Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Trusted Commercial Locksmith for New York City Homeowners
Commercial locksmith service in New York City covers everything from rekeying an office after an employee leaves to installing a full access control system across a building. Most jobs are completed same day, with a firm price quoted before a technician is dispatched. We’ve handled over 60,000 locks, keys, and systems since 2002, and every job ends with a documented photo record. If you manage a building, run a storefront, or own a medical practice in Manhattan, Brooklyn, Queens, or The Bronx, call (331) 310-8471 for a written quote before anyone gets in the van - or reach our Commercial Locksmith - South Gate for service there.
What Our Commercial Locksmith Service Includes
Commercial Lockout
A commercial lockout in New York City means your storefront isn’t opening at 8 a.m. or your office staff is standing in the hallway. We respond around the clock, from the Financial District to Long Island City, and we open most commercial doors, files, and cabinets without replacing the lock. Because Clause 1 of The Haven Standard applies here too, you’ll get a firm price before we arrive, and that price does not change when the technician shows up. The photo record we leave with you documents the entry and any hardware touched.
Master Key System
A master key system gives a building owner or office manager one key that opens everything, while employees carry keys that only open what they need. We design and cut these systems for buildings across New York City, including retrofit jobs where the existing cylinders are a mix of Schlage, Yale, and Kwikset. Novak Lock & Security has built master key systems for medical offices, schools, and commercial buildings where access must be strictly tiered. Every master key chart we produce comes with a written record so future additions to the system don’t require starting from zero.
High Security Locks
High security locks in New York City are a practical necessity for businesses in mixed-use buildings where foot traffic is constant. We install Medeco and Mul-T-Lock cylinders that resist picking, drilling, and unauthorized key duplication. These locks require controlled key blanks, which means nobody can walk into a hardware store and copy a key. Daniel Novak and the team at Novak Lock & Security are factory-authorized, and we’ll price the upgrade in writing before turning a single cylinder.
Panic Bar Installation
Panic bars, or crash bars, are required by New York City building code on many commercial exit doors. We install and service panic hardware including Von Duprin and Falcon units, and we know the local inspection requirements for fire-rated doors. A broken or stiff panic bar is not something to leave for next month; it’s a fire code violation in most commercial occupancies. We’ll inspect the bar, confirm the door swings properly, and leave a written record of the hardware condition.
Access Control
Access control in New York City ranges from a single keypad on one door to a building-wide system of card readers, electric locks, and software that tracks who went where and when. We start with a written scope that names every component and every per-door price, so you know the total before we order anything. We’ve installed everything from simple standalone keypads to multi-tenant systems covering common areas, offices, and server rooms. The work is surveyed and scheduled, then installed by a background-checked technician.
File Cabinet Lock
File cabinet locks are small hardware with patient records, client files, or tax documents behind them. We replace, rekey, and open file cabinets across New York City offices without damaging the drawer or frame. Most jobs are handled in under an hour, and the price is quoted per lock before we start. If you have ten cabinets, we’ll quote all ten in one written scope.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Commercial Locksmith
We work with the full range of commercial lock hardware, from entry-grade to high-security. Medeco is a brand we have factory authorization for, which matters when you need restricted keys or a cylinder that can’t be duplicated at a kiosk. We stock OEM pins and followers for Medeco and Mul-T-Lock, and we see a lot of both in New York City commercial buildings.
Yale and Baldwin commercial hardware shows up in older buildings throughout Manhattan and Brooklyn, often on doors that have been in service for forty years. We service those units with original parts where possible and documented notes when replacement is the honest recommendation. Whether you have Medeco, Mul-T-Lock, Yale, Baldwin, or any other make, we can service it and price the work in writing before we begin.
Signs You Need Commercial Locksmith Right Now
- A key broke off in a commercial lock. This happens more often in freezing New York City winters when brass keys turn brittle. The broken piece needs to be extracted before it damages the cylinder or jams the door permanently.
- An employee left and didn’t return their keys. Any time a former employee had access to your space, rekeying is the correct move. We can rekey the affected cylinders and issue new keys the same day.
- Your storefront door sticks or won’t latch. A commercial door that doesn’t latch is a liability and an open invitation. Often it’s the strike plate, but sometimes the lock body itself is worn past adjustment.
- Multiple people are sharing unlabeled keys. When keys float around without records, you have a security gap. A master key system or a simple rekey with controlled key counts fixes it quickly.
- Your panic bar is stiff or flagged during an inspection. Fire code enforcement in New York City is active. If your panic hardware failed an inspection or feels hard to press, call a commercial locksmith before the follow-up inspection.
Our Commercial Locksmith Process - Step by Step
- 1
Call and get a firm quote. You talk to a live person, 24/7, who asks the right questions about your door, lock type, and what you need. You get a written quote before a technician is dispatched. Clause 1 of The Haven Standard: the price on the phone is the price on the invoice.
