Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Lock Installation & Rekey Across Haltom City
Lock installation and rekey in Haltom City usually costs between $65 and $180 per cylinder for a rekey, and $120 to $320 per lock for full replacement including hardware. Most jobs are completed same-day, and we give you the exact price on the phone before a technician is dispatched to your door on Belknap Street, Broadway Avenue, or anywhere else in Haltom City. You won’t get a different number when the van arrives.
Our technicians work Haltom City neighborhoods every week, from the ranch-home blocks east of Denton Highway to the duplex clusters near Haltom Road. We know which deadbolts still turn smoothly and which original 1960s hardware should be retired rather than rekeyed. Call (331) 310-8471 and a live person answers, any hour.
Why Novak Lock & Security Is Haltom City’s Preferred Lock Installation & Rekey Company
Daniel Novak founded this company in 2002 on a rule that still governs every job: the price quoted on the phone is the price on the invoice. That rule is Haven Standard Clause 1, and our technicians are not permitted to change it at your door. In a trade where bait-pricing is common, we put the number in writing before we dispatch anyone.
Haltom City customers call us for the same reason a landlord with six rental units on Jane Lane calls us: we show up when we say we will, and we leave a documented photo record of the work. That record shows the condition of the lock before, the work performed, and the finished result. It is standard on every visit, not an upgrade.
Our response time to most Haltom City addresses is under 45 minutes for lockouts, and same-day for scheduled rekeys and new installations. Because our crews work the Fort Worth side of the metro daily, we’re not scheduling you into a queue behind a Dallas call. We dispatch from the Dallas-Fort Worth area and serve Haltom City locally.
Our Lock Installation & Rekey Services in Haltom City
Our full Lock Installation & Rekey team covers everything from a single deadbolt replacement on a 1955 ranch on Fincher Road to a full commercial rekey of a Denton Highway strip unit. Here are the services Haltom City homeowners and landlords call us for most.
Smart Lock Installation
Smart locks get requested often in Haltom City, but the older wood doors here need an honest conversation first. A modern keypad deadbolt drops into a standard 2-1/8 inch bore, but many 1950s and 1960s doors in this city have smaller, irregular bores that need careful enlargement, and warped frames from Texas heat can cause bolt misalignment with the strike plate. We check the door, the frame, and the existing bore before quoting, so you know if your Schlage Encode or Yale Assure will sit square and lock cleanly through a Haltom City summer. Expect $180 to $380 for smart lock installation including the lock, depending on whether door prep is needed.
Keypad Lock Installation
Keypad locks are the most practical upgrade for Haltom City’s rental-heavy stock. Landlords cycling tenants off Baker Boulevard or Haltom Road don’t want to rekey or replace keys between every lease. A keypad deadbolt with a master code eliminates that problem. We install and program keypad locks from Schlage and Yale, and we show you or your property manager how to add and delete codes before we leave. Installation typically runs $150 to $300 per door with the lock included, quoted in writing before we start.
Keyless Entry Systems
For the small commercial units along Denton Highway, keyless entry often makes more sense than rekeying a mortise lock every time a taquería or tienda changes hands. A commercial-grade keypad or fob system lets the new owner delete every prior code and start fresh. These jobs are surveyed and scheduled, not dispatched by the hour. We provide a written scope and a flat per-door price, so you know the full cost before we order a single part.
Biometric Lock Installation
Biometric locks, the fingerprint-reading deadbolts, are a niche product but one some Haltom City business owners ask about for inventory rooms and offices. These locks need a clean power source and a stable door frame; an old wood frame that shifts with humidity will cause the fingerprint reader to misalign with the bolt. We install biometric hardware from brands like Yale and Baldwn when the door can support it, and we will tell you plainly if your door cannot. Because these are specialized devices, every biometric job starts with a written scope and a firm quote.
We also handle standard deadbolt installation, lock replacement, and key duplication in Haltom City. Key duplication on standard Schlage and Kwikset blanks is a walk-in job at most hardware counters, but if you need Medeco or Mul-T-Lock keys duplicated, those are restricted high-security blanks that require a factory-authorized locksmith. That’s us.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Haltom City
We are factory-authorized to work on Medeco, Mul-T-Lock, Baldwin, and Schlage hardware, and we carry common replacement parts for the Kwikset and Schlage locks found throughout Haltom City’s older homes. When a 1960s Kwikset cylinder is too worn to rekey securely, we don’t tell you to wait a week on a special order. We carry replacement Kwikset cylinders on the truck. For high-security cylinders from Medeco and Mul-T-Lock, we cut and register restricted keys through the factory system, so no one can duplicate your keys at a hardware counter. That matters on a rental property where key control is the whole point.
Common Lock Installation & Rekey Problems We See in Haltom City Homes
- Worn-out cylinders on original 1950s and 1960s deadbolts: The pins inside a 60-year-old lock have been cycled tens of thousands of times. Rekeying without replacing the cylinder leaves the lock functional but insecure; worn pins skip and old keys may still turn. We rebuild or replace the cylinder, not just the pins.
