Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Lock Installation & Rekey Across Coral Springs
Lock installation and rekey work in Coral Springs runs $85-$225 per lock, and most jobs are completed in a single visit. We carry the hardware that actually holds up here: corrosion-resistant deadbolts, HOA-compliant cylinders, and marine-grade components built for Broward County humidity. Call (331) 310-8471 and we’ll give you a written price before anyone is dispatched.
If you live in Coral Springs, you already know the drill: your HOA has rules about what hardware goes on your front door, your patio slider is original to a house built in 1983, and every June your deadbolt gets harder to turn. We work in this specific set of conditions every day. That’s why our Lock Installation & Rekey teams are stocked for what Coral Springs homes actually need, not what a generic parts catalog says they need.
Why Novak Lock & Security Is Coral Springs’s Preferred Lock Installation & Rekey Company
Novak Lock & Security was founded in 2002 by Daniel Novak on one rule: the price you’re quoted on the phone is the price on the invoice. Haven Standard Clause 1. Every technician who rolls into Coral Springs is background-checked, uniformed, and contractually prohibited from changing the quote at your door. We’ve installed or serviced over 60,000 locks, keys, and systems since 2002, and each one came with a written price before we started and a documented photo record when we left.
What that means for a Coral Springs homeowner is simple. When we tell you a rekey costs a certain amount, that’s what it costs. When we say we’ll be there in 60 minutes, that’s where we’ll be. You don’t get a bait price and a “discovery” of extra charges standing in your doorway at night. You get the number, the written scope, and the work. We’ve been doing it this way across Coral Springs long enough that most of our new customers come from a neighbor’s referral.
Our crews know the subdivisions here, from Kensington Glen to The Hills to Cypress Run. They know which HOAs require Schlage hardware, which gate systems run Mul-T-Lock cylinders, and which 1970s ranch homes still have their original Weiser locks. That local knowledge isn’t marketing. It’s what lets us tell you, before we arrive, what we’re likely to find.
Our Lock Installation & Rekey Services in Coral Springs
Smart Lock Installation
Smart lock installation in Coral Springs typically runs $165-$285, including the lock, if you want a WiFi or Bluetooth model on your front door. We install Yale and Schlage smart locks most often here because they hold up to humidity and work with the deadbolt prep already on most Coral Springs doors. If your HOA requires a specific keyway or finish, we verify that before we order anything.
Keyless Entry
Keyless entry for a Coral Springs home usually means a keypad deadbolt or an access system for a gated community entrance. Residential keypad installs run $140-$250. Community gate and entry panel work is scoped and quoted in writing after a site survey, never over the phone. We program, test, and leave you the admin code along with a printed photo record of the finished job.
Keypad Lock
Replacing a failing keypad deadbolt in Coral Springs costs $130-$240, and we stock common models so same-day replacement is normal. The two things that kill keypads here are humidity intrusion and UV exposure on south-facing doors. If your keypad is five years old and reads slow or eats batteries, we’ll tell you whether the fix is a rekey or a full replacement. We don’t sell what you don’t need.
Biometric Lock
A fingerprint or biometric deadbolt installation in Coral Springs runs $250-$420, depending on the model and your door prep. Biometric locks work fine in Broward County humidity, but we recommend models with a physical key override from a brand like Yale or Baldwin. That way, if the sensor fails during a June downpour, you’re not locked out of your own house at 2 a.m.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Coral Springs
We’re factory-authorized on Medeco, Mul-T-Lock, Abloy, Baldwin, and Schlage, and we rekey and service Yale and Kwikset daily. For Coral Springs, the brands that matter most are the ones your HOA already approved. We stock common Schlage and Mul-T-Lock cylinders locally, which means we don’t have to order parts from a distributor and make you wait three days. If you bring us a competitor’s written estimate, we’ll review it at no charge. We’ll tell you if it’s fair, and we’ll tell you if it’s wrong.
Common Lock Installation & Rekey Problems We See in Coral Springs Homes
- Swollen aluminum door frames binding deadbolts. Coral Springs homes built in the 1970s and 1980s used aluminum door frames. In Broward County’s summer humidity, those frames absorb moisture and expand, misaligning the deadbolt. The lock isn’t broken. The frame moved. We realign or shim the strike plate and often upgrade to a thicker deadbolt latch that tolerates the movement.
- Corroded cylinders from 40-plus years of humidity and rain. The original Weiser, Kwikset, and Schlage hardware on pre-1992 Coral Springs homes has spent four decades in wet air. The pins corrode, the springs weaken, and keys eventually stop turning. We see it every June. The fix is a rekey with new pins and springs, or a full cylinder replacement if the housing is pitted.
- Sliding glass patio door locks failing on original 1970s and 1980s sliders. Most Coral Springs ranch homes still have their original sliding glass doors. The hook locks and foot bolts on those doors corrode and seize. We replace them with stainless or marine-grade components and adjust the roller assembly so the door actually latches.
- HOA-mandated hardware that was never installed correctly. Some Coral Springs HOAs specify exact deadbolt models and keyways. When a previous owner installed whatever was on sale at the hardware store, the association flags it during a resale inspection. We bring the door into compliance with the right hardware vendor, the right finish, and the right keying.
