Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Lock Installation & Rekey Across Pinellas Park
Lock installation and rekeying in Pinellas Park runs into a problem most Tampa Bay locksmiths don’t stock for: your doors. A standard deadbolt kit that drops cleanly into a 1-3/4″ wood door in Clearwater will not fit the 1-3/8″ aluminum door on half the mobile homes in Pinellas Park. We know because we work here weekly. Lock rekey in Pinellas Park typically costs $25-$45 per cylinder, and a standard deadbolt install runs $120-$190 with hardware. The phone number is (331) 310-8471. Call it and you’ll get a firm price before anyone gets in a van.
This page covers exactly what Pinellas Park’s split housing stock means for your locks: thin-door mobile home hardware, corroding 1950s-70s CBS-block cylinders, and which jobs get rekeyed versus replaced. It’s the information most locksmiths learn by failing on your doorstep.
Why Novak Lock & Security Is Pinellas Park’s Preferred Lock Installation & Rekey Company
We’re not the cheapest call-out in Pinellas County and we don’t try to be. We’re the one that puts a written price on the table before work starts. That rule has been in place since 2002, and it’s codified as Haven Standard Clause 1: the price on the phone is the price on the invoice. Daniel Novak built the company on that single sentence.
Our crews drive into Pinellas Park from the metro office and know the area’s lock problems by name. 66th Street, Park Boulevard, the mobile home communities off US 19, the CBS-block neighborhoods north of 49th Street: we’ve rekeyed, replaced, and repaired hardware in all of them. Every tech is background-checked, uniformed, and leaves a documented photo record with you when the job is done. That’s not a courtesy. It’s procedure under The Haven Standard, the same quality framework applied across all ten Haven brands.
If something’s not right within 365 days, we come back and make it right. That’s the 365-Day Done Right Promise, and it applies to every lock installation, rekey, and emergency call we make in Pinellas Park.
Our Lock Installation & Rekey Services in Pinellas Park
Our Lock Installation & Rekey work in Pinellas Park covers standard cylinders, deadbolts, mortise locks, and the thin-door hardware this city’s mobile home stock demands. Four services matter most here:
Smart Lock Installation
Pinellas Park homes run the full range: new construction near Mainlands, 1970s CBS-block, and manufactured homes on compact lots. A smart lock install here means matching the lock to the door, not forcing it. We install keypad, Wi-Fi, and Bluetooth deadbolts from Schlage, Kwikset, and Yale, and we tell you honestly if your existing door prep won’t support one. Smart lock installs in Pinellas Park run $180-$320 including hardware.
Keypad Lock Installation
Keypad deadbolts are the most requested upgrade in Pinellas Park right now, especially for rental properties and homes where multiple family members come and go. We stock keypad locks with physical key overrides, so you’re not locked out when the battery dies. Installation runs $140-$240 per lock. On a thin mobile home door, we use extended-latch hardware and reinforced plates, not a standard kit forced into a narrow jamb.
Biometric Lock Installation
Fingerprint locks work fine in Pinellas Park’s humidity if you buy the right grade. Cheap biometric locks with exposed sensors fail fast in salt air. We install commercial-grade fingerprint and keypad combos from brands that rate their electronics for coastal conditions. Expect to pay $250-$450 per lock. We’ll tell you if a wet-hand fingerprint read is going to frustrate you before you spend the money.
Key Duplication
Key duplication in Pinellas Park isn’t a vending-machine job, especially when the original key is worn or was cut on an old Kwikset keyway. We cut and code keys by hand and machine, check them in the lock before we hand them back, and tell you when the cylinder itself is too worn to make a reliable copy. Standard key copies run $3-$8 each. High-security Medeco or Mul-T-Lock keys require a card from the original locksmith, and we process those by appointment with documentation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pinellas Park
We’re factory-authorized for Medeco, Mul-T-Lock, and Baldwin, and we service Schlage, Kwikset, and Yale daily. Pinellas Park’s older stock means we keep a deeper bench than most: mortise cylinders, thin-door latches, extended bolt throws, and ANSI Grade 1 deadbolts sized for 1-3/8″ aluminum doors. When we say we’re stocked for Pinellas Park, we mean the parts are in the van, not on a three-day order from a distributor in Tampa.
Common Lock Installation & Rekey Problems We See in Pinellas Park Homes
- Thin-door deadbolts that were never going to fit. A standard 1-3/4″ deadbolt kit physically cannot seat in a 1-3/8″ aluminum door without cutting the jamb apart. We carry thin-door hardware with shorter bolt throws and reinforced strikes specifically for Pinellas Park’s mobile home communities.
- Seized cylinders from salt-laden humidity. Pinellas Park sits on the Pinellas Peninsula with Tampa Bay to the east and the Gulf corridor to the west. Locks here corrode from the inside out. We regularly find cylinders that turn fine on the bench but seize under load, and keys that snap when forced into a frozen plug.
