Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Lock Installation & Rekey Across Glen Burnie
Lock installation and rekey in Glen Burnie needs to account for what this area throws at door hardware: salt air off Curtis Creek, freeze-thaw cycles that move wooden door frames, and homes built between 1945 and 1970 that still carry their original locks. Our crews work Glen Burnie daily, from Marley Neck Road to the Ritchie Highway corridor, and we stock the retrofit adapters and marine-grade hardware most locksmiths don’t carry on the truck. For a firm price before any work starts, call (331) 310-8471. The number on the phone is the number on the invoice. That rule has been in place since 2002.
Why Novak Lock & Security Is Glen Burnie’s Preferred Lock Installation & Rekey Company
We earn Glen Burnie’s repeat work by knowing what this housing stock actually contains. A 1958 rancher off Furnace Branch Road has different hardware than a 2005 build near Southgate. Our technicians have rekeyed original Schlage mortise locks in Cape Cods off of Baltimore Annapolis Boulevard and fitted stainless deadbolts on creek-adjacent properties where standard zinc hardware fails in two seasons. Glen Burnie customers call us because we show up with the right parts the first time, and because our Lock Installation & Rekey team writes the price down before opening a tool bag.
Every technician is background-checked and uniformed. Every job ends with a documented photo record left with the customer. That’s not a courtesy. It’s Haven Standard Clause 7, the same documentation framework applied across all ten Haven brands. Daniel Novak built Novak Lock & Security on a single rule: the price quoted on the phone is the price on the invoice, and no technician is permitted to change it at the door. If a lock isn’t done right, we make it right under the 365-Day Done Right Promise. More than 60,000 locks, keys, and systems installed or serviced since 2002, each with a written price before we started.
Our Lock Installation & Rekey Services in Glen Burnie
Whatever hardware your Glen Burnie home has, we handle installation and rekeying with parts suited to this climate. Here’s what covers most of our work in this market:
Smart Lock Installation
Smart locks on mid-century Glen Burnie homes need one thing many installers skip: a retrofitted strike plate that tolerates the seasonal movement of a 60-year-old wooden door frame. We install smart locks from Yale and Schlage with reinforced strikes and longer throw bolts so the deadbolt actually throws in February when the humidity drops and frames contract. For homes near Curtis Creek or Marley Creek, we recommend models with sealed circuits and marine-grade finish, because the salt air that pits your storm door hardware will do the same to a keypad in two years unless it’s built for it.
Keyless Entry
Keyless entry in Glen Burnie runs from simple keypad deadbolts to full keypad-and-fob systems for side doors and garage entries. If your 1960s split-level still has a worn cylindrical lockset, we can convert the existing bore to accept a keypad deadbolt without replacing the whole door. For properties along the Ritchie Highway commercial strip, we install commercial keyless entry with audit trails, the kind of system a rental car operation or extended-stay hotel uses when staff turnover is high and lost keys are a recurring cost.
Keypad Lock
Keypad locks fail in Glen Burnie for a specific reason: corrosion on the battery contacts. That’s the first thing we check on a creek-adjacent home. When we install keypad locks here, we use models with sealed battery compartments and we apply dielectric grease to the contacts before closing the cover. It takes two minutes and it means the lock keeps working through a humid August, which is when these failures spike. If an existing keypad has stopped responding, the fix is usually a contact cleaning or a cylinder swap, not a full replacement.
Biometric Lock
Biometric locks are an option for Glen Burnie homeowners who want the access speed of a fingerprint reader with a mechanical override that doesn’t rely on batteries. We install biometric deadbolts from Mul-T-Lock and Baldwin where the primary concern is who gets in, not just how. The honest caveat: a fingerprint reader exposed to Chesapeake humidity needs occasional wiping and a dry interior bore to stay reliable. We’ll show you exactly how to maintain it, and if the biometric reader ever fails, the mechanical keyway still works. That’s the point of a proper installation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Glen Burnie
We’re factory-authorized on Medeco, Mul-T-Lock, Baldwin, and Schlage, and we service Yale, Kwikset, and everything in between. For Glen Burnie homes with original mortise locks, we carry adapter kits for discontinued keyways, so a simple rekey doesn’t turn into a door replacement. For creek-side and coastal-exposure properties, we stock stainless steel and marine-grade cylinders and strikes that hold up to salt air better than the zinc hardware most big-box stores sell. If you bring us a written estimate from another shop, we’ll review it free and tell you whether it covers what you actually need. That’s our Free Second Opinion on Any Written Estimate.
Common Lock Installation & Rekey Problems We See in Glen Burnie Homes
- Seized cylinders from salt air. Homes within a quarter mile of Curtis Creek or Marley Creek get corrosion that makes the key stick or the cylinder refuse to turn. Sometimes rekeying is impossible without replacing the cylinder itself, and we’ll show you the old one so you can see the pitting.
- Misaligned strike plates from freeze-thaw movement. Wooden door frames in 1950s ranchers and Cape Cods swell in humid summers and contract in dry winter air. The deadbolt that worked in August won’t throw in February, and the fix is a realigned strike plate with longer screws into the frame, not a new deadbolt.
- Discontinued keyways in original mortise locks. Many Glen Burnie homes built before 1970 still carry mortise locksets or early cylindrical locks with keyways that aren’t made anymore. We carry adapter kits and replacement cylinders so a rekey doesn’t mean replacing the whole lockset.
