Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Locksmith in Franklin, TN
Residential locksmith work in Franklin, TN runs about $65-$180 for a standard service call, with most homeowners paying between $95 and $145 for a rekey or deadbolt adjustment. What makes Franklin different is the housing stock: 19th-century mortise locks in the historic district and 4,000-square-foot smart-lock-ready homes in Westhaven require two very different skill sets. Call (331) 310-8471 for a written price before anyone rolls a truck.
Why Franklin Homes Are Different
Franklin’s housing splits into two worlds. The historic downtown district holds Victorian and Federal-style homes from the 1800s, and many still carry their original mortise boxes: cast-iron lock bodies that sit inside a door pocket, not on the surface. Working on those takes a bench saw, a feel for hand-cut parts, and patience you don’t need on a new build. Then there’s the post-2000 wave across Avalon, Ladd Park, and Westhaven, where six keyed exterior doors are common and half the hardware is smart-lock or multi-point.
The humid subtropical climate does its own work. Summer swelling pushes wooden door jambs and binds deadbolt throws on the craftsman and colonial doors all over town, so a lockout call often turns into a strike-plate adjustment job. Winter ice storms freeze exposed pin-tumbler cylinders on detached garages and outbuildings, which are common on the larger lots south of Mack Hatcher. And in Westhaven specifically, HOA guidelines often specify Venetian Bronze or Antique Brass exterior hardware to match approved door colors. We confirm the finish code before we leave the shop for a call in that area.
Our Main Franklin Services
Most Franklin homeowners reach out for one of two reasons: new keys on a just-purchased home, or a lock that won’t turn at the worst possible moment. Both jobs are fully documented and priced in writing.
Lock Installation & Rekey in Franklin
Franklin’s relocation market means a high volume of rekey work for buyers who just closed on a home and want keys that match only their family. The job involves re-pinning existing cylinders or installing new hardware on every keyed exterior door, and in Franklin that often means six or more entry points. Historic homes add a layer: original mortise locks need cylinder work, not just a Kwikset swap. You can read the full breakdown on our Lock Installation & Rekey in Franklin page.
Emergency Locksmith in Franklin
A lockout in Franklin rarely waits for business hours. Homeowners locked out of a detached garage on a cold February night, or a family returning from downtown and finding the deadbolt seized, need a live answer now. Our dispatchers answer around the clock and quote a firm price before anyone is sent. Full details are on the Emergency Locksmith in Franklin page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Residential Locksmith in Franklin
Residential locksmith work in Franklin means re-pinning, replacing, and repairing locks on homes that range from 1860s brick Federals to 2024 builds with Z-wave deadbolts. Summer humidity swells the wooden door frames all over town and binds deadbolts, so what starts as a “lock won’t turn” call often becomes a strike-plate adjustment in the same visit. Novak Lock & Security started doing this work at the Residential Locksmith level, and we still quote every residential job in writing before anyone gets in a van.
Lock Rekey
Signs you need it
You just moved into a home in Franklin and can’t verify who still has a copy of the old key.
What it costs in Franklin
Rekeying the typical six-cylinder Franklin home runs $85-$180 depending on cylinder count and lock grade.
How we do it
We remove each cylinder, re-pin it to a new key, and confirm every lock on the property works from the same cut before we leave.
Deadbolt Installation
Signs you need it
Your exterior doors rely on knob locks alone, or the existing deadbolt throws less than one full inch into the strike.
What it costs in Franklin
A single Grade 1 deadbolt install in Franklin typically runs $95-$220 including the hardware and reinforced strike.
How we do it
We bore the door, set the bolt, install the strike with 3-inch screws into the frame, and photograph the final condition for your record.
Residential Lockout
Signs you need it
You’re standing outside a locked Franklin home with no working key and no safe way to get back in.
What it costs in Franklin
Residential lockout service in Franklin runs $65-$150 depending on time of day and lock type, quoted before dispatch.
