Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Locksmith in Clovis, CA
Residential locksmith work in Clovis is shaped by a housing stock that was almost entirely built after 1990, when tract builders installed Kwikset and Schlage entry hardware by the pallet. Those locks are now 15 to 35 years old, and the San Joaquin Valley summer, with weeks of 105°F heat expanding steel frames and door slabs, has a way of finishing them off. Whether you need a deadbolt that actually throws or you’ve locked yourself out at midnight, call (331) 310-8471 and you’ll get a live person who gives you a firm price before a technician rolls.
Why Clovis Homes Are Different
Clovis sits where the valley floor meets the Sierra foothills, at the base of Highway 168, the main route to Shaver Lake and Huntington Lake. That geography matters to a locksmith because it means we work two very different populations in one city. There’s the dense suburban base, built out in master-planned tract subdivisions across the northeast growth corridor where builder-grade hardware is nearly universal, and there’s a large number of Clovis-area cabin and vacation property owners who need seasonal rekeying, post-winter lockouts, and emergency calls after mountain properties sit vacant for months and get targeted. That cabin-and-suburb combination simply doesn’t exist in neighboring Fresno.
On the residential side, most Clovis subdivisions were built between 1995 and 2015, and the entry locks installed then were entry-grade Kwikset and Schlage knobs and deadbolts. The HOA-gated communities used proprietary keypad and telephone-entry gate systems that are now reaching end-of-life together, creating clustered demand for full gate controller replacements and community-wide rekeying projects. In Old Town Clovis, the early- to mid-20th century commercial and residential buildings still carry period mortise and rim hardware that requires specialty work and parts you won’t find at a big-box store.
The climate is a service-call driver all by itself. In July and August, metal door frames and strike plates thermally expand enough that deadbolts bind, fail to fully throw, or trap keys in the cylinder. Prolonged UV exposure at valley temperatures also degrades keypad button covers and rubber gaskets on smart locks faster than you’d see in coastal California. Those two realities mean our Clovis dispatch calendar fills with seasonal deadbolt adjustments and electronic lock rebuilds that homeowners often mistake for “broken” hardware. Sometimes it is. Sometimes it’s the physics of steel in heat.
Our Main Clovis Services
Most calls to our Clovis line fall into two categories: planned lock and key work around a home sale, renovation, or tenant turnover, and unplanned lockouts and failures. Both get the same written price protocol, but the job shapes are different enough that each has its own dedicated Clovis page.
Lock Installation & Rekey in Clovis
When a Clovis homeowner closes on a house in a northeast tract subdivision, the first thing we recommend is a full rekey: every exterior lock reset to a new key, with all cylinders matched so one key works every door. We also replace builder-grade deadbolts with properly rated hardware, and we see a steady stream of HOA communities cycling out aging coded entry hardware. For a complete breakdown of rekey costs, lock grades, and what the job looks like in a Clovis home, see Lock Installation & Rekey in Clovis.
Emergency Locksmith in Clovis
A lockout on a July afternoon in Clovis is a different animal than one in a coastal city. You need someone who’ll answer the phone live, give you a firm price before dispatch, and send a background-checked, uniformed technician who arrives with a documented photo record of the job. We don’t charge a call-out surcharge on top of the quoted emergency price, and the price you get on the phone is the price on the invoice. That’s Emergency Locksmith in Clovis service, and it runs around the clock.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Residential Locksmith in Clovis
Residential locksmith work in Clovis is dominated by two realities: a housing stock overwhelmingly built after 1990 with builder-grade Kwikset and Schlage hardware, and a valley climate that, every summer, makes that hardware bind, seize, and sometimes fail outright. We replace worn cylinders, rekey entire homes after sale or turnover, install deadbolts that actually throw, and unfuck the occasional window lock that’s been painted shut for a decade. This is the core of our Residential Locksmith service, and in Clovis it gets called for most often when a door stops latching or a key stops turning.
Lock Change
Signs you need it
You’ve lost a key, had a tenant or roommate move out, or found that the existing lock is a builder-grade Kwikset knob that a flathead screwdriver could make short work of.
What it costs in Clovis
Lock changes in Clovis typically run $65-$95 per lock for the hardware and labor, depending on the grade of the new lock you choose.
How we do it
We remove the old hardware, inspect the door prep and strike alignment, install the new lock, and hand you new keys plus a written record of what was installed.
