Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Lock Installation & Rekey in Sandy Springs, GA: What It Costs and How It Works
Lock installation and rekeying in Sandy Springs typically runs $95-$185 per cylinder for rekeying and $180-$450 per lock for new installation, depending on hardware grade and whether the job involves high-security cylinders or smart lock integration. Most calls across the Perimeter Center corridor and the residential streets off Mount Vernon Road are completed the same day, often within a 60-90 minute window from dispatch. The price we quote on the phone is the price on the invoice. That rule has been in place at Lock Installation & Rekey since 2002, and it is written into Haven Standard Clause 1, with no exceptions for after-hours work or weekend calls.
Key Takeaways
- Rekeying in Sandy Springs runs $95-$185 per cylinder; full lock replacement runs $180-$450 per lock, quoted in writing before work starts.
- Same-day service is standard across Sandy Springs, including the Heards Ferry corridor, Perimeter Center, and gated communities along the Chattahoochee.
- Older Sandy Springs homes frequently need full deadbolt replacement, not just rekeying, because original builder-grade hardware from the 1980s and 1990s has corroded or seized.
- High-security keys from Medeco and Mul-T-Lock require factory authorization and specific documentation before duplication.
- Call (331) 310-8471 for a firm price. It is quoted before dispatch and does not change at the door.
Lock Installation and Rekey in Sandy Springs, Mapped to How People Actually Live Here
Sandy Springs sits at the junction of the Perimeter Center corporate corridor and metro Atlanta’s wealthiest residential base, so a single locksmith visit often shifts from rekeying a 1980s Mount Vernon Road deadbolt to coordinating a Medeco restricted-key plan for a mid-rise condo’s freight entrance in the same afternoon. That dual demand mix is largely absent in Doraville or Chamblee. A technician driving from Roswell Road to Glenridge Drive might start the morning in a 1979 custom home in the Heards Ferry corridor and end it inside a Perimeter Center high-rise’s elevator lobby, negotiating with a property manager about card-reader overrides. We plan for that range every day.
The residential stock in Sandy Springs is dominated by custom and semi-custom single-family homes built in the 1970s through 1990s. Those houses have heavy solid-core entry doors. They also have original builder-grade deadbolts that are now 30 to 50 years old. Summer humidity accelerates corrosion in aging brass cylinders on partially sheltered entryways throughout the older subdivisions, which means a request that sounds simple, “Can you rekey my front door?”, often becomes “Can you get the cylinder out without splitting the door?” We can, but it takes the right tools and the patience to work a seized pin and tumbler loose instead of forcing it.
Call (331) 310-8471 with a description of your door, your lock, and the problem. The dispatcher gives you a firm price before anyone is sent. No call-out surcharge is added on arrival. That is Haven Standard Clause 1: the price on the phone is the price on the invoice.
Why Sandy Springs Homeowners Use Novak Lock & Security
We rekeyed an original 1987 Schlage deadbolt on a heavy solid-core door in Heards Ferry, cutting new keys on-site because the old pin and tumbler had corroded into a near-seize from summer humidity. Two hours later our tech ran a non-destructive entry on a Perimeter Center condo unit where the lock cylinder had frozen after a January ice event, then patched the resident into the building’s existing master key system without drilling. That is the normal shape of a workday in Sandy Springs. Daniel Novak founded Novak Lock & Security on a rule that would stop the bait-and-switch pricing that gives this trade its worst reputation, and every technician on the roster works to that rule: written price first, documented record at the end.
Every visit includes a background-checked, uniformed technician and a documented photo record left with the customer at job completion. Not as a courtesy. As a procedure. Haven Standard requires it, and the same standard applies across all ten Haven brands. We have now installed or serviced more than 60,000 locks, keys, and systems, and every one of them started with a written price and ended with a record.