How we do it
We arrive, verify you have a right to be there, open the lock with non-destructive picks where possible, and document the visit with photos.
What Residential Locksmith Costs in Franklin
| Item | Typical range in Franklin |
|---|---|
| Service call and diagnosis | $65-$95 |
| Lock rekey (per cylinder) | $15-$30 |
| Deadbolt installation | $95-$220 |
| Residential lockout | $65-$150 |
How long does a rekey take in Franklin?
A standard six-cylinder rekey in Franklin takes 45-90 minutes on site, longer on historic homes with mortise locks. We quote the price before we start and that price is the price on the invoice.
Can you rekey a mortise lock in a historic Franklin home?
Yes, we handle original mortise cylinders in Franklin’s downtown district. The work is done on site with the lock removed, re-pinned, and reinstalled, and we carry replacement mortise parts in the van.
Commercial Locksmith in Franklin
Commercial locksmith work in Franklin concentrates along Cool Springs Boulevard and Carothers Parkway, where office suites and mixed-use buildings need master keying, high-security cylinders, and panic hardware that clears fire code. Corporate relocations keep this corridor busy, and a tenant turnover means rekeying suites that can’t be idle while a lock is re-pinned. Every commercial job we take gets a written scope and a documented photo record when we finish, as described on our Commercial Locksmith service page.
Master Key System
Signs you need it
Your Franklin office building has multiple suites needing different key access levels while management needs a single master key.
What it costs in Franklin
Master key systems in Franklin start at $25 per cylinder and run upward depending on cylinder count and security grade.
How we do it
We build the pin chart, cut and assign keys, then install cylinders with the levels you specify, testing every key against every lock before we hand anything over.
High Security Locks
Signs you need it
Your Franklin business holds sensitive inventory, cash, or client data and standard commercial locks can be bumped or picked.
What it costs in Franklin
High-security cylinders in Franklin typically run $55-$110 per cylinder, with some Medeco or Mul-T-Lock builds priced by quote.
How we do it
We install restricted keyway locks whose keys cannot be copied at a hardware store, and we register each key in a controlled system so duplicates only come from us.
What Commercial Locksmith Costs in Franklin
| Item | Typical range in Franklin |
|---|---|
| Commercial lockout | $95-$195 |
| Master key system (per cylinder) | $25-$45 |
| High security cylinder (per cylinder) | $55-$110 |
| Panic bar installation | $350-$900 |
Do you handle access control for Franklin offices?
Yes, we install and service electronic access control for offices around Franklin, including readers, credentials, and door controllers. The job starts with a written scope and ends with a photo record.
Can you rekey a Franklin office without interrupting business?
Almost always. For most suite rekeys in Franklin, we work during off hours or rotate through one door at a time so the business stays open. Timing is confirmed in the written scope.
Automotive Locksmith in Franklin
Automotive locksmith work in Franklin splits between the predictable and the urgent: a key fob that stopped talking to a Subaru in a Westhaven driveway, or a car keyed shut outside a Cool Springs office park. The newer the vehicle, the more likely the key carries a transponder chip, and Franklin’s current fleet of late-model SUVs and electric vehicles means we program far more than we cut. The work is covered on our full Automotive Locksmith page, but the short version is this: we come to you, we test everything, and we hand you a working key before we leave.
Car Lockout
Signs you need it
Your keys are locked in the car and you’re parked somewhere in Franklin with no spare within reach.
What it costs in Franklin
Car lockout service in Franklin runs $60-$140, and we can usually be on scene within 30-45 minutes.
How we do it
We open the door with non-destructive long-reach or wedge tools, verify you own or are authorized to access the vehicle, and hand you your keys.
Transponder Key
Signs you need it
Your car cranks but won’t start, or the security light flashes, meaning the key’s chip isn’t being read.
What it costs in Franklin
Transponder key cutting and programming in Franklin runs $125-$225 depending on the vehicle and chip type.
