Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Lock Installation & Rekey Across Plainfield
Lock installation and rekey in Plainfield is two jobs under one heading, and they solve different problems. A rekey changes the key, not the lock: we pull the cylinder, swap the internal pins, and hand you new keys while the old ones stop working. An installation replaces the hardware entirely. In Plainfield, we do both, and we quote the price for either in writing before a tech ever pulls into your driveway. Call (331) 310-8471 and you’ll get a firm number on the phone, not a range that changes at the door.
Plainfield’s housing stock is newer than what you’d find in urban Indianapolis. Most homes built here since the 1990s came with builder-grade Kwikset or Schlage hardware keyed alike across entire subdivisions. That shapes the work: we rekey far more homes here than we do full replacements. But the logistics corridor along Ronald Reagan Parkway and I-70 adds a commercial layer most residential towns never see. Master key systems, high-security cylinders, and access control on loading docks are routine calls for our Lock Installation & Rekey crews in Plainfield.
Key takeaways:
- Rekeying a standard exterior lock in Plainfield typically runs $65-$95 per cylinder, quoted in writing before we start.
- New deadbolt installation runs $120-$220 per door depending on the hardware grade and prep work needed.
- Master key system work, common along the I-70 logistics corridor, is scoped and priced per door after a free site assessment.
- We serve all of Plainfield including the subdivisions off Stafford Road, the commercial parks on Perry Road, and everything around Metropolis Mall.
Why Novak Lock & Security Is Plainfield’s Preferred Lock Installation & Rekey Company
Daniel Novak founded this company in 2002 on one rule that still governs every job: the price on the phone is the price on the invoice. That’s Haven Standard Clause 1, and it exists because this trade has a documented problem with bait pricing. You call, you get a low number, and then the tech “finds” something at the door. We’re contractually prohibited from doing that. The dispatcher gives you a written scope and a firm price before anyone is scheduled, and the technician is not permitted to change it on arrival.
Plainfield customers see a specific pattern from us. A homeowner in a Saratoga subdivision calls because they lost a key. We rekey four exterior locks, key them all to a single new key, and leave a photo record of every cylinder we touched. A warehouse manager off Perry Road calls at 2 AM because a frozen lock cylinder seized a roll-up door. We perform non-destructive entry, swap the cylinder, and rekey it to their existing master key without disrupting a single employee badge. Same company, same standard, same documentation either way.
Our dispatchers answer the phone around the clock with a live person. No voicemail queue, no callback window. You call at 3 AM from a loading dock near the Ronald Reagan Parkway interchange and you talk to a human who can dispatch a tech to Plainfield immediately.
Our Lock Installation & Rekey Services in Plainfield
Here’s what we actually do in Plainfield week to week, and how each service applies to the homes and buildings we see here.
Smart Lock Installation
Smart locks are the most common upgrade request we get in Plainfield subdivisions, and the most common failure we get called to fix after a DIY attempt. The issue is usually door prep. Newer Plainfield homes had one of two door slab thicknesses: 1-3/8″ or 1-3/4″. Many smart lock kits assume one standard; if your slab is the other, the deadbolt won’t align and the lock either won’t throw or the keypad drains batteries fighting a misaligned bolt. We install smart locks the right way, including drilling a properly sized cross-bore when needed and ensuring the tailpiece lines up. Smart lock installation in Plainfield runs $175-$350 including the hardware and programming.
Keyless Entry and Keypad Locks
Keypad entry is standard on newer Plainfield homes but often poorly executed by original builders. The most common complaint we hear: the keypad works fine but the physical key override doesn’t, meaning the builder installed a keypad deadbolt without properly rekeying or even fully engaging the cylinder. We install new keypad locks and rekey the cylinder so both entry methods work. We also add keypad entry to commercial doors throughout the logistics parks, programmed to shift schedules for 24/7 operations. Keypad lock installation in Plainfield runs $140-$280 per door.
Biometric Locks
Biometric locks are less common in residential Plainfield, but we see growing demand from commercial clients who need audit trails on sensitive rooms. A fingerprint reader stores a biometric template, not an image, and the better units log every entry attempt. For Plainfield warehouses, we typically install biometric locks on server rooms, HR file rooms, and any door where an access log matters. Residential biometric installations run $220-$500 per door. Commercial is scoped after a site walk.
Master Key Systems
This is the service that sets Plainfield apart from any neighboring town. The logistics corridor means dozens of warehouses, distribution centers, and fulfillment operations need tiered access: a facility manager key that opens everything, a supervisor key that opens a department, and an employee key that opens one door. We design and install master key systems with Medeco or Mul-T-Lock cylinders, and we rekey additions into an existing system without invalidating a single key. This is scheduled work with a written scope and flat per-door pricing, not an emergency call.
Key Duplication
Standard key duplication in Plainfield is straightforward for Kwikset and Schlage blanks. High-security keys from Medeco, Mul-T-Lock, or Abloy require a signed authorization card, which we verify before cutting. We never cut high-security keys without the proper documentation. Key duplication runs $3-$12 for standard keys, $15-$35 for high-security blanks when authorized.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Plainfield
We stock parts for the brands actually installed across Plainfield: Schlage and Kwikset for residential, Yale for commercial keypad and exit devices, and Baldwin for higher-end residential hardware. For high-security work, we’re factory-authorized on Medeco and Mul-T-Lock cylinders, which means we can order restricted keyways and cut keys in-house that most locksmiths in this corridor can’t. That matters for master key systems where you need key control and can’t risk unauthorized copies. We carry replacement cylinders and common mortise and cylindrical parts on our trucks, so most Plainfield jobs finish same visit.