Residential Lockout
Signs you need it
You’re on the wrong side of a deadbolt and your key is on the kitchen counter, in the ignition, or somewhere in Shaver Lake.
What it costs in Clovis
Residential lockouts in Clovis run $75-$110, and that figure includes the full service: no call-out surcharge added when the technician arrives.
How we do it
We verify the property is yours, open the door without damaging the lock, and if the cylinder was drilled or forced, we replace it right then and document it.
Deadbolt Installation
Signs you need it
Your exterior doors still rely on a knob lock, or the existing deadbolt won’t fully throw because the strike plate has shifted with summer heat.
What it costs in Clovis
Deadbolt installation in Clovis runs $85-$150 per door, with the spread driven by whether we’re boring a new door or replacing hardware in existing prep.
How we do it
We address the strike-plate alignment that valley heat causes, install a properly rated deadbolt, and verify the bolt throws cleanly before we leave.
Lock Rekey
Signs you need it
You’ve bought a home in Clovis and you don’t know how many copies of the old key are floating around with previous owners, contractors, or a neighbor.
What it costs in Clovis
Rekeying in Clovis runs $18-$38 per cylinder, with all cylinders typically keyed to match so one key works the whole house.
How we do it
We open each cylinder, swap the pins to match a new key, test every door, and give you the full key count in writing.
Window Lock
Signs you need it
Ground-floor window latches are rusted, missing, or painted permanently open by a previous owner who never opened a window anyway.
What it costs in Clovis
Window lock replacement in Clovis runs $18-$38 per lock, with the price determined by the type of sash and hardware we’re working with.
How we do it
We remove the old hardware, source a matching or better replacement, install it, and confirm the window actually locks from both sides.
What Residential Locksmith Costs in Clovis
| Item | Typical range in Clovis |
|---|---|
| Lock change (per lock) | $65-$95 |
| Residential lockout | $75-$110 |
| Lock rekey (per cylinder) | $18-$38 |
| Deadbolt installation (per door) | $85-$150 |
| Window lock replacement (per lock) | $18-$38 |
How much does a locksmith cost for a house in Clovis?
A basic service call in Clovis runs $75-$110 for a lockout, $18-$38 per cylinder to rekey, and $65-$95 per lock to change hardware. You’ll have your exact number in writing on the phone, before anyone is dispatched.
Can you rekey multiple locks to the same key in Clovis?
Yes, and that’s the standard setup for Clovis homes built after 1990 where every exterior door carries the same Kwikset or Schlage design. We key all cylinders to match, so one key works every door. Call (331) 310-8471 for a firm quote.
Commercial Locksmith in Clovis
Commercial work in Clovis splits cleanly between Old Town storefronts with period mortise and rim hardware and the newer construction along Shaw Avenue and the 168 corridor. The Old Town buildings need specialty parts and a locksmith willing to file a strike plate by hand, while the newer commercial suites carry the same builder-grade cylinders as the tract homes next door. This is the scope of our Commercial Locksmith service, and in Clovis it’s increasingly driven by HOA gate systems reaching end-of-life and needing full controller replacements.
Commercial Lockout
Signs you need it
You’ve got a business to open, a staff waiting, and a deadbolt or storefront lock that won’t turn because valley heat has thrown the door out of alignment.
What it costs in Clovis
Commercial lockouts in Clovis run $85-$130, depending on the lock type, with the phone-quoted price holding unchanged at the door.
How we do it
We open the lock without destroying the door or the frame, get you inside, and then address the underlying alignment issue so it doesn’t re-freeze tomorrow.
Master Key System
Signs you need it
Your property manager, cleaning crew, and tenants each need different access levels, and right now you’re juggling a ring of keys that should have been retired years ago.
What it costs in Clovis
Master key systems start around $250 and run to $650+ depending on the number of doors and access levels, with a written schematic included.
How we do it
We pin every cylinder to a planned hierarchy, issue keys by access level, and leave you with a key control chart plus a documented record of every lock in the system.
High Security Locks
Signs you need it
You’re protecting inventory, cash handling, or sensitive records, and the existing Schlage cylinder can be bumped with a $5 tool from an online marketplace.
What it costs in Clovis
High-security cylinder upgrades in Clovis run $120-$450+, with factory-restricted key blanks available through Medeco and Mul-T-Lock systems.
How we do it
We survey the doors, specify high-security cylinders appropriate to the threat level, install them, and register the keyway so blanks cannot be duplicated without your authorization.
