Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Lock Installation & Rekey Across Brentwood
Lock installation and rekeying in Brentwood typically runs $65-$145 for a standard rekey and $180-$420 for new lock hardware installed, quoted in writing before we dispatch. Most Brentwood jobs are completed same-day, often within two hours of your call. If you bought a tract home built between 1999 and 2008, there’s a strong chance your exterior doors still carry the original builder-grade Kwikset deadbolts, and those locks are now at the age where tumblers wear out and cylinders start sticking. Call (331) 310-8471 and we’ll give you a firm price over the phone.
Why Novak Lock & Security Is Brentwood’s Preferred Lock Installation & Rekey Company
Daniel Novak founded this company in 2002 on a rule that hasn’t changed: the price quoted on the phone is the price on the invoice. Haven Standard Clause 1. Our technicians arrive in uniform, background-checked, and they leave you a documented photo record of every lock they touched before they drive away. That’s standard procedure, not an upgrade.
Brentwood homeowners call us because we know what’s behind these doors. The Shea, Pulte, and KB Home subdivisions that dominate this city were built fast, and they were built with the same handful of lock models across thousands of homes. When you describe a sticky deadbolt on a west-facing door in the summer, we know exactly what we’re going to find before we arrive. That local pattern recognition means faster diagnosis and a price that doesn’t shift once we’re standing in your doorway.
We coordinate with HOA management companies across Brentwood, including the gated communities and the Trilogy 55+ neighborhood, so rekeying a shared entry gate or a garage side door doesn’t stall while you track down board approval. This is routine work here. It isn’t elsewhere.
Key Takeaways
- Lock rekey in Brentwood: $65-$145 per cylinder, firm quote before dispatch
- New deadbolt or smart lock installation: $180-$420 including hardware and labor
- Same-day service across Brentwood, typically within two hours
- Written price before work starts, on every job, since 2002
- We service and install Yale, Baldwin, Mul-T-Lock, and Sargent hardware
Our Lock Installation & Rekey Services in Brentwood
Our Lock Installation & Rekey team handles everything from a single deadbolt swap to full-home rekeying with high-security cylinders. Here’s what Brentwood homeowners call us for most.
Smart Lock Installation
Brentwood’s housing stock was built for standard deadbolts, but a lot of homeowners are now retrofitting smart locks onto 2000s-era doors. The install usually goes smoothly when the door prep is standard, which it is on most Shea and KB Home builds. We install Yale and Schlage smart locks, connect them to your Wi-Fi and existing smart home hub, and test the full cycle: app unlock, keypad code, physical key override, and auto-lock timing. We also remove the old builder’s key path so the smart lock isn’t undermined by a worn cylinder underneath it.
Keyless Entry
Keyless entry makes the most sense on the garage side door and the back patio door, the two entries Brentwood residents actually use day to day. We install keypad deadbolts and lever sets that survive the Delta heat without the plastic housing cracking by August. Expect $220-$380 for a quality keyless deadbolt installed, depending on brand and whether we’re rekeying additional cylinders at the same time.
Keypad Lock
The keypad locks on Brentwood’s tract homes tend to fail in a specific way: the UV exposure on west- and south-facing doors breaks down the housing seal, then dust and heat get inside and the buttons stop registering. We replace these with weather-sealed Schlage and Baldwin keypad units, and we set codes on-site while you watch. You get a written record of the code structure we used, and you keep full admin control.
Biometric Lock
Biometric locks are still a niche request in Brentwood, but we’re installing more fingerprint readers on interior doors: home offices, gun safes, wine rooms, and the occasional exterior gate. The 100°F-plus summer heat doesn’t bother a quality biometric sensor the way it bothers a plastic keypad, which is one reason these are growing on homeowners here. We stock Mul-T-Lock and Yale biometric hardware and price it in writing before we order anything.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Brentwood
We’re factory-authorized for Yale, Baldwin, Mul-T-Lock, and Sargent, which means we can order exact-match cylinders, tailpieces, and strike plates instead of making generic hardware fit where it shouldn’t. Most Brentwood homes have Kwikset or Schlage entry hardware, and we stock common replacement parts for both locally so a rekey or cylinder swap doesn’t wait on a parts shipment. When you want to move up to high-security, we install Mul-T-Lock and Medeco cylinders that can’t be picked or bumped by standard tools, and we teach you how the key control works before we hand you the new keys.
Common Lock Installation & Rekey Problems We See in Brentwood Homes
- The builder’s key still works. A surprising number of Brentwood homes built in the early 2000s have never been rekeyed. The original builder’s key, or a subcontractor’s key, still turns every exterior deadbolt. We rekey these homes the day we’re called, and we replace the spring-loaded pins with bump-resistant spool pins to close the master key path permanently.