- Warped wooden door frames binding deadbolts: North Texas summers regularly push past 100°F, and the original wood-frame doors on Haltom City ranch homes swell significantly. A deadbolt that turns fine in January may bind hard by July. Sometimes the fix is strike plate adjustment; sometimes the frame itself needs planing before a new lock will work at all.
- Mortise locks on Denton Highway storefronts never changed between tenants: When a taquería or tienda takes over an older strip unit, the prior tenant’s keys often still open the door. These mortise-style locks are not always straightforward to rekey; some need new cylinders, and some need full mortise body replacement. We inspect and tell you which before touching the hardware.
- Seized padlocks on detached garages and storage sheds after hard freezes: The February 2021 freeze did real damage to exposed padlocks on detached garages and gates throughout Haltom City. We open these non-destructively where possible and then rekey or replace the padlock so you aren’t cutting it off with bolt cutters next winter.
Pricing for Lock Installation & Rekey in Haltom City, TX
What changes the price? The condition of the cylinder, whether the door frame is so warped that strike adjustment is needed, and which keyway your existing hardware uses. Obsolete or non-standard keyways from the 1960s can make cylinder sourcing more expensive. You will get the full number on the phone, in writing, before a technician is dispatched. There is no call-out surcharge added on arrival, and no “technician will give you the real price at the door” routine. That has been our rule since 2002, under Daniel Novak’s original mandate, and it is written into the Haven Standard. If you have another locksmith’s written estimate, bring it to us and we will review it at no charge.
We Also Serve Cities Near Haltom City
Our crews working Haltom City also serve Fort Worth, North Richland Hills, Hurst, and Bedford on the same schedule. If you own rentals spread across the Tarrant County inner ring, one call covers rekeys from Haltom City to Hurst. Call (331) 310-8471 and tell the dispatcher which properties you need done.
Serving Haltom City, TX - Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Lock Installation & Rekey in Haltom City
My 1950s Haltom City rental has an original deadbolt that’s hard to turn every summer. Can you just rekey it, or does it need replacing?
Most of the time on a 1950s original deadbolt, the cylinder is too worn for a meaningful rekey, and the summer binding is coming from the wood door frame swelling in the heat. We will rekey it only if the cylinder still holds pins securely; if it doesn’t, we replace the cylinder and keep your original trim so your keys still match the door’s look. Then we’ll show you where the frame is binding and what adjustment will stop the seasonal stiffness. Call (331) 310-8471 for an exact quote before we dispatch.
I just bought a taquería on Denton Highway and the prior owner never changed the locks. Do you rekey mortise locks on older storefronts?
Yes, we rekey mortise locks on older Denton Highway storefronts regularly, and this is one of the more common new-tenant calls we get in Haltom City. Some mortise bodies can be rekeyed with a new cylinder; some older mortise bodies are so worn that full lock replacement is the only secure option. We inspect the body, tell you which route is needed and what it costs, and then do the work with a documented photo record when we’re done. Estimates are free, and the phone quote is the invoice price.
How much cheaper is rekeying than replacing all the locks on an older rental in Haltom City?
Rekeying typically runs $65 to $110 for the first cylinder and $15 to $25 per additional, while replacing each lock with new hardware runs $120 to $220 per door. On a rental with four exterior doors, rekeying is usually less than half the cost of full replacement. But if the original cylinders are worn out, rekeying is a false economy; the lock will feel fine for a month and then start slipping. We’ll tell you which path is actually secure for your property. Call (331) 310-8471 for a free, written estimate.
Can you install a smart lock on my original wood door in Haltom City, or will the heat warp it out of alignment?
We install smart locks on original wood doors in Haltom City when the bore is standard and the frame is not so warped that the bolt will bind in August. On many 1940s through 1970s ranch homes, the door has swollen and shifted over decades, and the deadbolt hole no longer lines up with the strike plate. We check alignment before installing, and if the frame needs minor adjustment we can usually do it on the same visit. You’ll know before we cut anything. Call (331) 310-8471 and describe your door; we’ll give you a straight answer.
After the 2021 freeze, my detached garage padlock seized up and I can’t get in. Do you handle non-destructive entry for padlocks and then rekey?
Yes. We open most seized padlocks non-destructively using bypass techniques that work on common hardware-store padlock designs, and then we either rekey the padlock if it’s serviceable or replace it with a new one that tolerates freeze cycles better. Detached garage and shed padlocks took a beating in February 2021 throughout Haltom City, and we’ve done hundreds of these since. Call (331) 310-8471 and we’ll get you back into your garage.
Call Novak Lock & Security for Lock Installation & Rekey in Haltom City
We don’t do teaser prices, and we don’t change the number at your door. What we do is show up on time, inspect your lock or door, tell you what the hardware actually needs, and put every price in writing before the first screw turns. That applies whether you need one rekeyed deadbolt on a rental off Belknap Street, full smart lock installation on a ranch home near Haltom Road, or a commercial mortise overhaul on Denton Highway.
Call (331) 310-8471 to get your free estimate. A live person answers. The price you hear is the price you pay. That has been the Novak rule since 2002, and it is the only way we work.
Written by Daniel Novak, Owner at Novak Lock & Security, serving Haltom City and the surrounding Tarrant County area.
Lock Installation & Rekey in Nearby Areas