How we do it
We cut the key to your ignition, program the chip to your car’s immobilizer with our on-board programmer, and start the car in front of you before we call the job done.
What Automotive Locksmith Costs in Franklin
| Item | Typical range in Franklin |
|---|---|
| Car lockout | $60-$140 |
| Car key replacement | $85-$185 |
| Transponder key | $125-$225 |
| Key fob programming | $85-$180 |
Can you cut a car key without the original?
Yes, we cut replacement car keys in Franklin from the ignition or door lock code even when no original key exists. It takes longer and costs more, but it’s routine work.
Do you work on European cars in Franklin?
Yes, we cut and program keys for European makes common in Franklin including BMW, Mercedes, and Audi. Some models require dealer-linked coding, and we’ll tell you upfront if that applies before you pay anything.
Brands We Service in Franklin
We carry and service hardware from our brands including Medeco, Yale, Baldwin, and Mul-T-Lock. Stock is refreshed weekly from our metro supply network, so most common Franklin installation and replacement parts are in the van same-day.
Pricing for Locksmith in Franklin, TN
| Service | Typical range in Franklin |
|---|---|
| Residential service call | $65-$95 |
| Lock rekey (per cylinder) | $15-$30 |
| Deadbolt installation | $95-$220 |
| Residential lockout | $65-$150 |
| Commercial lockout | $95-$195 |
| Master key system (per cylinder) | $25-$45 |
| High security cylinder (per cylinder) | $55-$110 |
| Panic bar installation | $350-$900 |
| Car lockout | $60-$140 |
| Transponder key | $125-$225 |
What pushes Franklin prices up is hardware grade and cylinder count, not mystery surcharges: a six-door smart-lock retrofit costs more than a single-cylinder rekey because there are six locks to work through. The dispatcher quotes a firm price, and the technician is not permitted to change it at the door. It has worked that way since 2002, and it’s written into Haven Standard Clause 1.
Neighborhoods We Serve in Franklin
We run calls all over Franklin, from the historic streets near Five Points to the newer subdivisions south of the Mack Hatcher loop. Response time varies by time of day and how far you are from the Cool Springs corridor, but most residential calls are reached within 45 minutes.
- Westhaven
- Historic Downtown Franklin
- Cool Springs
- Avalon
- Ladd Park
Service Area - Cities Near Franklin
Beyond Franklin itself, our technicians serve Brentwood, TN, Spring Hill, TN, Nashville, TN, and La Vergne, TN. Scheduling and dispatch for these runs are coordinated from our Memphis office, but the crews live and work in the metro area, so a Franklin call never waits on a truck from out of state.
Serving Franklin, TN - Our Local Coverage Area
We’re based in the Franklin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Locksmith in Franklin
Most Franklin lockouts are reached within 30-45 minutes, longer during rush hour along Cool Springs Boulevard or I-65. The dispatcher gives you a live estimate when you call and a firm price before anyone leaves the shop.
Not for the lock mechanism itself, but several Franklin communities, including Westhaven, have architectural guidelines covering exterior hardware finish. We confirm your HOA’s finish requirement before we bring a replacement deadbolt, so you don’t receive a compliance notice afterward.
Yes. Haven Standard Clause 1 prohibits any technician from changing the quoted price at the doorstep. The price on the phone is the price on the invoice, and that rule has been in place since Daniel Novak founded the company in 2002.
For a firm, written price on any locksmith job in Franklin, call (331) 310-8471. A live person answers, every hour of every day.
What happens when you call
- 1A real person answersNo phone trees - talk to a local locksmith pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Franklin Customers Say
"Honest. Told me the existing deadbolt was good quality and only needed the strike plate reinforcing."
- Sal V."Fast, polite, and carried identification without being asked. Would use again."
- Grant W."Locked out at eleven at night. A person answered, gave me a time and a name, and both were right."
- Franklin D.