Panic Bar Installation
Signs you need it
Your occupant load requires a panic device on the exit door, but the existing hardware is a storeroom lock or a deadbolt that would fail a fire marshal inspection.
What it costs in Clovis
Panic bar installation in Clovis runs $350-$800 per door, hardware and labor included, with the written scope specifying exit-device make and grade.
How we do it
We verify fire and building code requirements for your occupancy type, install a listed exit device, and confirm the door releases with one hand on the push bar.
Access Control
Signs you need it
You need an audit trail of who entered which door and when, and the current setup is an aging telephone-entry keypad that residents have been calling about for a year.
What it costs in Clovis
Access control systems in Clovis range $600-$4,500+, with the spread set by door count, credential type, and whether we’re replacing an end-of-life HOA gate controller.
How we do it
We survey the doors and gate, define the credential and schedule parameters in writing, install the hardware and controller, and train your staff on the software.
What Commercial Locksmith Costs in Clovis
| Item | Typical range in Clovis |
|---|---|
| Commercial lockout | $85-$130 |
| Master key system | $250-$650+ |
| High security lock (per cylinder) | $120-$450+ |
| Panic bar installation (per door) | $350-$800 |
| Access control (per door) | $600-$4,500+ |
Do you do community-wide gate controller replacements in Clovis?
Yes, and it’s a recurring job type in the northeast Clovis HOA subdivisions where the 2000s-era keypad and telephone-entry gate systems are cycling out together. We scope the entire community, provide a per-door written price, and schedule the work in phases. Call (331) 310-8471 for a free survey of your gates.
How much does a master key system cost for a small Clovis office?
A small office with eight to twelve doors typically falls in the $250-$650 range. We provide a written schematic, key hierarchy, and a documented record of every cylinder before work begins.
Automotive Locksmith in Clovis
Automotive lock and key work in Clovis splits between the daily-driver suburbs on the valley floor and the recreational traffic moving up Highway 168 to Shaver and Huntington lakes. Car lockouts happen in the Home Depot parking lot on Herndon, in the Costco lot on Shaw, and at trailheads. This is our Automotive Locksmith service, and in Clovis it’s the transponder key and key fob work that’s grown fastest as the vehicle fleet modernizes.
Car Lockout
Signs you need it
You’ve locked the key in the car, the fob is dead, or the door lock cylinder has seized from years of valley dust and heat.
What it costs in Clovis
Car lockouts in Clovis run $60-$95, and that’s the complete price: no surcharge added when the technician gets to your parking lot.
How we do it
We open the vehicle without damaging the door, weatherstripping, or lock cylinder, then get you back inside and on your way.
Car Key Replacement
Signs you need it
You’re down to one key and you know the math on waiting until the key loss happens at the worst possible moment.
What it costs in Clovis
Car key replacement in Clovis runs $120-$300 for transponder keys and $35-$100 for basic keys, with the spread driven by chip programming.
How we do it
We cut the key, clone or program the transponder chip to your vehicle, and verify the key starts the car and turns every lock it should.
Transponder Key
Signs you need it
Your car is older than 2000, the key has a chip, and the replacement key you got from the hardware store won’t start the ignition even though it turns the door.
What it costs in Clovis
Transponder keys in Clovis run $120-$300, cut and programmed on-site, with the vehicle’s immobilizer reading the new chip before we call it done.
How we do it
We read the vehicle’s existing keys and immobilizer, cut the new key, program the transponder, and confirm the engine starts.
Key Fob Programming
Signs you need it
You bought a used car with one fob, or the existing fob’s buttons have degraded from UV exposure and the remote only works when it’s inside the car.
What it costs in Clovis
Key fob programming in Clovis runs $60-$120 on top of the fob itself, whether it’s a replacement we supply or a fob you’ve brought.
How we do it
We wire into the vehicle’s OBD port, register the fob to the car’s receiver, and test every button before we hand it back to you.
Ignition Repair
Signs you need it
The key won’t turn, the cylinder is worn smooth, or the ignition won’t release the steering lock even after you’ve given the wheel a wiggle.
What it costs in Clovis
Ignition repair in Clovis runs $180-$350, priced after we determine whether the cylinder can be rebuilt or needs replacement.
How we do it
We extract any stuck key, inspect the cylinder and switch, rebuild or replace the ignition, and confirm the vehicle starts and the steering lock releases.
