingerprint. Thousands of ranches, raised ranches, and two-story colonials went up during the 1970s through 1990s subdivision boom along Pearl Road and Grafton Road, and a striking number still carry the original builder-grade Kwikset knob-and-deadbolt sets. Many were never rekeyed after the last ownership change. That matters more than most homeowners realize, because the builder’s key may still be out there.
Why Novak Lock & Security Is Brunswick’s Preferred Lock Installation & Rekey Company
We’ve been doing Lock Installation & Rekey work long enough to know what Brunswick doors do when Medina County winter hits. Freeze-thaw cycles in the Lake Erie snow belt don’t just chill the hinges. They shift door frames, misalign deadbolt strikes, and seize graphite-starved lock cylinders. The calls we get after the first hard freeze each November follow a pattern, and we stock for it.
Our technicians are background-checked and uniformed on every visit. When we finish a job in Brunswick, you get a written scope, a documented photo record of the work, and the exact warranty terms in writing. That’s not a perk we sell as an upgrade. It’s standard procedure under The Haven Standard, the same quality and documentation framework applied across all ten Haven brands.
We answer the phone 24/7. No answering service acting like a locksmith, no “we’ll get back to you within 24 hours.” A live person picks up, quotes a firm price, and dispatches a local crew. For Brunswick homeowners researching before they call, that’s the difference between a locksmith and a gamble.
Our Lock Installation & Rekey Services in Brunswick
Smart Lock Installation
Smart lock retrofits on Brunswick’s older door prep can get complicated fast. The builder-standard bore from a 1983 colonial off Grafton Road doesn’t always line up with the mounting plate on a modern smart deadbolt, and if the existing strike isn’t shimmed correctly, the bolt binds and the lock reports a jam every other cycle. We’ve installed enough of these in Brunswick to know which retrofit plates work with 1980s door prep and which ones need minor boring adjustments. We quote the full scope in writing before the first screw comes out.
Keyless Entry
Keyless entry systems pair well with Brunswick’s attached two-car garages. The garage entry door is the most-used exterior door in most of these homes, and it’s also the one most likely to have a worn-out Kwikset knob that locks behind people. A keypad deadbolt eliminates the locked-out-of-the-house-while-the-car’s-in-the-garage problem entirely. We install keyless entry across Brunswick subdivisions, and we calibrate the bolt throw so it doesn’t bind when the frame shifts in February.
Keypad Lock
For rental properties and multi-generational households in Brunswick, keypad locks solve a practical problem: you’re not cutting five copies of a key that a contractor might lose. Codes are programmable at the keypad, can be changed in seconds, and leave an audit trail. We stock keypad deadbolts that fit the standard 2-1/8-inch cross bore on Brunswick’s stock of ranches and raised ranches. No oversized trim plates, no cobbled installs.
Biometric Lock
Biometric locks are heavier gear than most Brunswick homeowners need on the front door, but they make sense on a home office, a gun room, or a basement door where you want access control without carrying a key. Fingerprint readers, like any electronic hardware, need a clean power source and a properly aligned strike to work reliably. We’ve seen cheap biometric installs fail within a season because the strike was never shimmed and the deadbolt dragged. Ours don’t.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Brunswick
We’re factory-authorized on Baldwin, Mul-T-Lock, and Abloy, and we carry rekey kits and replacement cylinders for all three on the van. That matters in Brunswick because a Mul-T-Lock or Abloy high-security cylinder can’t be rekeyed with a standard Kwikset pin kit. If a technician shows up without the right parts, you’re either waiting or paying for a second trip. We stock the common repin kits for 1970s-1990s Kwikset sets and strike shim sets for that era’s door prep, so the work gets finished in one trip.
Common Lock Installation & Rekey Problems We See in Brunswick Homes
- Builder’s key still works. The 1980s subdivision boom along Pearl and Grafton Roads put thousands of near-identical homes on the ground with the same few builder-spec Kwikset models. Many of those locks were never rekeyed after purchase, meaning keys from prior owners, contractors, or the original site supervisor could still open the door. That’s not a hypothetical. We’ve confirmed it in Brunswick repeatedly.
- Original Kwikset sets fail in freeze-thaw. Medina County’s winter cycle of hard freeze followed by thaw causes door frames to move and lock cylinders to seize. When the temperature drops, the cylinder pins bind. When the frame shifts, the deadbolt won’t throw. We get emergency frozen-lockout and stuck-deadbolt calls from Brunswick every November, and again after ice storms.
- Smart lock retrofits fight old door prep. A 1985 colonial’s door prep wasn’t engineered for a motorized deadbolt. If the bolt doesn’t seat cleanly into the strike, the smart lock thinks it’s jammed and drains the battery trying to correct. Shim sets fix most of these, but the stock shims that come in the box are rarely enough. We carry the right ones.
