Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Lock Installation & Rekey Across El Paso
Lock installation and rekeying in El Paso typically runs $85-$225 for standard deadbolts and $150-$395 for smart lock or keyless entry systems installed, with rekeying priced per cylinder between $18 and $35 for most residential hardware. We quote the full price on the phone before anyone is dispatched, and that number is the number on the invoice. If you live off McCombs Street, out toward the Lower Valley, or anywhere else in El Paso, call (331) 310-8471 and we’ll give you a written price before we roll.
Why Novak Lock & Security Is El Paso’s Preferred Lock Installation & Rekey Company
We’re El Paso locksmiths who understand what this city’s housing actually does to locks. Adobe homes in the Lower Valley settle. Thin steel doors on Eastside tract houses flex under 105-degree heat. Dust off the Franklins gets into everything, including pin tumbler cylinders. None of that surprises us, because we’ve been working on El Paso hardware long enough to see it all.
Every technician who shows up at your door is background-checked and in uniform. Every visit ends with a documented photo record of what we found and what we did. That’s how we’ve worked since 2002, under what we call the Haven Standard. Daniel Novak built this company on Clause 1: the price on the phone is the price on the invoice. No bait, no switch, no “that’ll be extra” once the lock’s already off the door.
When you call, a live person answers. Not a voicemail. Not a callback service. We dispatch from our El Paso office, and our techs know the difference between a house in Kern Place and a ranch off Loop 375 without asking you to repeat your cross streets twice.
Our Lock Installation & Rekey Services in El Paso
Our Lock Installation & Rekey team handles everything from a single deadbolt replacement to keying every outbuilding on your property alike. Here’s what we do most often in El Paso:
Smart Lock Installation
We install Schlage, Yale, and Baldwin smart locks on El Paso homes every week. The main thing to know here: thin steel doors and hollow-core slabs common in Eastside and Westside tract homes flex in summer heat, so we check frame alignment before mounting anything electronic. A smart lock bolted to a warped frame will chew through batteries and eventually refuse to throw the deadbolt. We fix the alignment first, then install.
Keyless Entry
Keyless entry systems put a keypad where the key used to be, and in El Paso the biggest enemy is dust. Factory lubricant inside keypad mechanisms dries out fast in single-digit humidity, and ultrafine silica from spring haboobs works its way under the buttons. We’re not going to stop the dust. But we can spec keypads with sealed contacts and set realistic service intervals so you’re not locked out in June.
Keypad Lock
Keypad locks make sense for El Paso households with contractors, cleaners, or extended family coming and going. If you’re in the Northeast near Fort Bliss and your house has gone through multiple PCS tenants, changing the code is the fastest way to control who still gets in. We’ll match a keypad lock to your current deadbolt prep and key it to the same key if that’s what you want.
Biometric Lock
Fingerprint locks are growing out here, mostly among El Paso homeowners who own rental properties or run small businesses near the ports of entry. Biometric hardware is precision equipment, and the Chihuahuan Desert is not gentle on precision. We carry factory-authorized Mul-T-Lock and Sargent biometric options and we’ll give you a written price before you decide anything. These jobs are scheduled, not rushed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in El Paso
We’re factory-authorized for Medeco, Mul-T-Lock, Abloy, Baldwin, and Schlage, and we carry a range of Yale and Sargent hardware for El Paso customers. If you bought a home with a patchwork of Kwikset, Schlage, and no-name cylinders, we can consolidate everything onto one key brand and one keyed-alike system. Parts for common El Paso hardware stay on our service vans, which means most single-family jobs finish in one visit. No waiting on a distributor in Dallas.
Common Lock Installation & Rekey Problems We See in El Paso Homes
- Haboob dust in pin tumbler cylinders. Ultrafine silica blows in off the Franklin Mountains and packs into the spaces between pins and springs. A gate lock that felt smooth in February can feel like it’s full of sand by May. Lubricating a packed cylinder without cleaning it out first just makes paste. We disassemble, clean, and only then re-lube or rekey.
- Adobe and stucco settling in the Lower Valley. Soil movement throws door frames out of square, which means the new deadbolt’s throw doesn’t line up with the strike plate. You can force it, but then the motor in a smart lock strains and dies. We realign the frame or adjust the strike plate before installing anything new, so the lock works the day we leave and the day after the next monsoon-free dry spell.
