Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Lock Installation & Rekey Across Canton
Lock rekeying in Canton typically costs between $65 and $125 for the first cylinder and $25 to $50 for each additional lock, quoted in writing before a technician is dispatched. New deadbolt installation runs $90 to $180 per lock depending on the hardware grade, and smart lock installation ranges from $150 to $350 including programming. Our Canton crews are local, background-checked, and arrive in uniform with the parts on the truck. Call (331) 310-8471 and a live person answers, day or night.
Canton is not a place where a generic locksmith visit makes sense. The township’s housing stock has a specific signature: thousands of colonial and ranch homes built in large planned subdivisions between 1985 and 2005, nearly all fitted with the same generation of builder-grade Kwikset and Schlage hardware. That matters when you need a lock replaced or rekeyed, because we already know what you have on your door before we pull up.
Why Novak Lock & Security Is Canton’s Preferred Lock Installation & Rekey Company
Our Lock Installation & Rekey team works Canton subdivisions every week: Pheasant Ridge, Barrington, Cherry Hill Village, Sunflower Village, and the condo communities along Ford Road and Haggerty. We know the hardware. More importantly, we know what happens to it as these homes age past the twenty-year mark.
Novak Lock & Security is led by Daniel Novak, who started this company in 2002 and built it around a single rule: the price on the phone is the price on the invoice. That is Haven Standard Clause 1, and it applies to every job we run in Canton. No dispatcher is allowed to give a soft estimate and let a technician raise it at the door. That rule is why Canton homeowners who research their options tend to land on us.
We answer our own phone, 24/7. When a Canton resident calls (331) 310-8471 at 10 p.m. because a deadbolt bound up in a February freeze-thaw cycle, there’s no voicemail tree. There’s a person. There’s a written price. Then there’s a uniformed technician with a documented photo record before and after the job.
Our Lock Installation & Rekey Services in Canton
Rekeying
Rekeying is the highest-volume residential job in Canton, and the reason is specific to this township. When you buy a home in a Pulte or Centex subdivision, the locks on your doors may share a factory pinning code with several other homes on the same street. A neighbor’s key can physically turn your deadbolt. Rekeying eliminates that risk in about twenty minutes per lock, and we re-key to a unique code, not a reused one from another job in the same phase of the subdivision. We never default to a shop code.
Smart Lock Installation
Canton homeowners are switching to smart locks on side doors and garage entry doors, not always on the front door. The pattern we see here is practical: families want keypad entry for kids coming home from Plymouth-Canton schools, and they want audit trails for babysitters and dog walkers. We install Yale and Schlage smart locks with Wi-Fi and Z-Wave modules, and we program them before we leave. The $150 to $350 range includes the hardware, programming, and the tutorial on managing access codes.
Keyless Entry
Keyless entry for Canton homes generally means a keypad deadbolt or a lever with a keypad built in. We stock both. For condo owners and renters in the apartment communities near Canton Center Road, we also install keypad entry systems on interior common-area doors where the freeholder or HOA approves the work. The written quote covers the hardware and the programming; there is no separate “setup fee” added after the fact.
Keypad Lock and Biometric Lock
Keypad locks are the most common upgrade we install in Canton’s colonial floor plans, where the garage entry door and the mudroom door see ten times the traffic of the front door. Biometric locks, by contrast, are mostly showing up in Cherry Hill Village and the newer builds along Geddes Road where homeowners want fingerprint entry for a home office or a gun safe conversion. We carry Baldwin and Mul-T-Lock biometric options and quote them the same way: written price, no dispatch without it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Canton
We are factory-authorized on Medeco, Mul-T-Lock, and Abloy, and we service the full range you’ll find on Canton doors: Kwikset, Schlage, Baldwin, Yale, and Sargent. We stock rekey kits, tailpieces, and strike plates for these brands on the truck, which means a rekey or hardware swap rarely requires a second trip. For high-security work, including restricted key systems where no unmarked copy can be cut without your authorization, we order from the factory and schedule installation once the cylinders arrive. You get the factory key card and the order record in writing.
Common Lock Installation & Rekey Problems We See in Canton Homes
- The neighbor’s key opens your door. This is the most disturbing call we get in Canton’s Pulte and Centex subdivisions. Builder locks shipped pre-keyed to the same factory code across a phase of homes. We rekey every exterior lock to a unique code and, if you want, step you up to restricted key control so unmarked copies cannot circulate. This is a known issue in 1985-2005 tract construction, and it’s more common than most homeowners would believe.
