Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Lock Installation & Rekey Across Englewood
Lock installation and rekeying in Englewood typically runs $85 to $265 per cylinder depending on hardware grade, and most residential jobs are completed same-day. At Novak Lock & Security, the dispatcher quotes a firm price on the phone before anyone rolls a truck, and that number is the number on the invoice. We answer live 24/7, and our uniformed technicians run Englewood daily with the truck stocked for the older hardware this city throws at us. Call (331) 310-8471 for a written estimate before you commit to anything.
Why Novak Lock & Security Is Englewood’s Preferred Lock Installation & Rekey Company
Englewood is not a cookie-cutter suburb. The housing stock here runs from 1940s brick bungalows on Floyd Avenue to newer transit-oriented condos near the RTD light-rail line, and the locks reflect that spread. Our Lock Installation & Rekey team has worked Englewood long enough to know that a deadbolt on a Hampden Avenue ranch behaves differently than one in a CityCenter Englewood condo unit. We carry the tooling for both ends of that range, including the mortise cylinder pullers and skeleton-key conversion kits most locksmiths stopped stocking a decade ago.
Since 2002, Novak Lock & Security has logged over 60,000 locks, keys, and systems installed or serviced, every one with a written price before we started and a documented record when we left. Daniel Novak built the company around a single rule: the price on the phone is the price on the invoice. Haven Standard Clause 1. No bait-and-switch call-out pricing, no technician “updating” the quote at your doorstep. That rule holds in Englewood the same as everywhere else we operate.
Our Lock Installation & Rekey Services in Englewood
Smart Lock Installation
Many Englewood homeowners are putting smart locks on 70-year-old doors, and the fitment is not always straightforward. A 1952 bungalow on Girard Avenue has a thicker, slightly warped door slab and an original mortise assembly that a modern Yale or Schlage smart deadbolt was never designed to mate with. We handle that adaptation: strike adjustment, door prep, and proper alignment so the smart lock actually throws and retracts without fighting the frame. We install and configure Yale, Baldwin, Schlage, and other major smart platforms, and we show you the lock working before we leave.
Keyless Entry & Keypad Locks
Keypad entry makes sense for Englewood’s rental-heavy neighborhoods near South Broadway. When tenants turn over, you delete a code instead of rekeying a cylinder. But keypad locks on older doors suffer the same seasonal movement problem as mechanical deadbolts. Chinook winds can shift a door frame 1/8 inch in a single afternoon, and a keypad deadbolt that was perfectly aligned on a Tuesday will bind by Thursday if the strike wasn’t set with that movement in mind. We set strikes for Englewood’s actual climate, not a showroom door.
Biometric Lock Installation
Biometric locks work well in Englewood’s winter for one simple reason: Colorado’s low humidity means fingerprint readers don’t fog the way they do in coastal cities. The bigger consideration is exposure. A fingerprint reader mounted on a south-facing door near the CityCenter Englewood area takes direct afternoon sun and thermal cycling that can degrade the sensor housing over time. We position biometric hardware with Englewood’s altitude and sun exposure in mind, and we pair the lock with a mechanical key override so you’re never locked out by dead batteries or a glitch.
Key Duplication
When we duplicate keys in Englewood, we cut from the lock cylinder, not from a worn copy. A 1950s skeleton key or a decades-old Kwikset key that’s been copied six times at a big-box kiosk is worn enough that a duplicate-from-duplicate rarely works cleanly. We decode the cylinder, cut on a code machine, and test every key in the actual lock before we hand it over. If you have an acreage property with outbuildings, we cut and verify the whole set on site.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Englewood
We do factory-authorized work on Medeco, Mul-T-Lock, Abloy, Baldwin, and Schlage hardware, which means we can service high-security cylinders without voiding the manufacturer’s key-control warranty. For Englewood’s older homes, we also keep a working stock of Baldwin and Sargent mortise cylinders, springs, and tailpieces that are increasingly hard to source at local supply counters. When a 1950s street-facing mortise lock on South Broadway fails, we can usually rebuild it on site rather than asking you to cut into a vintage door.
Common Lock Installation & Rekey Problems We See in Englewood Homes
- Chinook-driven door shift binding deadbolts. Englewood sits at 5,280 feet, and when a chinook moves through in fall or winter, a 40 to 50 degree temperature swing in a few hours makes metal lock cylinders contract and door frames move. A deadbolt that worked at noon can be stuck against the strike at 7 p.m. We adjust the strike and the cylinder alignment during installation so the lock tolerates that movement instead of fighting it.
- Original mortise locks on 1940s-to-1960s bungalows. Homes throughout Englewood’s residential core, from Girard to the streets off Hampden, still carry their original mortise lock bodies. These often have worn cylinders that standard rekey kits won’t seat into. We carry mortise-specific pin kits and replacement cylinders that fit these old bodies without mangling the original brass or iron hardware.
- Renter turnover leaving old keys in circulation. The area along South Broadway and near the light-rail corridor has a renter-to-owner ratio well above the Denver metro average. We regularly rekey rental units where a previous tenant’s key was still working because a landlord skipped the rekey between turnovers. That’s a key-control failure, and we fix the whole building’s keying scheme in one visit.
- Detached garage and outbuilding locks on mismatched keys. Many Englewood homes have a detached garage or workshop that was added years after the house, with hardware keyed to a different key entirely. We rekey everything to a single key when possible, or set up a master-key system when an owner wants the house and the outbuildings on different access levels.