- 2
Technician arrives on schedule. A background-checked, uniformed technician from Novak Lock & Security shows up with the parts and tools for your job. For emergencies, we move as fast as New York City traffic allows, and we’ll give you an honest arrival window.
- 3
Diagnosis and written scope. The technician inspects the hardware, names the parts, and confirms the scope in writing. If the situation differs from what was described on the phone, we stop and re-quote before touching anything. You approve the price before any work proceeds.
- 4
Work done, documented. We replace, rekey, or install, then test everything through several cycles. The technician takes photos of the completed work and leaves you with a written record of what was done, what parts were used, and the condition of the surrounding hardware.
- 5
Warranty and follow-up. Every job is covered by the 365-Day Done Right Promise: if it’s not done right, we make it right. You get the documentation, and we keep records on file so future service calls start with a full history.
How Much Does Commercial Locksmith Cost in New York City?
A typical commercial lockout in New York City runs $120-$250, depending on the lock type and time of day. Rekeying a commercial lock runs $25-$45 per cylinder, and most office doors can be rekeyed in under an hour. A panic bar installation typically runs $450-$900 including hardware, depending on the door width and fire rating. Access control systems start around $800 for a single door keypad and go up from there based on the number of doors and software features. Master key systems are priced per cylinder with a one-time design fee, typically $300-$700 for small to mid-size commercial buildings.
What affects the price is the hardware grade, the number of cylinders, whether the door is fire-rated, and whether you want restricted keyways. The way to avoid overpaying is to get the whole scope in writing before work starts and to decline any technician who refuses to quote until they’re on site. Every Novak Lock & Security estimate includes the full price, the labor, and the hardware, with no call-out surcharge added on arrival. Call (331) 310-8471 for an exact quote, and if you bring us a competitor’s written estimate, we’ll review it at no charge.
Commercial Locksmith Near New York City - Our Service Area
Novak Lock & Security serves all five boroughs: Manhattan, Brooklyn, Queens, The Bronx, and Staten Island. Most commercial jobs in midtown Manhattan or downtown Brooklyn are reached within 60-90 minutes, and emergency lockouts are prioritized around the clock. If you manage a property in New York City and you’re looking for a Commercial Locksmith in New York City, call us. We also maintain service teams for Commercial Locksmith in Los Angeles and Commercial Locksmith in Chicago for multi-city property portfolios, and our main home page has the full scope of services.
Serving New York City, NY - Our Local Coverage Area
We’re based in the New York City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Commercial Locksmith in New York City
A commercial locksmith is a locksmith who works on business properties: storefronts, offices, warehouses, schools, and medical facilities. The work includes lock installation, rekeying, master key systems, panic bars, access control, and lockout response. Commercial locksmiths differ from residential locksmiths because they deal with higher-grade hardware, fire code requirements, and key control systems - the same expertise you’ll find with our Commercial Locksmith in Los Angeles. Novak Lock & Security has handled commercial locksmith work in New York City since 2002, with a documented record on every job.
A simple rekey or lockout usually takes 30-60 minutes on site. Panic bar installation or access control setup can take several hours, depending on the number of doors and the wiring involved. We give you a time estimate when you call, and we keep you informed if the diagnosis reveals something unexpected. Every job is finished and documented before the technician leaves.
Most commercial locksmith jobs in New York City fall between $120 and $900, depending on whether it’s a lockout, a rekey, or a hardware installation. We provide an exact written quote before any technician is dispatched, and that price is protected by The Haven Standard Clause 1: the price on the phone is the price on the invoice. Call (331) 310-8471 for a free, no-obligation estimate.
Yes. We are factory-authorized for Medeco and Mul-T-Lock, which means we can cut keys, rekey cylinders, and order original parts. We also service Yale and Baldwin commercial hardware. If you have a brand we haven’t mentioned, ask when you call; we work on most commercial lock hardware in service in New York City today.
Yes. Our phones are answered by a live person 24/7, and emergency commercial lockouts are dispatched immediately. We serve all five boroughs of New York City, and we carry the tools to open most commercial doors, file cabinets, and desk locks without destructive entry. The price is quoted on the phone before we leave, and it’s the same price when we arrive.
Every job is covered by the 365-Day Done Right Promise. If the work is not done right within a year, we make it right at no charge. That covers installation, rekeying, and hardware we supply. The warranty is documented in writing as part of the record we leave with you.
Have the property address, a description of the door and lock, and any photos of the hardware ready when you call. If it’s an existing system, have the key counts and any access control software details handy. You don’t need to empty the area or do any dismantling; our technician handles everything, documents the work, and leaves the site clean.
Schedule Your Commercial Locksmith Service in New York City Today
Call Novak Lock & Security at (331) 310-8471 for a written quote on your commercial locksmith job, or contact our Commercial Locksmith in Bell for local service there. A live person answers around the clock, quotes you a firm price, and dispatches a background-checked, uniformed technician. No call-out surcharge, no bait pricing, no pressure. That’s The Haven Standard since 2002.
Written by Daniel Novak, Owner at Novak Lock & Security, serving New York City since 2002.