- Worn-out entry locks on doors that open to the weather. Front doors on ranchers and Cape Cods face the street and take full sun, rain, and salt spray. When a Kwikset or Schlage from the 1990s finally fails, we typically recommend an ANSI Grade 1 replacement instead of rebuilding a lock that’s already at the end of its useful life.
Pricing for Lock Installation & Rekey in Glen Burnie, MD
A standard rekey in Glen Burnie runs $25 to $45 per cylinder, depending on whether we’re rekeying a common residential keyway or a discontinued mortise keyway that needs an adapter. Full lock replacement on an entry door typically runs $145 to $280 for a Grade 2 deadbolt-and-handle set, installed, with the old hardware hauled away. Smart lock installation starts around $185 and goes up with the hardware grade and whether we’re retrofitting a strike plate for a shifting door frame. If we’re replacing a salt-corroded cylinder on a creek-adjacent property, expect $35 to $60 per cylinder for the new part and installation.
Those are the honest ranges. The price you’re quoted on the phone is the price on the invoice. No call-out surcharge added when the technician arrives. No “well, it’s actually more because” conversation at the door. We’ll ask about your hardware type, the number of locks, and whether you want one key for everything, and then give you a written price before anyone is dispatched. Call (331) 310-8471 for a free estimate.
We Also Serve Cities Near Glen Burnie
Our Glen Burnie crews also cover Severna Park, Severn, Hanover, and Dundalk, so if you’re just outside the immediate area, the same pricing rules and documentation standards apply. The drive time may add a small amount to the quote, but the written-price rule does not change based on where you live.
Serving Glen Burnie, MD - Our Local Coverage Area
We’re based in the Glen Burnie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Lock Installation & Rekey in Glen Burnie
Yes. We carry adapter kits and replacement cylinders for most discontinued mortise keyways found in 1945-1970 Glen Burnie housing stock, including the early Schlage and Corbin keyways common in Cape Cods off of Jumpers Hole Road and the neighborhoods behind North County High School. If the cylinder is too corroded to rekey, we’ll show you the old part and explain whether a replacement cylinder or a full lockset swap makes more sense. On a 1960s rancher off Marley Neck Road, we rekeyed an original Schlage mortise lock that had seized from years of salt air off Curtis Creek. The lock cylinder was so corroded we had to use non-destructive entry just to remove it. We fitted an ANSI Grade 1 stainless steel deadbolt and rekeyed the remaining locks to a single key, then realigned the strike plate after the wooden door frame had shifted from freeze-thaw cycles. That’s the standard approach. Call (331) 310-8471 and tell us the lock brand and the year the house was built; we’ll tell you what’s possible.
Yes. The salt air off Curtis Creek and Marley Creek accelerates corrosion on zinc and brass lock internals, especially on doors facing the water or prevailing wind. We see pitted cylinders and seized pins on creek-adjacent homes far more than on properties off of Crain Highway. The fix depends on severity. If the cylinder can be cleaned and the pins still move, we rekey it and apply corrosion inhibitor. If the cylinder is pitted or the plug won’t turn, we replace it with a stainless or marine-grade cylinder and strike, and we’ll recommend doing every exterior lock on the house before the next humid season. The initial inspection is part of the visit; the price is written before we start.
Yes. We realign or replace the strike plate so the deadbolt throw matches where the bolt actually reaches when the frame has moved. In mid-century Glen Burnie homes with original wooden jambs, we often install a reinforced strike with screws that bite three inches into the framing, because half-inch screws in a 60-year-old jamb are the real reason the deadbolt stops lining up. If the frame movement is severe, we’ll tell you that before we install anything, so you can decide whether a jamb repair belongs on the list ahead of the new lock. We don’t sell a new deadbolt into a frame that won’t hold it.
Yes. We handle master-key and key-control work for commercial accounts along the Ritchie Highway and I-97 corridors, including extended-stay properties, rental car staging lots, and freight logistics facilities. For rekey-on-turnover, we’ll set up a removable-core or master-keyed system so your housekeeping staff and front desk carry limited keys, and a single core change rekeys a room without replacing the whole lock. We’ll provide a written scope, per-lock pricing, and a documented key-control record after every change. We serve Glen Burnie’s airport-economy businesses because that work requires discipline about key accountability, and we’ve been doing it for commercial accounts since 2002.
For a standard cylindrical lockset, rekeying runs $25 to $45 per cylinder. If the lock is a discontinued mortise keyway or the cylinder is salt-corroded, the cost runs $35 to $60 per cylinder because we’re either sourcing an adapter kit or replacing the cylinder entirely. A full lock replacement on a 1950s or 1960s rancher typically runs $145 to $280 for Grade 2 hardware installed, and $220 to $400 for ANSI Grade 1 stainless or marine-grade hardware if the door faces Curtis Creek. The decision usually comes down to one question: is the existing lock worth saving, or was it installed when the house was built? If it’s original, replacement is often cheaper over five years than rebuilding a worn, corroded lockset every season. Call (331) 310-8471 for an exact quote. Estimates are free, and the price is set before we dispatch.
For lock installation, rekeying, or a second opinion on an existing quote in Glen Burnie, call (331) 310-8471. A live person answers, 24/7. We’ll give you a written price on the phone, and that’s the price on the invoice.
Written by Daniel Novak, Owner at Novak Lock & Security, serving Glen Burnie with documented, written-price locksmith work since 2002.