Our Lock Installation and Rekey Services in Sandy Springs
Smart Lock Installation
The most common smart lock call in Sandy Springs is a homeowner in a 1980s or 1990s subdivision near Mount Vernon Road who wants a keypad or app-controlled deadbolt on an existing solid-core door but is unsure whether the new hardware will fit the old bore. It usually will, but the strike plate and chisel work matter more than the lock body. A smart lock poorly seated against a 40-year-old frame will bind in humid weather. We install smart deadbolts, lever sets, and full handle sets, then verify the locking sequence with the door closed, not just mounted and assumed. Smart lock installation in Sandy Springs typically runs $220-$450 per door, including hardware.
Keyless Entry
Condominiums near Perimeter Center, especially mid-rise and high-rise buildings with shared corridors, ask us regularly about keyless entry for individual units that must remain compatible with building-wide systems. Keyless entry is not one product. It can mean a standalone keypad deadbolt, a card reader, or a fob-based system, and the wrong choice forces residents to carry two credentials instead of one. We match the entry hardware to what the property manager already runs, and when the board requires it, we supply a written scope before any part is ordered. Keyless entry hardware in Sandy Springs typically runs $180-$400 per opening.
Keypad Lock
Keypad locks on single-family homes along the Chattahoochee River corridor sit inside gated communities and HOAs, and a surprising number of those communities have open-safety audits. A keypad deadbolt is generally accepted in an audit when the cylinder is bump-resistant and the bolt has a hardened core. We see DIY installs where the keypad was mounted over a builder-grade latch, and the gate fails the next audit. We replace the latch with a bump-resistant deadbolt and set the keypad with separate codes per resident, which the HOA records for liability purposes. Keypad lock installation in Sandy Springs typically runs $160-$280 per door.
Biometric Lock
Biometric locks are the fastest-growing request in the high-end homes around Heards Ferry and the estates south of Riverside Drive. A fingerprint reader on a front door is convenient until the sensor gets wet, or until a family member’s skin is too dry in January to read consistently. We stock biometric hardware that pairs with a physical key override, and we tell every customer the same thing before they buy it: you still need a mechanical lock behind the sensor. Biometric hardware is not a replacement for a deadbolt. Installation in Sandy Springs typically runs $300-$600 per opening, including the cylinder and keyed override.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sandy Springs
We are factory-authorized for work on Medeco, Mul-T-Lock, Abloy, Baldwin, and Schlage, and we stock repair parts and common replacement cylinders for the hardware most often found in Sandy Springs homes. When a 1990s Baldwin mortise lock on Mount Vernon Road seizes after a January freeze, we do not tell you to replace it with a cheaper deadbolt. We rebuild the mortise body or install the same-grade Baldwin replacement, and we explain the difference between the two before you spend. The full security spectrum, from entry-grade to high-security, is priced in writing before anyone turns a cylinder.
Common Lock Installation and Rekey Problems We See in Sandy Springs Homes
- Corroded 1980s deadbolts in Heards Ferry and Mount Vernon Road homes. Summer humidity works its way into aging brass cylinders on partially sheltered entryways, and the pin and tumbler gradually seizes. What starts as a stiff key becomes a lock that will not turn at all.
- Frozen gate-entry keypads after winter ice events. The January 2014 and January 2022 freezes hit the GA-400 corridor hard, and gated community entrances along the Chattahoochee seized in clusters. We run non-destructive entry and replace the actuator wiring where ice has split it, without drilling the gate control box.
- No key control in Perimeter Center condo buildings. A condo board hands out duplicated keys without a controlled duplication record, and a single copied transponder key compromises every common door on the floor. We issue restricted keys with a written key control log, so every key is accounted for.
- Split door edges on HOA-owned doors after freeze damage. A resident tries to drill a seized lock, splits the door edge, and the HOA now owns a repair bill on top of the lock job. We open most frozen or seized cylinders without drilling, and when drilling is unavoidable, we protect the door edge before the bit touches it.