- Factory lubricant drying out in single-digit humidity. El Paso is one of the driest cities in Texas. Grease that would last five years in Houston lasts maybe eight months here. When we rekey or install, we use desert-appropriate lubricant, and we’ll tell you honestly how often your hardware should be serviced. For most El Paso homes, that’s once a year.
- Military turnover chains near Fort Bliss. A house that has cycled through six tenants in three years may have six different keys floating around the neighborhood. New PCS families often hold keys that passed through a chain of previous renters, property managers, and contractors. Rekeying every exterior cylinder on move-in is the only way to know who no longer has access.
Pricing for Lock Installation & Rekey in El Paso, TX
Here are the ranges you should expect for work in El Paso, and yes, these are real numbers we quote on the phone every day:
| Service | Typical El Paso Range |
|---|---|
| Rekey a standard deadbolt or knob (per cylinder) | $18-$35 |
| Rekey entire home (3 exterior doors, all cylinders) | $95-$180 |
| Install a standard deadbolt (labor only, hardware extra) | $85-$140 |
| Install a smart lock or keyless entry system | $150-$395 |
| Key a detached workshop, gate, and house alike (bulk rekey package) | $120-$260 |
| Key duplication (standard residential key) | $3-$8 per key |
What moves the price is cylinder count, hardware grade, and whether we’re also realigning a frame. What doesn’t move it: showing up. There is no call-out surcharge added on arrival. The dispatcher quotes a firm number before we send anyone. Haven Standard Clause 1. You’ll also get a written scope of work and a documented photo record when we leave. Call (331) 310-8471 for a free estimate on anything above.
We Also Serve Cities Near El Paso
Novak Lock & Security serves El Paso and the surrounding region. Our service area includes San Antonio, Schertz, Leander, and New Braunfels, and we bring the same written-price rule to every job in every one of those cities. If you’re inside El Paso city limits or just outside, you’re in our normal dispatch area. Call (331) 310-8471 and we’ll confirm coverage by cross street.
Serving El Paso, TX - Our Local Coverage Area
We’re based in the El Paso area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Lock Installation & Rekey in El Paso
Yes. Late spring through midsummer is what we call PCS season around Fort Bliss. Incoming military families take possession of homes where keys have passed through chains of previous tenants, property managers, and contractors, and the sensible thing is to rekey every exterior cylinder the week you move in. June and July are our busiest months for bulk rekeying in the Northeast and along the Fort Bliss corridor. Call (331) 310-8471 before your move-in date and we’ll schedule it.
Yes, and we do it regularly. We drove out to a ranch property off McCombs Street in the Northeast where the owner wanted a single master key for his house, a detached workshop, and three gate locks spread across half an acre. After rekeying two Kwikset deadbolts and a rusted pin-and-tumbler gate lock, we installed a Schlage smart lock on the main entrance and set up a restricted key system so every outbuilding shares one key. All in one visit, before the dust kicked up off the Franklins. Same kind of job for your property: one visit, everything keyed alike, written price before we start.
Because haboob dust is extremely fine silica, and it works its way between the bolt and the strike plate, packing into the cylinder and the motor housing. If the frame is even slightly out of square, the bolt drags on the strike plate and the accumulation makes it worse. We clean the cylinder, check frame alignment, and lubricate with a desert-appropriate product. If the motor is already damaged, we’ll tell you before touching anything else, and you’ll have a replacement price in writing before you decide. Call (331) 310-8471 for an assessment.
Yes. Rekeying replaces the pins inside each cylinder so the old keys no longer turn the lock. If the house changed tenants multiple times near Fort Bliss and you don’t know how many keys were copied, rekeying is the only way to guarantee prior tenants and their guests can’t get in. We can also key every exterior lock to a single new key and install higher-security cylinders if you want to prevent future key duplication. Call (331) 310-8471 after you close and we’ll schedule the rekey before your boxes are unpacked.
Not different locks, but different installation technique. Adobe walls shift with soil movement, especially in the Lower Valley and Segundo Barrio, which throws frames out of square. Stucco homes in newer developments tend to have standardized door preps but thin frames that warp in summer heat. We choose the same quality hardware for both, but on adobe we spend more time on alignment and strike plate adjustment. The lock itself is only as reliable as the frame it’s mounted to. For an on-site evaluation, call (331) 310-8471.
Written by Daniel Novak, Owner at Novak Lock & Security, serving El Paso residents since the company’s founding in 2002.