Common Lock Installation & Rekey Problems We See in Plainfield Homes
- Keyed-alike builder hardware across a whole subdivision. If your home was built in a Saratoga, Coventry, or Legacy Farms development in the last 20 years, the original locks probably share a keyway pattern with dozens of other homes. One lost key means a full rekey of every exterior door. We rekey all of them in a single visit and key everything to one new key.
- Freeze-cracked cylinders on commercial doors. Indiana’s freeze-thaw cycles push moisture into exterior lock cylinders on Plainfield’s loading docks and retail entrances. When that moisture freezes, the cylinder cracks or seizes. We see this every January and February on Reagan Parkway and Perry Road. The fix is a cylinder swap and rekey to the existing key, and we stock graphite lubricant and replacement cylinders for exactly this.
- Misaligned deadbolts from DIY smart lock installs. Newer Plainfield doors sometimes have non-standard bore holes or slightly thick slabs. A homeowner installs a smart lock, the bolt doesn’t fully throw, and the door is technically unsecured. We fix the preparation and reinstall the lock properly. If you’re uncertain, call before you drill.
- Worn or bent deadbolts on high-traffic doors. Garage entry doors and back doors take a beating in Plainfield’s suburbs, especially in homes with kids and dogs. A bent bolt won’t fully seat in the strike plate, and the lock feels “loose.” This is a replacement, not a rekey, and it’s a fast job: $120-$180 typically.
Pricing for Lock Installation & Rekey in Plainfield, IN
Plainfield’s pricing is consistent with the Indianapolis metro, but the mix of work here skews commercial more than Avon or Brownsburg. Here’s what we quote on the phone:
| Service | Price Range in Plainfield |
|---|---|
| Rekey standard lock (per cylinder) | $65-$95 |
| Rekey entire home (4-6 locks) | $240-$420 |
| New deadbolt installation (standard) | $120-$180 per door |
| Smart lock installation | $175-$350 per door |
| Keypad lock installation | $140-$280 per door |
| Biometric lock installation (residential) | $220-$500 per door |
| Master key system (commercial) | Scoped per door after site assessment |
| Key duplication | $3-$12 standard, $15-$35 high-security |
The price we quote on the phone is the full price. No call-out surcharge added on arrival, no service fee stacked on top of the labor. This is Haven Standard Clause 1, and it has been since Daniel Novak opened the company in 2002. For commercial work like a master key system along Ronald Reagan Parkway, we schedule a free site assessment, then deliver a written scope with a flat per-door price before any work starts.
Call (331) 310-8471 for an exact quote. Estimates are free, and the number is firm.
We Also Serve Cities Near Plainfield
Lock Installation & Rekey in Plainfield is our focus, but our techs also run calls to Greenwood, Indianapolis, Carmel, and Westfield. Same firm pricing, same documentation, same 24/7 dispatch. If you’re just outside Plainfield and need a lock rekeyed or a deadbolt replaced, call and we’ll confirm coverage.
Serving Plainfield, IN - Our Local Coverage Area
We’re based in the Plainfield area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Lock Installation & Rekey in Plainfield
Yes. We identify the brand and cylinder type on site. Most Plainfield homes built since the 1990s use Kwikset or Schlage cylinders, which rekey quickly with standard pin kits. If you have something else - a Baldwin, a Yale keypad, or a no-name import - we’ll tell you whether a rekey is possible or whether the cylinder needs replacing. Either way, you’ll know the price before we touch a tool. Call (331) 310-8471 for a firm quote.
Yes, that’s standard work for us. We assess the existing keyway and cylinder type, then install new locks keyed into your current master system hierarchy. No existing key or badge stops working. Daniel Novak’s team has handled this for distribution and fulfillment facilities throughout the I-70 corridor, including after-hours jobs when a shift change is waiting. We quote a flat per-door price after a free site walk.
Usually yes, but the door prep matters more than the deadbolt. Newer Plainfield homes have one of two standard slab thicknesses, and many smart locks only fit one cleanly. We’ll check the cross-bore diameter, backset, and slab thickness, then tell you whether your existing deadbolt can be reused or needs replacing. Smart lock installation in Plainfield runs $175-$350 including hardware and programming. Call (331) 310-8471 and we’ll tell you what fits your door.
Rekey when you move in, when a key goes missing, after a relationship ends, or after anyone who had a key no longer needs one. Newer Plainfield subdivisions were often keyed alike by the builder, which means your neighbor’s key may have worked in your door at some point. If you’ve never rekeyed since buying, the most honest answer is: do it now. You’ll know the exact price before we schedule anything.
Yes. Frozen and seized cylinders on exterior commercial doors are a January and February constant in Plainfield, especially on loading docks and employee entrances that run 24/7. We answer the phone at 3 AM with a live dispatcher, and a tech from our Indianapolis office can reach most Plainfield commercial addresses within 30-45 minutes. The fix is usually a cylinder swap and rekey to the existing key. Call (331) 310-8471 and you’ll talk to a person, not a machine.
Call Novak Lock & Security for Lock Installation & Rekey in Plainfield
We got a call from a property manager at a warehouse off Ronald Reagan Parkway after a shift change at 2 AM: a frozen pin and tumbler lock cylinder on a roll-up door entrance had seized solid. Our tech used non-destructive entry to bypass the failed cylinder, then swapped in a new Schlage lock cylinder and rekeyed it to the existing master key system so every employee badge and key in the building kept working without a single replacement key. That’s the standard for every job in Plainfield, residential or commercial.
Call (331) 310-8471 now for a firm, written quote before anyone is dispatched. You get the price on the phone, the same price on the invoice, and a documented photo record when the job is done.
Written by Daniel Novak, Owner at Novak Lock & Security, serving Plainfield and surrounding communities since 2002.