Pricing for Lock Installation & Rekey in Coral Springs, FL
Here’s what you should expect to pay in Coral Springs for common lock work. A standard rekey runs $85-$125 for the first cylinder and $25-$40 per additional cylinder, with all keys cut to the new pattern. Deadbolt installation ranges $110-$195 for a standard ANSI Grade 2 model and $180-$310 for a Grade 1 high-security unit. Smart lock installation is $165-$285. These are honest ranges for our market. Your full price gets quoted in writing on the phone, before we send a truck, and that is the price on the invoice. There is no call-out surcharge added when the tech arrives.
| Service | Coral Springs Price Range |
|---|---|
| Rekey (first cylinder) | $85-$125 |
| Each additional cylinder rekeyed | $25-$40 |
| Standard deadbolt installation | $110-$195 |
| High-security deadbolt (Grade 1) | $180-$310 |
| Smart lock installation | $165-$285 |
| Keypad deadbolt replacement | $130-$240 |
| Biometric lock installation | $250-$420 |
What moves the cost is the hardware grade, the condition of your existing door and frame, and the number of cylinders. A house with four exterior doors and a patio slider rekeyed to one key will cost more than a single front door. But the quote you get is the quote you pay. That rule has not changed since Daniel Novak started the company in 2002.
Why Coral Springs Locks Fail Differently Than Margate or Tamarac
Coral Springs was built from the late 1960s onward as a rigorously master-planned community by Coral Ridge Properties. That’s a different starting point than Margate or Tamarac, which grew up more organically. What it means for your locks today is that virtually every subdivision operates under HOA deed restrictions that govern door hardware. Approved deadbolt models. Approved finishes. Required community keying standards for gates and common areas. Locksmith work here is compliance work. If you replace a front door lock with the wrong keyway, your HOA management company will catch it at some point, usually during a resale inspection or a routine exterior audit.
On a service call in the Kensington Glen subdivision, our tech arrived to find a 1980s-era aluminum door frame that had swollen in Broward County humidity, binding a builder-grade Kwikset deadbolt so badly the cylinder would not turn. Using non-destructive entry, we worked the lock open, then replaced the corroding pin and tumbler hardware with an ANSI Grade 1 Schlage deadbolt rated for coastal humidity, and rekeyed the lock cylinder so the homeowner’s old keys would no longer work. We also coated the strike plate and adjuster with anti-corrosion compound to prevent future seizing.
The other thing Coral Springs has in unusual concentration is gated entries and guardhouse access systems. There are more HOA-governed gate systems here than almost anywhere else in Broward County. That means local locksmiths regularly program electromagnetic gate locks, keypad entry panels, and tiered master key hierarchies. In most neighboring cities, that kind of commercial work only shows up at apartment buildings. Here, it’s a residential subdivision feature. We handle community keying systems for HOAs and individual homeowner lock work under the same written-price rule.
We Also Serve Cities Near Coral Springs
Our crews also take calls from Margate, Coconut Creek, Pompano Beach, and Plantation for Lock Installation & Rekey in Coral Springs and surrounding areas. If you’re just outside Coral Springs proper, call and tell us which subdivision you’re in. We’ll confirm coverage and give you the same written price before dispatch.
Serving Coral Springs, FL - Our Local Coverage Area
We’re based in the Coral Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Lock Installation & Rekey in Coral Springs
Those locks are simply old, and they were built to a lower standard. Pre-1992 Coral Springs homes carry their original builder-grade deadbolts and sliding door locks, which use zinc and mild-steel components that corrode in Broward County’s wet heat. Newer homes, especially post-Hurricane Andrew construction, were built with heavier impact-rated hardware and stainless internals that resist humidity far better. The old hardware wasn’t defective when installed. It has just outlived its useful life. Call (331) 310-8471 and we’ll tell you what grade your current locks are and what a rekey or replacement should cost.
Yes. We service community keying systems for Coral Springs HOAs and can match your lock cylinders to the association’s approved keyway and master hierarchy. Bring us a copy of your HOA’s hardware spec, or we can contact your property manager directly. We’ll quote the rekey in writing on the phone, and the price holds. The 365-Day Done Right Promise covers every rekey we perform.
It’s common here, especially in homes with original aluminum frames and builder-grade locks. The rainy season, starting around June, pushes humidity high enough that aluminum door frames swell and cylinders collect corrosion. Your key stopped turning because the cylinder pins are binding or the deadbolt latch is no longer aligned with the strike plate. It’s not normal wear-and-tear you should live with. It’s a mechanical failure we can fix, usually same day, for $85-$195 depending on whether it’s a simple rekey or a hardware replacement.
No license beyond standard state locksmith credentials, which we hold. What you do need is approval from your HOA for the specific hardware and finish you install. That’s not a legal requirement from the city of Coral Springs; it’s a deed restriction attached to your property. We’ve rekeyed and replaced locks in dozens of Coral Springs subdivisions, and we know how to pull the hardware spec from your management office or tell you exactly what to request. A rekey to your HOA’s keyway typically runs $85-$125 for the first cylinder.
The permanent fix is to replace the corroded hook lock and foot bolt with stainless or marine-grade components, and to keep the track free of standing water and debris. We can also apply an anti-corrosion coating to the internal mechanism, which extends the life of the lock by several years in this climate. The materials cost more than big-box hardware. The parts are usually $40-$90 on top of the labor. If your slider is original to a 1970s or 1980s Coral Springs home, plan on a replacement rather than a repair. Call (331) 310-8471 for a written price.
Contact Novak Lock & Security in Coral Springs
If you need a lock installed, rekeyed, or upgraded in Coral Springs, call (331) 310-8471. A live person answers, day or night. We’ll give you the written price before anyone is dispatched. You’ll get a background-checked, uniformed technician, a documented photo record of the completed work, and the 365-Day Done Right Promise on every lock we touch. Estimates are free.
Written by Daniel Novak, Owner at Novak Lock & Security, independently owned and operated and serving Coral Springs under The Haven Standard since 2002.