Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Locksmith in Georgetown, TX
Residential locksmith work in Georgetown, TX splits into two very different jobs: rekeying the builder-grade Kwikset and Schlage hardware in Sun City’s 10,000-plus Del Webb homes, and reworking the old mortise locks and non-standard keyways on downtown’s late-1800s limestone storefronts and houses. Between them sits a broad band of 2000s-era tract homes in Wolf Ranch and Teravista where move-in rekeys are the standard first call. Call (331) 310-8471 and you’ll get a firm price before anyone is dispatched.
Why Georgetown Homes Are Different
Georgetown’s housing stock spans roughly 130 years, and that spread dictates which locksmith tools and methods come off the van. Downtown and Old Town are dominated by original mortise locks with threaded spindles and skeleton-key keyways, several of which have been in continuous service since the early 1900s. Repairing these requires deadbolt and mortise-lock retrofits, not the quick cylinder swaps that work on modern bored locks. Sun City Georgetown, the Del Webb 55-plus community that stretches across Williams Drive, is the opposite problem: over 10,000 homes built in waves from the late 1990s through the 2010s, nearly all with original builder-grade deadbolts now 15 to 25 years old. Worn tumblers and stiff cylinders are the norm there, and lockouts are frequent enough that Sun City alone can anchor a Georgetown locksmith route.
Then there’s the soil. Georgetown sits on Central Texas shrink-swell Vertisol clay, the black gumbo that expands after rain and contracts in drought. The movement shifts slab foundations and door frames enough to pull deadbolts out of alignment with their strike plates, so a lock that worked in May may bind by August. We carry strike plate adjustment hardware on every Georgetown call because we know the soil here moves seasonally, not incidentally.
Our Main Georgetown Services
Two services account for most of what Georgetown homeowners call us about: planned lock work and emergencies. Each has its own dedicated page with full local detail.
Lock Installation & Rekey in Georgetown
Move-in rekeys, deadbolt upgrades, and full lock changes across Georgetown’s mix of Sun City builder homes, Wolf Ranch tract houses, and old downtown mortise-lock buildings. The job varies by era: a 2015 tract home rekeys in under an hour, while a 1905 downtown property may need cylinder retrofits and custom keying work. We stock the common Kwikset, Schlage, and Baldwin parts locally, and high-security cylinders are quoted in writing before any work starts. Full details on pricing and process live on our dedicated page: Lock Installation & Rekey in Georgetown.

Emergency Locksmith in Georgetown
Lockouts happen on the hottest afternoons and the coldest nights, and Georgetown’s older Sun City residents call at a higher rate than any other neighborhood we serve in the metro. We answer the phone with a live person at 2 a.m., quote a firm price on the spot, and dispatch a background-checked technician in a marked van. No call-out surcharge is added at the door, and the price quoted by the dispatcher is the price on the invoice. See Emergency Locksmith in Georgetown for response expectations and emergency pricing.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Residential Locksmith in Georgetown

Residential lock work in Georgetown means working across three distinct housing stocks: the 10,000-plus homes of Sun City with their aging builder-grade Kwikset deadbolts, the 2000s-era tract homes in Wolf Ranch and Teravista where move-in rekeys are the standard first call, and the historic limestone houses around the downtown square with old mortise locks and non-standard keyways. We cover the full Residential Locksmith range, and every job starts with a written price. On a typical Georgetown rekey, homeowners want every exterior lock keyed alike, and we do that in about an hour on modern homes, longer on older ones where cylinders were replaced piecemeal over decades.
Lock Change
Signs you need it
You have a key you can’t account for, a recent tenant or contractor departure, or a deadbolt that turns but no longer throws the bolt cleanly.
What it costs in Georgetown
A standard deadbolt or knob swap in Georgetown typically runs $85-$150 per lock, with high-security cylinders (locks that cannot be picked or bumped by standard tools) adding $150-$300 per cylinder in labor, quoted in writing before we start.
How we do it
We assess the door prep, replace the lock body and cylinder to match the existing bore, test the throw into the strike plate, and document the finished work with a photo record left with you before we leave.
Lock Rekey
Signs you need it
You’ve moved into a new home, a key has gone missing, or multiple doors use different keys and you want one key for all exterior locks.
What it costs in Georgetown
Rekeying in Georgetown runs $75-$125 for the first lock and $20-$35 per additional cylinder on the same key, with the full price set on the phone before dispatch.
How we do it
We remove each cylinder, replace the internal pins to match a new key, reinstall the lock, and test every key in every lock before calling the job done.
Deadbolt Installation
Signs you need it
Your exterior doors rely on knob locks alone, or the existing deadbolt is a builder-grade single-cylinder that no longer aligns with the strike plate after Georgetown’s clay soils shifted the door frame.
What it costs in Georgetown
Deadbolt installation in Georgetown typically runs $95-$180 per deadbolt, including standard hardware and the labor to bore or enlarge the door prep if needed.
How we do it
We bore the door to spec if needed, install the deadbolt so the bolt throws fully into the frame, adjust the strike plate height and depth, and hand you the keys with the old hardware bagged for disposal.
What Residential Locksmith Costs in Georgetown
| Item | Typical range in Georgetown |
|---|---|
| Rekey, first lock | $75-$125 |
| Additional cylinders (same key) | $20-$35 each |
| Lock change (standard) | $85-$150 per lock |
| Deadbolt installation | $95-$180 per lock |
How fast can you get to a residential job in Georgetown?
Most residential jobs in Georgetown are reached the same day. Emergency lockouts are typically dispatched within the hour, and scheduled rekeys or installs get a firm time window when you call.
Call (331) 310-8471 for the exact price on your lock work. The quote you get on the phone is the full price.
Do Sun City homes need different locks than other Georgetown homes?
Mostly the original Kwikset deadbolts are simply worn after 15 to 25 years. Sun City residents call us more often for lockouts and stiff cylinders, and many choose to upgrade to Schlage or high-security cylinders rather than rekey aging hardware. The work itself is the same, the volume is just higher there.
Commercial Locksmith in Georgetown