- Deadbolts that bind every winter. Canton’s freeze-thaw cycles swell wood door frames, and a deadbolt that was perfectly aligned in September can refuse to throw in February. Homeowners shoulder the door, and the latch eats into the frame. We re-align the strike plate, lift the door if the hinges have sagged, and shave the frame where needed - not just lube the lock.
- Exterior cylinders frozen over. Canton sits in the Lake Erie weather corridor, and freezing rain is a regular event. Homes without storm doors get ice inside the keyway. We carry de-icing compound and, when the cylinder has been damaged by repeated freeze-thaw, we replace it rather than forcing it.
- Condo and apartment lockouts that destroy cylinders. In multi-tenant buildings along Ford Road and Canton Center, residents locked out of a common area sometimes force the door with improvised tools. The cylinder gets destroyed, and the freeholder is stuck with the bill. We replace these with commercial-grade cylinders and, when the property manager wants it, a restricted master-key system so a copied key doesn’t become a building-wide problem.
Pricing for Lock Installation & Rekey in Canton, MI
Here are the numbers we quote for Canton work, every time, before dispatch:
- Rekey a standard Kwikset or Schlage cylinder: $65-$125 per lock
- New ANSI Grade 1 deadbolt installed: $120-$180
- Smart lock (Yale, Schlage) supplied and installed: $220-$350
- Keypad deadbolt supplied and installed: $180-$280
- Restricted high-security cylinder (Medeco, Mul-T-Lock): $150-$250 per cylinder
- Emergency after-hours unlock: written quote on the phone, never raised at the door
What affects the range: the lock brand, whether we’re rekeying to standard pins or high-security, and how many cylinders are involved. But the price you hear on the phone is the price on the invoice. That is Haven Standard Clause 1, and it has been the rule since 2002. Call (331) 310-8471 for an exact quote. Estimates are free, and we do not charge a dispatch fee that materializes after arrival.
We Also Serve Cities Near Canton
Our Canton crews also run calls in Westland, Livonia, Redford, and Novi. If you’re just over the township line, the same written pricing applies and the drive time is short. We stock the same Canton-era hardware on the truck, because the housing stock in the surrounding communities shares the same builder-grade DNA.
Serving Canton, MI - Our Local Coverage Area
We’re based in the Canton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Lock Installation & Rekey in Canton
The fastest way is to ask us to run a rekey and cylinder inspection. We can identify the factory pinning pattern and tell you whether your locks are still on the builder code. In Pulte and Centex phases built between 1985 and 2005, same-code locks are common enough that we check it on every rekey call in Canton. If you want to be sure it’s eliminated, rekey to a unique code and ask about key control. Call (331) 310-8471 and we’ll schedule the inspection.
No. Rekeying replaces the internal pins, not the lock body or the door hardware. We do it in place. If the freeholder already uses a master-key system, we cut keys to the existing master rather than breaking the system. The written quote we give you covers the rekey and the new keys; nothing about the freeholder’s hardware gets damaged or altered without their approval.
The wood door frame swells and shifts during freeze-thaw cycles, which pulls the strike plate out of alignment with the deadbolt. That’s a Canton-wide pattern from November through March. The fix is usually re-alignment, not a new lock: we adjust the strike, lift the door if the hinges have sagged, and free the bolt so it throws without shoulder pressure. We do this year-round, but most of our binding-deadbolt calls come in February.
No, not if the stamp is meaningful. A “Do Not Duplicate” marking is a request, not a legal restriction, but we honor it unless you can show written authorization from the property manager or freeholder. A real restricted key system with a signed key-control agreement is the reliable way to prevent copies, and that’s something we set up for Canton property managers regularly. It costs more than a hardware-store copy, and it actually works.
Yes. We install and service smart locks, keypads, and electronic entry in Cherry Hill Village and the newer builds along Geddes Road and Cherry Hill Road. These homes often come with builder-installed smart locks that were never properly programmed or tied to the homeowner’s Wi-Fi. We’ll re-key them mechanically, reset the access codes, and pair them with your home network. The price is written before we arrive, same as every other Canton job.
Call Novak Lock & Security in Canton
If you live in Canton and you haven’t rekeyed your locks since you bought the house, start there. The same-key problem in this township’s tract subdivisions is real, and it is fixable in one visit. Call (331) 310-8471 for a free estimate. The dispatcher gives you a written price on the phone. The technician honors it at the door. That is how Daniel Novak has run this company since 2002, and it is how we run every job in Canton.
Written by Daniel Novak, Owner at Novak Lock & Security, serving Canton and surrounding communities under The Haven Standard.
Lock Installation & Rekey in Nearby Areas