- Original mortise locks that don’t align anymore. CBS-block homes from the 1950s-70s shift and settle. A rekey is easy. A rekey where the latch no longer retracts the bolt because the door has warped is a different job. We check latch alignment before we rekey so you don’t end up with a cylinder that turns and a door that won’t open.
- Rekeyed hardware with mismatched keyways. We see it constantly: someone rekeyed three locks but two have a Kwikset keyway and one has a Schlage keyway, so the customer carries two keys and thinks that’s normal. It isn’t. We match cylinders or repin to a single key when the hardware allows it.
Pricing for Lock Installation & Rekey in Pinellas Park, FL
Here’s the honest range for the work we do in Pinellas Park. Rekeying a standard cylinder: $25-$45 per lock. New deadbolt installation with hardware: $120-$190. Smart lock or keypad install: $140-$320 depending on the lock grade. Key duplication: $3-$8 standard, more for high-security or worn-original cuts. Full home rekey, five cylinders: $110-$160 with all keys included.
What moves the price in Pinellas Park specifically: thin-door hardware adds $15-$30 per lock because the plates and bolts are specialty parts. Corroded cylinders that need extraction add labor. If your door is warped, realigning the strike requires shimming and test-fitting before the rekey is finished. None of that is hidden. We walk the price before we start and it doesn’t change at the door. That’s Clause 1, and it has been since 2002.
We also offer a free second opinion on any written estimate. Bring us a competitor’s quote from anywhere in Pinellas Park and Daniel or a crew lead will review it at no charge.
We Also Serve Cities Near Pinellas Park
We work across the central Pinellas corridor. If you’re in Dunedin, Largo, Clearwater, or Tampa, we can schedule the same thin-door rekey or CBS-block mortise repair we do in Pinellas Park. Call (331) 310-8471 and tell the dispatcher your city and door type. The price you’re quoted is the price you pay, from the first lock to the last.
Serving Pinellas Park, FL - Our Local Coverage Area
We’re based in the Pinellas Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Lock Installation & Rekey in Pinellas Park
In most cases we can rekey the original mortise lock if the case and latch body are still in good condition. We remove the cylinder, repin it to a new key, and test the latch throw before we call it done. If the lock body is cracked or the latch is so worn it won’t retract, replacement is the honest call. Schedule a service in Pinellas Park and the tech will show you exactly what’s failing before any work starts. Call (331) 310-8471 for a written price.
Because Pinellas Park sits on a peninsula with salt-laden air moving in from Tampa Bay to the east and the Gulf corridor to the west. That humidity settles into cylinders and deadbolt throws, and even a home a few years past its last rekey can have a seized plug we have to extract. We disassemble and lubricate the internals rather than forcing a jammed key, which is how keys snap and turn a $30 rekey into a $150 extraction. If your key is getting stiff in the lock, get it rekeyed before it fails. Estimates are free.
Showing up with a standard 1-3/4″ deadbolt kit for a 1-3/8″ aluminum door. The bolt throw is too long, the strike doesn’t seat, and the jamb can’t take the screw depth. We carry thin-door hardware for exactly this reason and we stock it in the vans that serve Pinellas Park’s mobile home communities. You’ll know within the first five minutes of the estimate whether your door needs specialty hardware, because we’ll have it measured before we quote. Call (331) 310-8471 and tell us the door type.
You can, but the lock grade matters. Pinellas Park’s humidity corrodes exposed electronics and cheap actuator motors. We install smart locks built for coastal environments with sealed electronics and manual key overrides. On a warped CBS-block door, the smart lock’s bolt path has to be tested under load, not just with the door open. We do that before we leave. Smart lock installs in Pinellas Park start around $180 with hardware and we quote the full price on the phone.
Yes. We stock ANSI Grade 1 deadbolts in standard and thin-door configurations, plus bump-resistant high-security cylinders from Medeco and Mul-T-Lock for customers who want more than a standard Kwikset or Schlage. On a mobile home door, the Grade 1 rating only matters if the strike is reinforced, so we upgrade the plate as part of the install. A high-security deadbolt install in Pinellas Park runs $220-$400 depending on cylinder choice. Call (331) 310-8471 for a firm number.
Get a Written Price for Lock Installation & Rekey in Pinellas Park
If you live in Pinellas Park and your locks were installed when the house was built, it’s likely time to understand what you actually have. We’ll come out, look at the door prep, measure the thickness, test the existing cylinders, and give you a written scope and a firm price before any work begins. The dispatcher answers live, 24/7. The tech shows up uniformed and background-checked. And the invoice at the end matches the number you were quoted on the phone. Call (331) 310-8471 for a free estimate, or bring us a competitor’s quote and we’ll review it at no charge.
Written by Daniel Novak, Owner at Novak Lock & Security, serving Pinellas Park with written-price lock installation and rekey work.
Lock Installation & Rekey in Nearby Areas