Pricing for Lock Installation & Rekey in Englewood, CO
Lock rekey in Englewood runs $85 to $125 for a standard residential cylinder, including the new keys and labor. Installing a standard deadbolt runs $145 to $225 depending on the grade of hardware you choose. Smart lock installation runs $185 to $265, keypad locks $165 to $245, and a full acreage rekey with multiple buildings lays out as a flat per-cylinder price plus a modest service-call charge that’s disclosed before dispatch. If you have a 1950s storefront on South Broadway and need a commercial mortise lock rebuilt, the range is $225 to $400 depending on what’s salvageable inside the lock body. Every quote is written, itemized, and delivered before work starts. There is no separate call-out fee added on arrival. Call (331) 310-8471 and we’ll give you the pencil-and-paper number over the phone.
We rekeyed a 1954 brick ranch on Girard Avenue a while back. The new owners wanted every exterior door and the detached garage keyed alike in one visit. The front door still had its original mortise lock with a worn cylinder; we pulled the mortise cylinder, installed a new pin and tumbler set matched to a Schlage deadbolt we added to the back door, and cut a fresh bump-resistant key set for the house, garage, and side gate. When the temperature dropped 45°F that night, the new deadbolt seated cleanly because we had adjusted the strike alignment during installation. That’s not luck. That’s knowing which direction a 1950s Englewood door moves when the weather turns.
We Also Serve Cities Near Englewood
While this page focuses on Lock Installation & Rekey in Englewood, our crews also run Littleton, Denver, Aurora, and Wheat Ridge regularly. If you have a property that straddles the municipal line, or you own rental units in more than one of these cities, we can key everything to one system across the whole portfolio. Dispatch and scheduling are coordinated from our Denver office; crews serve Englewood locally.
Serving Englewood, CO - Our Local Coverage Area
We’re based in the Englewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Lock Installation & Rekey in Englewood
Yes, in most cases we can rekey original mortise-lock cylinders to work with modern keys without replacing the vintage lock body, the brass faceplate, or the original door hardware. The fix is a cylinder swap: we pull the old skeleton-key cylinder, replace it with a modern pin-tumbler mortise cylinder that fits the same housing, and cut new keys to match. In rare cases where the cylinder is so worn it cannot be rekeyed safely, we source a replacement mortise cylinder rather than cutting the lock out of the door. The original hardware stays intact. Call (331) 310-8471 and we’ll walk you through what your door needs.
Yes, one visit is enough. We rekey cylinders individually, which means every lock on a property can be keyed to a single key regardless of whether the hardware is a Schlage deadbolt, a padlock, a gate latch, or an older Kwikset knob. For acreage properties with outbuildings far from the house, we bring a full mobile pin and key cutting setup so we can cut and verify every key on site. A typical property with four or five locks takes a couple of hours. If you’d rather have the house on one key and the outbuildings on another, we can key those separately and give you a master key that opens everything. Call (331) 310-8471 for an exact quote, and we’ll tell you the flat number for your specific lock count.
Chinook-driven temperature swings of 40 to 50 degrees in a few hours cause rapid thermal contraction in metal cylinders and slight frame movement in wood doors, which can bind a deadbolt against the strike. If the lock was installed without accounting for that movement, you’ll find the bolt hanging up on cold evenings or the smart lock motor straining to throw. We set the strike and cylinder alignment to allow for that seasonal movement during installation, which is part of why our deadbolts and smart locks keep seating cleanly in Englewood winters. The low ambient humidity here also works in your favor: moisture that gets into a cylinder during a snowstorm freezes solid rather than evaporating, so a well-lubricated, properly aligned lock is a real advantage. Call (331) 310-8471 if your current lock is binding when temperatures drop.
We stock and source parts for commercial mortise locksets from the 1950s, including cylinders, tailpieces, springs, and latch assemblies, and we can usually rebuild the existing lock on site without replacing the door. Replacement parts for those older South Broadway storefront locksets are scarce at standard supply houses, which is why we keep a working inventory and adapt components when the exact part is no longer manufactured. We’re comfortable fabricating springs and adjusting the internal wear points to bring a 70-year-old mortise lock back to reliable operation when the alternative is cutting into a vintage door. Call (331) 310-8471 and describe the lock. We’ll tell you over the phone what it likely needs.
We can typically rekey a multi-unit rental building within 24 to 48 hours, and in many Englewood areas we can schedule same-day or next-day service. Rekey changes the internal pins so the old keys stop working permanently, which is faster and less expensive than replacing every lock. For rental turnover, we recommend rekeying every exterior door, any unit door, and any common-area door the previous tenant had access to. If you own multiple buildings, we can set up a master-key system so you carry one key and tenants have their own unit keys. Call (331) 310-8471 for a written per-cylinder quote. The number we give you on the phone is the number on the invoice.
Key Takeaways
- Rekey in Englewood runs $85 to $125 per cylinder; smart lock installation runs $185 to $265, and every price is written before dispatch.
- We carry mortise cylinders and parts for Englewood’s 1940s to 1960s bungalows and South Broadway storefront locksets, most of which standard suppliers no longer stock.
- Our installers set strikes and alignment for Englewood’s chinook temperature swings, so deadbolts keep seating cleanly when the frame moves.
- Every visit is performed by a background-checked, uniformed technician, and you receive a documented photo record when the job is done.
- All work is backed by the 365-Day Done Right Promise and governed by The Haven Standard. Clause 1: the price on the phone is the price on the invoice.
If you need lock installation or rekey work in Englewood, call (331) 310-8471. You’ll get a live person, a written price, and a technician who knows this city’s old doors and weather swings well enough to get it right the first visit.
Written by Daniel Novak, Owner at Novak Lock & Security, serving Englewood since 2002.
Lock Installation & Rekey in Nearby Areas