What Automotive Locksmith Costs in Clovis
| Item | Typical range in Clovis |
|---|---|
| Car lockout | $60-$95 |
| Basic car key replacement | $35-$100 |
| Transponder key | $120-$300 |
| Key fob programming | $60-$120 |
| Ignition repair | $180-$350 |
What does a car locksmith cost in Clovis?
A car lockout in Clovis runs $60-$95, a basic key replacement $35-$100, and a transponder key or fob programming job falls in the $120-$300 range, all quoted in writing before a technician is dispatched. Call (331) 310-8471 for your exact price.
Can you program a key fob in Clovis on-site?
Yes, and we don’t require you to tow the car to a shop. Mob programming runs $60-$120 plus the fob, and we confirm every button works before we leave your driveway. Call (331) 310-8471 for a firm quote on your vehicle.
Brands We Service in Clovis
We stock and service the brands Clovis properties already have: Schlage and Kwikset for tract-home entry sets, plus factory-authorized work on Medeco, Mul-T-Lock, Baldwin, Abloy, and Sargent for commercial and high-security jobs. If one brand reads like a better fit for your property than what’s on the door now, we’ll price the swap in writing before we touch a cylinder. See our brands for the full manufacturer list and our authorization scope.
Pricing for Locksmith in Clovis, CA
| Service | Typical range in Clovis |
|---|---|
| Residential lockout | $75-$110 |
| Lock change (per lock) | $65-$95 |
| Lock rekey (per cylinder) | $18-$38 |
| Deadbolt installation (per door) | $85-$150 |
| Window lock replacement (per lock) | $18-$38 |
| Commercial lockout | $85-$130 |
| Panic bar installation (per door) | $350-$800 |
| High security lock (per cylinder) | $120-$450+ |
| Car lockout | $60-$95 |
| Transponder key | $120-$300 |
| Key fob programming | $60-$120 |
Prices in Clovis move upward when a job involves Old Town mortise or rim hardware that needs specialty parts, when an HOA gate system requires a whole-community controller replacement, or when a valley summer has thrown a door or frame so far out of alignment that the work exceeds a standard service call. None of that is a surprise: the dispatcher quotes a firm price on the phone, and the price on the phone is the price on the invoice. That’s Haven Standard Clause 1, and it’s been our operating rule since 2002.
Neighborhoods We Serve in Clovis
We cover the full Clovis footprint, from the tract subdivisions east of Clovis Avenue to the Old Town storefronts and the new commercial strips on Shaw. Most residential calls in the northeast growth corridor get a technician out within 30 to 45 minutes.
- Tarpey Village
- Old Town Clovis
- Harlan Ranch
- Dry Creek
- Wawona Park
Service Area - Cities Near Clovis
We handle Clovis jobs daily and run calls into the surrounding cities on a scheduled dispatch. For service in the metro core, see our Fresno, CA page. We also work regularly in Madera, CA to the northwest, and for mountain-adjacent and Central Coast clients we serve Morgan Hill, CA and Tracy, CA. Dispatch and scheduling for all of these runs from our Central Valley office.
Serving Clovis, CA - Our Local Coverage Area
We’re based in the Clovis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Locksmith in Clovis
Most residential calls in Clovis get a technician out within 30 to 45 minutes. Emergency lockouts are prioritized, and mountain cabin calls up Highway 168 are scheduled with the drive time factored in before we quote the price. You’ll have a dispatch window on the phone, not after the fact.
For your own dwelling’s entry locks, no. For gate controllers, common-area doors, or any hardware governed by your HOA’s architectural committee, the community may need to approve the scope before we work. We’re used to those boards in northeast Clovis and can provide written specs for review.
Yes. The dispatcher quotes a firm price before a technician is dispatched, and the technician is not permitted to change that figure at the door. No call-out surcharge, no “the lock is harder than we thought” adjustment. That rule has been in place since 2002.
Call (331) 310-8471 and a live person answers, day or night, with a firm written price before we send a technician to your Clovis address.
What happens when you call
- 1A real person answersNo phone trees - talk to a local locksmith pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Clovis Customers Say
"Quoted forty-five on the phone, paid forty-five at the door. I had been burned by a company that quoted nineteen and then wanted three hundred."
- Theresa Q."Rekeyed the whole house after we bought it. He showed me the old pins and explained how many keys had likely been cut over the years."
- Omar J."Honest. Told me the existing deadbolt was good quality and only needed the strike plate reinforcing."
- Sal V.