- Garage entry door lock failure. The attached garage is the default entrance for most Brunswick households, which means that door gets more cycles than any other lock on the property. Builder-grade knobs from that era wear out, and the latch fails. We replace or rekey those garage entry sets all year, but the failures cluster in cold months when the frame contracts.
Pricing for Lock Installation & Rekey in Brunswick, OH
Here’s what Brunswick homeowners should expect on the invoice, in writing, before we dispatch.
- Rekey a single cylinder: $35-$55
- Rekey the whole home (3-4 locks, keyed alike): $85-$140
- New deadbolt installation (entry-grade): $95-$150 per lock
- New deadbolt installation (ANSI Grade 1, bump-resistant): $150-$220 per lock
- Smart lock installation: $120-$220, depending on retrofit complexity and whether new boring is required
- High-security cylinder installation (Mul-T-Lock, Abloy): $180-$320 per cylinder
Key duplication runs $3-$12 per key depending on blank type and security level. The final price is the price on the phone. Haven Standard Clause 1: the price quoted on the phone is the price on the invoice. There is no call-out surcharge added on arrival, and no technician is permitted to change the price at the door. If a competitor has quoted you a written estimate, we’ll review it at no charge as a free second opinion.
We Also Serve Cities Near Brunswick
We serve Brunswick and the surrounding metro regularly, including Strongsville, North Royalton, North Olmsted, and North Ridgeville. If you’re in one of those cities, the same written-pricing rule applies. For more on our full coverage area and service details, see Lock Installation & Rekey in Brunswick.
Serving Brunswick, OH - Our Local Coverage Area
We’re based in the Brunswick area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Lock Installation & Rekey in Brunswick
If you never rekeyed after purchase and the locks are original Kwikset sets from the 1970s-1990s build era, assume the builder’s key is still out there. The test is simple: we can pull the plug and read the pinning, but here’s the practical version. If you don’t know how many copies of your key exist, neither does the lock. In a raised ranch off Grafton Road, we rekeyed a 1980s Kwikset deadbolt that had never been repinned since the original build. The builder’s key was still circulating from the previous owner, and the cylinder was graphite-starved from years of freeze-thaw cycles. Our tech pulled the pin and tumbler plug, repinned it to a new key, and installed a bump-resistant ANSI Grade 1 deadbolt, turning a security risk into a fresh start in under an hour. Rekeying kills every old key in one pass. Call (331) 310-8471 for a firm quote.
Brunswick sits in the Lake Erie snow belt, and Medina County’s freeze-thaw swings cause door frames to contract and shift, pulling the deadbolt out of alignment with the strike plate. The cylinder itself can also seize if the pins are dry and the lock hasn’t been lubricated in years. Most winter jams in Brunswick are strike alignment failures, not lock failures. We shim and reposition the strike, then repin or replace the cylinder if it’s binding. Call before you force the bolt, because a snapped tailpiece turns a $55 fix into a full lock replacement.
Usually, yes. The standard 2-1/8-inch cross bore on a 1980s colonial matches most smart deadbolt mounting plates, but the strike alignment is where retrofits go wrong. If the existing strike isn’t shimmed to match the smart lock’s bolt geometry, the lock jams and reports an error. We carry retrofit shim sets specific to Brunswick’s builder-era door prep, so most installs require no new boring. When boring is needed, it’s a minor adjustment and we quote it in writing before we start. Get a firm price by calling (331) 310-8471.
Rekeying changes the internal pins so old keys stop working and a new key operates the same lock. It costs $35-$55 per cylinder in Brunswick and takes about 15 minutes per lock. Replacing swaps the entire hardware set, which makes sense when the lock is worn, damaged, or you want to upgrade the security grade. A bump-resistant ANSI Grade 1 deadbolt runs $150-$220 installed. If your builder-grade Kwikset set is 35 years old and still on original pins, rekeying buys you a fresh start. If the latch is sloppy or the bolt binds, replacement makes more sense. Call (331) 310-8471 and we’ll tell you which one your door actually needs.
Yes, in most cases. The garage entry door is the highest-cycle lock on a Brunswick home, and the failure is usually the latch or the cylinder, not the entire knob-and-deadbolt assembly. We stock the latch and cylinder components that match the builder-spec Kwikset sets from the 1970s-1990s era, so we can often repair the existing set on the first trip. If the hardware is too worn to justify repair, we’ll show you the options at three price points and you decide. The price is written before any work starts. Call (331) 310-8471 for a quote now.
Written by Daniel Novak, Owner at Novak Lock & Security, serving Brunswick and surrounding communities since 2002.