Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Lock Installation & Rekey Across Lake Worth
Lock installation and rekeying in Lake Worth usually costs $75-$165 for a standard cylinder rekey and $120-$320 for a new deadbolt installation, labor included for most common door types. Novak Lock & Security dispatches background-checked, uniformed technicians to Lake Worth neighborhoods including the historic downtown district, College Park, Mango Groves, and Parrot Cove, typically arriving within 60 minutes for scheduled work and faster for lockouts. Call (331) 310-8471 and the dispatcher will quote a firm price on the phone. That price is the price on the invoice. It has worked that way since 2002.
Why Novak Lock & Security Is Lake Worth’s Preferred Lock Installation & Rekey Company
We work on the doors that other locksmiths walk away from. Lake Worth’s older rental stock, particularly the 1920s-1940s bungalows and Mediterranean Revival homes east of Dixie Highway, routinely presents layered hardware from different decades. An original mortise lock body in the door stile, a 1970s knob set bored through beside it, and a pitted surface-mounted deadbolt added later are all common. We document what we find, explain it in plain language, and quote the fix in writing before the first tool comes out.
Every technician is background-checked and uniformed, and every visit ends with a photo record of the work left with you. That applies whether we are rekeying a single cylinder off Lucerne Avenue or rebuilding a mortise lock on a 1930s rental near the Intracoastal Waterway. Daniel Novak set the standard: write the price down, do the work correctly, and leave evidence. That is The Haven Standard, and it governs every job.
Our Lock Installation & Rekey team knows which cylinder grades survive salt air and which ones seize in a year. We stock marine-grade hardware and corrosion-resistant strikes for exactly this climate, so we do not put a builder-grade Kwikset back into a door five blocks from the Lake Worth Lagoon and call it fixed.
Our Lock Installation & Rekey Services in Lake Worth
Smart Lock Installation
Smart locks fail fast in Lake Worth when they are not rated for humidity and salt exposure. We install Yale and Schlage smart deadbolts with sealed electronic assemblies, and we do not mount a unit until we have confirmed the door alignment, the throw length, and the condition of the existing strike. On older Lake Worth doors with layered hardware, we rebuild the mounting surface before the smart lock goes on. A smart lock screwed into a stripped-out hollow-core door is a liability, not an upgrade.
Keyless Entry
Keyless entry is the standard answer for Lake Worth landlords managing tenant turnover. A keypad deadbolt means no key handoff, no rekey every six months, and a code audit trail. We fit keyless entry systems on rental bungalows near downtown, on CBS homes in the 1950s-1970s blocks west of I-95, and on multi-unit properties along the Lagoon. The typical installed cost for a single-door keyless deadbolt in Lake Worth runs $180-$350, quoted in writing before we start.
Keypad Lock
Standalone keypad locks are quicker to install than full smart locks and hold up better in rental service. A mechanical keypad deadbolt with no Wi-Fi, no battery app, and no hub is the most reliable option for a Lake Worth door that sits vacant all summer. We stock keypad locks from Schlage and Baldwin. If a keypad lock does include electronics, we recommend a model with sealed contacts and stainless internals. Salt-laden air off the Lagoon corrodes exposed circuit boards within two years.
Biometric Lock
Biometric fingerprint locks are a growing request from Lake Worth homeowners who want a deadbolt they cannot lose a key to. The honest caveat here: a fingerprint reader on a front door facing east into daily sun and salt breeze needs a sealed sensor. We install biometric locks where the mounting surface is solid and the door alignment is correct, and we tell you when your existing door hardware will not support one cleanly. Typical biometric deadbolt installation in Lake Worth runs $250-$500, including hardware.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lake Worth
We install and service Medeco high-security cylinders, Mul-T-Lock telescoping pins, Baldwin mortise locks, and Schlage B-series deadbolts. For rental properties near the Lake Worth Lagoon, we prefer Baldwin mortise lock rebuild kits and Schlage B60 marine-grade deadbolts because they stand up to the corrosion cycle. We keep the common parts for these brands in stock for our Lake Worth service calls. That means a rekey or cylinder replacement does not wait for a shipped part while a rental unit sits vacant during tenant turnover.
Common Lock Installation & Rekey Problems We See in Lake Worth Homes
- Seized mortise lock bodies on 1920s-1940s bungalows. Salt-laden air penetrates the lock case and dries out the internal lubrication, so deadbolt throws stick or fail entirely. This is the single most common call we run east of Dixie Highway.
- Corroded builder-grade cylinders in CBS rental units. Homes built in the 1950s-1970s often still have original Kwikset cylinders that sit unlubricated all summer while owners are up north. Keys snap off in these cylinders, or the cylinder refuses to turn.