Commercial locksmith work in Georgetown concentrates downtown, where the limestone storefronts around the square hold original mortise locks, and along Williams Drive and I-35, where offices, medical suites, and retail strips use modern cylindrical hardware and electronic access control. Georgetown’s commercial properties see a steady flow of master key requests, panic bar replacements, and after-hours lockouts from the restaurant and retail rows. We handle the full commercial scope, documented and priced in writing under The Haven Standard. For the complete service line, see our Commercial Locksmith hub page.
Commercial Lockout
Signs you need it
A key breaks off in a storefront lock, a closing shift loses the only copy, or an employee changes roles and the old key no longer turns.
What it costs in Georgetown
Commercial lockouts in Georgetown run $75-$150 for standard storefront entry during business hours, plus mileage if outside our usual Georgetown route, with after-hours calls priced the same but dispatched on the emergency schedule.
How we do it
We verify authorization before opening, pick or bypass the lock without damaging the door, then make a new key and leave you a written record of the entry.
Master Key System
Signs you need it
Managers, cleaning crews, and individual tenants each need different access levels, and you’ve been juggling a ring of il-matched keys instead of one per level.
What it costs in Georgetown
A master key system in Georgetown is designed and quoted as a flat project, typically $40-$75 per cylinder conversion plus hardware, with the full scope and price written before any pinning starts.
How we do it
We map every door and keyholder, assign levels, pin each cylinder to its level, and deliver the keys with a written keying schedule kept on file for future expansion.
What Commercial Locksmith Costs in Georgetown
| Item | Typical range in Georgetown |
|---|---|
| Commercial lockout (standard entry) | $75-$150 |
| Panic bar installation | $350-$700 |
| Master key conversion | $40-$75 per cylinder |
| Access control per door | $800-$1,800 |
Will you quote a commercial job without seeing the building?
Most standard commercial jobs, including lockouts, rekeys, and panic bar swaps, get firm pricing on the phone. Larger projects like a full building master key system or multi-door access control get a written scope and a flat per-lock price before work starts. The price on the written scope is the price on the invoice.
Do you work on the old mortise locks downtown?
Yes. Downtown Georgetown’s limestone buildings still hold original mortise locks that need thread and spindle work, not blank swaps. We retrofit these in place, preserve the original faceplates where possible, and document every step with photos for the owner’s files.
Automotive Locksmith in Georgetown