Pricing for Lock Installation and Rekey in Sandy Springs, GA
Rekeying a standard pin-and-tumbler cylinder in Sandy Springs runs $95-$185 per cylinder. That price includes the new keys and the labor. Full lock installation runs $180-$450 per lock, with the higher end covering Baldwin or Medeco hardware, mortise locks, and smart lock integration. High-security rekeying, such as Mul-T-Lock or Medeco cylinders, typically runs $165-$280 per cylinder because the restricted key blanks and the factory authorization add cost. Smart lock installation runs $220-$450 per door, including hardware. Every price is quoted on the phone before dispatch, and the technician is not permitted to change it on the doorstep. There is no call-out surcharge. Call (331) 310-8471 for a firm estimate, or bring us a competitor’s written quote and we will review it at no charge.
Serving Sandy Springs and the Cities Around It
Our coverage for Lock Installation & Rekey in Sandy Springs includes all of the city from the Perimeter Center district south to the Chattahoochee, and we regularly run calls to neighboring cities. We serve Atlanta, Roswell, Johns Creek, and Alpharetta with the same written-price rule and same-day response. Dispatch and scheduling are coordinated from our Atlanta office, and crews serve Sandy Springs locally. One firm price, quoted before the truck rolls, wherever you live in the corridor.
Serving Sandy Springs, GA - Our Local Coverage Area
We’re based in the Sandy Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Lock Installation and Rekey in Sandy Springs
Yes, in most cases we can rekey an older Schlage deadbolt by replacing the pins inside the cylinder and cutting new keys, without removing or replacing the lock body. If the cylinder has corroded from summer humidity, or if the housing is worn to the point where the new pins will not seat reliably, we will tell you that before any work starts and give you a firm replacement price. Call (331) 310-8471 and describe your lock; we can often tell you over the phone whether a rekey is enough.
Yes. We coordinate with property managers regularly on this exact job. A keyed override is installed alongside the existing card reader so you have a mechanical backup when the reader fails or the system is down, and we can key it into the building’s existing master system if the board has authorized it. We provide a written scope that states exactly what hardware will be added and how it interacts with the card system. Call (331) 310-8471 for a firm price before any work is scheduled.
Key control is a documented system that restricts who can duplicate a key and records every key made. A restricted key blank cannot be copied at a hardware store; it requires factory authorization and a documented request from the property owner or HOA board. Sandy Springs HOAs ask for it because a single copied key compromises every common door in a building, and without a control log, the board has no record of how many keys exist. We issue restricted keys with a written log for every property that requests it.
Yes. We use non-destructive entry on frozen gate keypads first, and we only drill into the control box when the lock cylinder itself is frozen beyond manipulation. The January ice events that hit the GA-400 corridor leave gate hardware seized and wiring split, and we are familiar with the actuator models used on Chattahoochee corridor gate entrances. Call (331) 310-8471 with the gate location and the symptom, and we will quote the job before dispatch.
Yes. Mul-T-Lock and Medeco keys are restricted, which means duplication requires proof of ownership and factory authorization. We are authorized for both brands and we cut restricted keys on-site with the documentation trail intact. A copy of a restricted key cannot be made at a storefront with a standard blank. Call (331) 310-8471 with the key card number and we will confirm your authorization and give you a per-key price before you come in.
Call Novak Lock & Security for a Firm Price in Sandy Springs
If you are in Sandy Springs and you need a lock installed, rekeyed, or repaired, call (331) 310-8471. A live person answers, day or night. We quote a firm price on the phone, send a background-checked, uniformed technician, and leave you with a documented photo record of the work. Every job is covered by the 365-Day Done Right Promise: if it is not done right, we make it right. That is the rule, and it has been the rule since 2002.
Written by Daniel Novak, Owner at Novak Lock & Security, serving Sandy Springs with written-price lock installation and rekey work under The Haven Standard.
Lock Installation & Rekey in Nearby Areas