- Stripped surface-mounted deadbolts on hollow-core doors. Repeated tenant lockouts tear the screws out of the thin door skin. You cannot rekey a deadbolt that is hanging off the door. The fix is a security strike plate and a frame reinforcement, not another screw.
- Layered hardware from different eras. An original 1930s mortise lock, a 1970s knob set bored through beside it, and a later surface-mounted deadbolt all in one door. A standard rekey is not possible until we survey what is actually load-bearing in that door.
Pricing for Lock Installation & Rekey in Lake Worth, FL
A standard rekey of one cylinder in Lake Worth runs $75-$165, depending on the cylinder type and whether it is a Kwikset, Schlage, or a high-security keyway like Medeco or Mul-T-Lock. Installing a new deadbolt on a prepared door runs $120-$250. Rebuilding an original mortise lock, common on pre-WWII bungalows near the downtown historic district, runs $300-$550 including the rebuild kit and labor. Smart lock installation starts around $180 and goes up from there based on the door’s condition and the unit selected.
What changes the price in Lake Worth is not the service call, it is the condition of the door. A hollow-core rental door that has been patched twice takes longer to make solid than a clean CBS door west of I-95. You will know the full price before a dispatcher schedules a technician. No added surcharge on arrival. No estimate revised at the door. Call (331) 310-8471 and ask for a written quote.
We Also Serve Cities Near Lake Worth
Novak Lock & Security serves the full Lake Worth corridor and the surrounding Palm Beach County communities. You will find our technicians in Lake Worth and in Wellington, Royal Palm Beach, Boynton Beach, and West Palm Beach, running the same written-quote standard on every job. Dispatch and scheduling are coordinated from our South FL office; our crews live and work in this service area.
Serving Lake Worth, FL - Our Local Coverage Area
We’re based in the Lake Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Lock Installation & Rekey in Lake Worth
Salt-laden air off the Lake Worth Lagoon carries fine salt particles into lock cylinders and mortise lock bodies, where they absorb moisture and corrode the internal pins, springs, and brass housing. Locks on east-side rentals fail two to three times faster than identical locks installed five miles inland. Add in months of vacancy every summer when snowbird owners are away and the locks go unlubricated, and you get seized cylinders and snapped keys. The fix is marine-grade hardware with sealed internals, not the cheapest deadbolt at the hardware store. Call (331) 310-8471 and we will give you a written quote for the right hardware.
Often, yes, if the mortise lock body itself is still sound. We can non-destructively pull the cylinder, rekey it, and service the internal mechanism. What we cannot do is rekey a mortise lock body that has rusted through or cracked. On a 1920s Craftsman bungalow off North Dixie Highway, our tech found the original mortise body still in the door, a 1970s knob set bored through beside it, and a pitted surface-mount deadbolt added later. The cylinder was seized solid. We removed it, installed a Baldwin mortise rebuild kit and a Schlage B60 deadbolt, and cut a master key system for the landlord to handle turnover. That is the typical path on these doors.
A marine-grade Schlage B60 deadbolt with a stainless or brass exterior and sealed internals is the workhorse for coastal Lake Worth rentals. Pair it with a Baldwin mortise rebuild kit if the original lock body is still in the door. Skip the bare-basement Kwikset. Skip any smart lock with an exposed circuit board. Expect to spend $150-$350 per door for hardware that will survive more than one summer season. The written quote we give you before dispatch includes the hardware, the labor, and the photo record at the end.
We survey the door first and identify what is actually holding the door shut. In most of these bungalows, the original mortise lock body is still functioning or close to it, and the later hardware was added because someone did not want to service the mortise. The order of work is: remove the dead cylinder, determine if the mortise body is rebuildable, remove the non-functional surface hardware, reinforce the strike and frame where a hollow-core door has stripped out, and install one coherent lockset instead of three patches. You get a photo record of all of it. Call (331) 310-8471 for an exact written quote.
At minimum, rekey every exterior cylinder. A rekey in Lake Worth costs $75-$165 per cylinder and changes the key pattern so old keys no longer operate the lock. If the locks are corroded, seized, or stripped from the last turnover, replacement is faster and more reliable than attempting a rekey. Given how quickly units turn over in Lake Worth’s rental-dense blocks near the Intracoastal, most landlords we work with move to keyless entry or master key systems after the second or third rekey on the same door. We will quote the rekey and the replacement side by side, in writing, before you decide.
Written by Daniel Novak, Owner at Novak Lock & Security, serving Lake Worth and Palm Beach County.