Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Lock Installation & Rekey Across Frisco
Lock installation and rekey in Frisco runs $65 to $145 for a standard rekey per cylinder and $180 to $420 for most smart lock or deadbolt installations. We quote the full price on the phone before a technician is dispatched. That price is the price on the invoice. No arrival surcharge, no upsell at the door. Novak Lock & Security serves every Frisco ZIP, from the 75036 acreage west of the Dallas North Tollway to the master-planned communities around Eldorado Parkway and Preston Road. Call (331) 310-8471 for an exact quote on your locks.
Why Novak Lock & Security Is Frisco’s Preferred Lock Installation & Rekey Company
Frisco is a city of post-2000 construction. Nearly every home we touch was built with an identical set of builder-grade locks, and nearly every homeowner we meet is either fresh from a closing table or tired of fumbling through a keyring at the back gate. We know which communities used Kwikset SmartKey in phase one and switched to Schlage B-series in phase three. That matters when you want one key for the front door, the side gate, and the detached workshop. Our Lock Installation & Rekey team has rekeyed well over 60,000 locks since 2002, and in Frisco the pattern is consistent: bulk rekeying at move-in, smart lock retrofits within six months, and seasonal deadbolt adjustments after August heat.
Every Frisco job is handled by a background-checked, uniformed technician working under The Haven Standard. You get a written price before we start, a documented photo record when we leave, and a 365-Day Done Right Promise on the work. Daniel Novak owns the company and his name is on the van. That is the entire argument.
Our Lock Installation & Rekey Services in Frisco
Frisco homeowners don’t need a generic locksmith. They need someone who understands builder-grade hardware, acreage layouts, and HOA requirements. Here is what we handle most often in this city.
Smart Lock Installation
We install Schlage Encode, Yale Assure, and Baldwin Evolved smart deadbolts across Frisco, from the 75034 neighborhoods near Stonebriar Centre to the newer 75036 builds west toward Prosper. Most installs take under an hour. We confirm deadbolt alignment before we mount anything, because a smart lock on a misaligned frame chews through batteries and fails in weeks. Frisco’s clay soil shifts door frames seasonally, so we test the throw under real conditions before we leave.
Keyless Entry & Keypad Lock
A keypad deadbolt or keyless entry handle is the most common upgrade we do in Frisco’s HOA-governed communities. It eliminates the spare key under the mat and lets you issue temporary codes for cleaners, dog walkers, or contractors working on your home. Keypad lock installation in Frisco typically runs $200 to $380 depending on brand and whether we are wiring anything for a gate. We also keypad existing deadbolts by swapping the exterior half while keeping your current cylinder.
Biometric Lock
Fingerprint and biometric locks are less common but growing in Frisco, particularly on interior doors, home offices, gun safes, and detached workshops where the owner wants controlled access without managing codes. Biometric lock installation runs $280 to $520 in most Frisco homes. We are honest about the trade-offs: biometric readers need clean, stable power and a backup method that always works. Out on an acreage lot in 75036, where a workshop sits a hundred feet from the house, a biometric cylinder with a physical key override is usually the right call.
Key Duplication
We duplicate standard keys, high-security Mul-T-Lock and Medeco restricted keys, and everything in between. If you own a rural Frisco property with a gate, a barn, and a workshop, we can key every padlock alike so you carry one key instead of five. Standard key duplication in Frisco starts at $5 per key. Restricted high-security keys require proof of ownership, which we verify before cutting anything. That policy is not negotiable and it should not be.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Frisco
We are factory-authorized on Medeco, Mul-T-Lock, Abloy, Baldwin, and Schlage, and we stock common parts for Frisco’s dominant builder hardware: Kwikset SmartKey cylinders, Schlage B-series pins, and weather-resistant gate padlocks. If you have a Mul-T-Lock high-security cylinder on the front door and a Kwikset on the barn, we can bring both onto the same key system. Sargent commercial hardware shows up occasionally on Frisco’s HOAs and clubhouse facilities, and we service that too. Parts are on the truck when we arrive, which is why most Frisco rekeys are finished in a single visit.
Common Lock Installation & Rekey Problems We See in Frisco Homes
- Deadbolts binding in August and September. Frisco’s Blackland Prairie clay expands when wet and contracts during 100°F heat. On acreage properties especially, door frames shift enough that a deadbolt stops latching by late summer. The fix is usually realignment or a deeper strike plate, not a new lock. We check the frame first.
- Builder-grade Kwikset SmartKey locks wearing out from improper rekeying. The SmartKey system is convenient, but if you rekey it with the wrong tool or a worn key, the cylinder starts failing. We see this constantly on post-2015 homes throughout Frisco. Replacing the cylinder or moving to Schlage B-series hardware is usually smarter than fighting it.