Automotive locksmith calls in Georgetown follow the same pattern as the housing: Sun City residents locked out of cars in their own driveways, plus families across Wolf Ranch and Teravista dealing with transponder keys and worn ignitions in daily drivers. Georgetown’s summer heat also speeds up key fob battery failure and cracks plastic key housings, so fob programming and shell replacements are steady work here. We carry the programming tools for most major makes and come to the vehicle, wherever it sits. See our Automotive Locksmith hub for the full service range.
Car Lockout
Signs you need it
Keys are locked in the car, in the trunk, or lost entirely, and the vehicle is dead in a driveway, lot, or along Williams Drive.
What it costs in Georgetown
Car lockouts in Georgetown run $75-$160, priced on the phone before dispatch, with no surcharge added on arrival.
How we do it
We open the vehicle without damage using professional entry tools, verify your authorization, then hand you the keys and a written record of the call.
Car Key Replacement
Signs you need it
You have no spare, the last key broke, or the only key snapped in the ignition and the cylinder is jammed.
What it costs in Georgetown
Basic car key replacement in Georgetown runs $100-$180, transponder keys run $150-$350 including programming, and key fob programming runs $60-$120 when you already have the fob.
How we do it
We identify the key type by VIN or existing key, cut the blank, program the transponder or fob to the vehicle, and test the ignition and door locks before we leave.
What Automotive Locksmith Costs in Georgetown
| Item | Typical range in Georgetown |
|---|---|
| Car lockout | $75-$160 |
| Transponder key replacement | $150-$350 |
| Basic car key replacement | $100-$180 |
| Key fob programming (existing fob) | $60-$120 |
Can you make a car key without the original in Georgetown?
Yes. We cut new keys from the VIN for most makes, then program the transponder or fob to the car. Bring your registration and ID to prove ownership. The full price is quoted on the phone before we start.
Do you come to the vehicle or do I come to you?
We come to the vehicle, wherever it is in Georgetown: your driveway, a parking lot, or the side of I-35 at 9 p.m. The quote includes the trip, so there’s no call-out fee added when we arrive.
Brands We Service in Georgetown

We service and install Yale, Baldwin, Mul-T-Lock, and Sargent hardware, and we stock common parts for Schlage and Kwikset on the Georgetown route. Most standard hardware is same-day; special-order high-security cylinders are quoted in writing with the lead time up front. Browse our our brands page for the full line.
Pricing for Locksmith in Georgetown, TX
| Service | Typical range in Georgetown |
|---|---|
| Residential rekey, first lock | $75-$125 |
| Residential rekey, additional cylinders | $20-$35 each |
| Lock change (standard) | $85-$150 per lock |
| Deadbolt installation | $95-$180 per lock |
| Commercial lockout (standard entry) | $75-$150 |
| Panic bar installation | $350-$700 |
| Master key conversion | $40-$75 per cylinder |
| Access control per door | $800-$1,800 |
| Car lockout | $75-$160 |
| Transponder key replacement | $150-$350 |
| Basic car key replacement | $100-$180 |
| Key fob programming (existing fob) | $60-$120 |
What pushes a Georgetown job higher is usually age and access: downtown mortise work takes more time, Sun City hardware sometimes needs the full lock changed rather than rekeyed, and after-hours commercial calls follow the emergency schedule. One thing never pushes it higher after the quote: Haven Standard Clause 1 states the price on the phone is the price on the invoice, and Daniel Novak has run the business on that rule since 2002.
Neighborhoods We Serve in Georgetown

We cover the full Georgetown area, from the historic downtown square to the 55-plus villages of Sun City and the newer tracts pushing west and north. Typical response for emergency calls is under an hour in most of the city.
- Sun City Georgetown
- Wolf Ranch
- Teravista
- Old Town and downtown square
- Westhaven
Service Area - Cities Near Georgetown
Beyond Georgetown, we run regular routes through Round Rock, TX, Leander, TX, and Cedar Park, TX, and we cover Pflugerville, TX on the same dispatch schedule. If you’re a few minutes outside Georgetown, the same firm pricing and 24/7 live phone answer apply.
Serving Georgetown, TX - Our Local Coverage Area

We’re based in the Georgetown area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Locksmith in Georgetown
Emergency calls in Georgetown are typically reached in under an hour, with Sun City and the neighborhoods around Williams Drive usually faster because our route density is highest there. Scheduled jobs get a firm time window when you call. The dispatcher quotes the full price on the phone before anyone is sent.
For interior lock work, no. For exterior door hardware in an HOA like Sun City or Wolf Ranch, most associations require hardware finishes and sometimes brands to match the original. We can reuse your existing finishes and match the hardware style, and we’ll document the result with photos for your records and the HOA if needed.
All of Georgetown, including Sun City, Wolf Ranch, Teravista, downtown, and the outlying county roads. We also run regular routes through Round Rock, Leander, Cedar Park, and Pflugerville with the same live-answer phone and same upfront pricing. Call (331) 310-8471 and the dispatcher will confirm the exact address and give you a firm quote.
What happens when you call
- 1A real person answersNo phone trees - talk to a local locksmith pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Georgetown Customers Say
"Rekeyed the whole house after we bought it. He showed me the old pins and explained how many keys had likely been cut over the years."
- Omar J."Honest. Told me the existing deadbolt was good quality and only needed the strike plate reinforcing."
- Sal V."Fast, polite, and carried identification without being asked. Would use again."
- Grant W.