- Sticky deadbolts in summer heat. Brentwood’s inland Delta location means regular 100°F-plus days, and the west-facing doors on tract homes get cooked. The lubricant inside the cylinder dries out, and the pins and tumblers freeze up. We disassemble, clean, lubricate with a high-temp graphite carrier, and rekey if the pins show visible wear.
- Cracked keypad housings on garage side doors. The plastic housings on early-2000s keypad deadbolts crack after repeated heat cycles. The failure is so common in Brentwood’s tract subdivisions that we keep weather-sealed Schlage keypad units on the truck.
- HOA gate coordination. In gated Brentwood communities, including Trilogy, rekeying a shared pedestrian gate or the keypad at the community entrance requires approval from the HOA management company. We handle that communication for you, get the scope in writing, and complete the work once authorization is confirmed.
Pricing for Lock Installation & Rekey in Brentwood, TN
Standard lock rekey in Brentwood runs $65-$145 per cylinder, and most homes have three to five exterior cylinders. Full-home rekey, including the garage side door and any gate locks, typically lands between $195 and $395. New deadbolt installation with hardware runs $180-$320 per door, and smart lock installation runs $220-$420 depending on brand and connectivity requirements. Key duplication is $3-$8 for standard keys and $15-$45 for high-security or restricted keys. Every price is quoted on the phone before anyone is dispatched, and it is the price on the invoice. No call-out surcharge added on arrival. The dispatcher gives you a firm number, the technician honors it, and you get a written scope before any work starts.
We Also Serve Cities Near Brentwood
Our crews cover Lock Installation & Rekey in Brentwood and the surrounding area, including Franklin, Nashville, La Vergne, and Smyrna. If you’re in a neighboring city and need same-day lock work, call (331) 310-8471 and we’ll give you a firm quote and an arrival window over the phone.
Serving Brentwood, TN - Our Local Coverage Area
We’re based in the Brentwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Lock Installation & Rekey in Brentwood
Yes. The builder’s key on a 2005 Brentwood tract home is a live security hole because it means every contractor, subcontractor, and real estate agent who ever held a copy of that key can still open your front door. The builders used the same key blanks across entire subdivisions in Brentwood, and most homeowners never rekeyed after closing. We pull the cylinders, replace the pins with bump-resistant spool pins, and cut you new keys that eliminate the master key path entirely. Call (331) 310-8471 for a firm rekey quote, usually $65-$145 per cylinder.
Brentwood sits in the inland Delta heat pocket and regularly records summer highs above 100°F, which is significantly hotter than Walnut Creek or Concord just 20 to 30 miles west. That sustained heat dries out the lubricant inside lock cylinders and slightly expands the metal components, causing pins to bind. West-facing doors get the worst of it. We fix this with a full cylinder teardown, cleaning, and high-temp lubrication, and we rekey at the same time if the pins show wear. The fix typically takes under an hour per door.
If the locks are the original builder-grade Kwikset units, rekeying fixes the key-control problem but not the hardware quality problem. Those locks were inexpensive when they were installed and 15 to 20 years of Brentwood heat has not made them better. We tell customers straight: a rekey costs $65-$145 per cylinder and makes the existing lock secure against old keys. An upgrade to a Baldwin or Schlage deadbolt costs $180-$320 per door and gets you a stronger strike plate, better pin stacks, and a lock that will outlast the one the builder put in. We’ll show you the condition of your current hardware and give you both prices in writing before you decide.
Your smart lock and the HOA gate keypad are usually two separate systems, and the HOA controls the gate side. To connect them, the HOA management company has to authorize either a shared credential format or a separate code arrangement. We coordinate directly with the management companies in Brentwood’s gated communities, including Trilogy, to get written authorization and a defined scope before we touch the gate hardware. For your home’s smart lock, we handle the installation and programming on-site, and we’ll document the code structure so you’re not locked out if the HOA changes gate systems later. Call (331) 310-8471 and we’ll sort out both sides.
In Brentwood, unfortunately, yes. The plastic housings on early-2000s electronic keypads crack from sustained UV exposure and the 100°F-plus heat that hits west- and south-facing doors all summer. We see this failure pattern across the tract subdivisions constantly. The fix is a weather-sealed Schlage keypad unit with a metal-reinforced housing, which runs $220-$380 installed. We’ll also rekey the cylinder in the same visit so the new keypad isn’t mounted on a worn lock. Call (331) 310-8471 for a firm quote before you buy anything online.
Contact Novak Lock & Security in Brentwood
Call (331) 310-8471 now and a live person will answer. Tell us what’s going on with your locks, and we’ll give you a written price before anyone is dispatched. The technician who arrives is the technician who honors that price, no exceptions. We serve all of Brentwood, including the Shea, Pulte, and KB Home subdivisions, the Trilogy community, and the older farmhouse properties on the eastern fringes. Estimates are free, and the price you hear is the price you pay.
Written by Daniel Novak, Owner at Novak Lock & Security, serving Brentwood with written-price lock installation and rekeying since 2002.