- Gates and outbuildings with mismatched keys. Frisco’s larger lots, particularly in 75036 and around the western development frontier near Lilyana, often have a front door, a side gate, a detached workshop door, and a barn, each with a different key. We key everything alike in one visit and provide weather-resistant padlocks for exterior use.
- Smart locks on gates failing from weak Wi-Fi or bad weather sealing. A smart lock on a gate 150 feet from the house will not stay connected to your home Wi-Fi. We use Z-Wave or long-range Bluetooth options and weather-sealed hardware instead. If a gate is in direct Texas sun, the housing matters as much as the electronics.
Pricing for Lock Installation & Rekey in Frisco, TX
Here is what Frisco homeowners should expect to pay. Standard rekey: $65 to $95 for the first cylinder, $18 to $25 for each additional cylinder on the same visit. New deadbolt installation: $80 to $160 in labor plus the cost of hardware, which ranges from $35 for a basic Kwikset to $220 for a Baldwin or Yale smart deadbolt. Smart lock installation: $180 to $320 in labor for a standard front door. Keypad lock installation: $200 to $380. Biometric lock installation: $280 to $520. Gate lock installation: $150 to $400 depending on whether we are running low-voltage wire or using battery power. Every price is quoted in writing on the phone before dispatch, and the technician is not permitted to change it at the door. That is Haven Standard Clause 1. Call (331) 310-8471 for a firm quote. Bring us a competitor’s written estimate and we will review it at no charge.
We Also Serve Cities Near Frisco
Novak’s Frisco crews also cover Little Elm, The Colony, Denton, and Lewisville whenever the day’s schedule allows. If you live just outside Frisco city limits, call anyway. Dispatch will tell you honestly whether a same-day or next-day slot is available for your area, and the phone is answered by a person, 24/7.
Serving Frisco, TX - Our Local Coverage Area
We’re based in the Frisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Lock Installation & Rekey in Frisco
Yes, we can key different brands onto the same key, provided the cylinders can accept the same keyway. Kwikset, Schlage, and most builder-grade hardware share compatible keyways, so we can typically rekey a house, a gate, a barn, and a workshop to one key in a single visit. High-security cylinders like Mul-T-Lock or Medeco use restricted keyways and cannot be matched to standard hardware, but we can install matching high-security cylinders across all doors if you want one key that cannot be duplicated without your authorization. Call (331) 310-8471 and we will tell you exactly what your lock setup supports.
Frisco sits on expansive clay soil that shrinks during prolonged summer heat. The soil contracts unevenly under your slab, which slightly shifts door frames out of square. That makes a deadbolt throw short or bind against the strike plate, usually worse on the side of the house that gets the most afternoon sun. The fix is realigning the strike or adjusting the frame, not necessarily replacing the lock. We see this every August on properties all over Frisco, from Phillips Creek Ranch to the larger lots near Frisco Lakes. Call us and we will check the frame before we sell you a new lock.
Yes, but we will not use a standard Wi-Fi smart lock for that application. A gate or workshop 100 feet or more from your router will not maintain a reliable Wi-Fi connection, especially in the heat. We use Z-Wave, Thread, or long-range Bluetooth hardware instead, or a keypad lock with a physical key override if you don’t need app control from inside the house. We install these on Frisco acreage properties regularly, including out near the 75036 western edge. Call (331) 310-8471 and we will spec the right hardware for your layout.
Book a rekey before you close or the same week you move in. In Frisco’s larger communities like Star Trail or Richwoods, builders install identical builder-grade Kwikset SmartKey or Schlage B-series locks across entire phases. We can rekey six to ten cylinders to one new key in under two hours. It is a single-visit job. Tell us the community and the number of exterior doors, gates, and outbuildings when you call (331) 310-8471, and we will quote a flat rekey price before we dispatch.
Not automatically, but if your home has multiple outbuildings, a gate, and a workshop, a single ANSI Grade 1 deadbolt on the main entrance is worth the $120 to $250 it costs. Builder-grade Kwikset SmartKey locks are fine for interior or low-traffic exterior doors, but they are lightweight hardware. The bigger security issue on rural Frisco acreage is usually consistency: a strong front lock does not help if the side gate or barn uses a $12 padlock. We will walk the property, name what is there, and tell you what actually needs upgrading. Bringing us a written estimate from another company gets you a free second opinion.
Written by Daniel Novak, Owner at Novak Lock & Security, serving Frisco since 2002.