Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Lock Installation & Rekey Across Dania Beach
Lock installation and rekeying in Dania Beach typically runs $20-$35 per cylinder for rekeys and $95-$250 for new lock or deadbolt installation, hardware included. Most jobs are completed the same day we take your call, and the dispatcher quotes a firm price before anyone gets in the van. That price is the price on the invoice. It has been that way since 2002.
Dania Beach’s housing stock is older than most of Broward County. That means we’re not just swapping hardware. We’re working around original mortise locks, worn CBS bungalow doors, and salt-corroded cylinders from direct Atlantic exposure. If you live off Federal Highway or anywhere near the beach, you’re dealing with conditions a locksmith from inland doesn’t plan for. We do. Call (331) 310-8471 and you’ll talk to a person, not a recording.
Why Novak Lock & Security Is Dania Beach’s Preferred Lock Installation & Rekey Company
Daniel Novak founded this company in 2002 around one rule: the price quoted on the phone is the price on the invoice. Haven Standard Clause 1. There is no call-out surcharge added at your door in Dania Beach, no bait figure that balloons once the technician arrives. Our dispatchers quote a written price before dispatch. Our technicians are not permitted to change it on site.
Every Dania Beach job is handled by a background-checked, uniformed technician. When the work is done, you receive a documented photo record showing the lock opened, the pins repinned, and the hardware after reassembly. That’s not a courtesy. It’s procedure. If anything is not done right, the 365-Day Done Right Promise means we make it right at no charge. That promise applies to every lock installation, rekey, key duplication, and emergency call we make in Dania Beach.
Response to Dania Beach is fast because scheduling is coordinated from our Miami (South FL) office, with crews dispatched directly to the city. From US-1 to the beachside condos off Dania Beach Boulevard, we know the streets and the hardware on them.
Our Lock Installation & Rekey Services in Dania Beach
We offer the full range of Lock Installation & Rekey services, but three come up constantly in Dania Beach: smart lock installation, key duplication, and keyless entry. Here’s the detail on what we handle.
Smart Lock Installation
Smart locks on Dania Beach oceanside properties fail faster than anywhere inland, no matter the brand. Salt-laden humidity works into keypad contacts and circuit boards, and a lock that would last a decade in Plantation often starts glitching in two to three years a block from the beach. When we install smart locks in Dania Beach, we specify models with marine-rated contacts and encapsulated electronics, and we replace the strike plate with a reinforced plate so the deadbolt throw seats cleanly even in a 1960s door frame that has settled. Expect $180-$350 installed, depending on the lock’s grade and whether you need a Wi-Fi bridge.
Keyless Entry
Keyless entry for a Dania Beach condo or bungalow usually means a keypad deadbolt or a lever with an integrated keypad. We install both. The honest caveat: a keypad mounted on a door that gets direct eastern sun and salt spray will need its battery and contact points serviced more often than one inland. We show you how to do the basic maintenance and we stock replacement keypads locally so a callback doesn’t mean waiting on a part. Installed keyless entry runs $150-$300 per door.
Key Duplication
Duplicating a standard Kwikset or Schlage key is fast and cheap: $2-$6 per key at our mobile service. What takes more care is duplicating keys for the older hardware on Dania Beach’s Federal Highway antique row. Original Sargent and Corbin mortise keys from the 1940s and 1950s don’t match modern key blanks. We cut them from vintage profile blanks by hand, then test the key in the lock before we hand it back. If you own a shop on US-1 with original locks, you already know how many places can’t cut those keys. We can.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Dania Beach
We’re factory-authorized for work on Baldwin, Mul-T-Lock, and Abloy hardware, and we service Sargent mortise locks that other companies won’t touch. We keep common Baldwin cylinders and Schlage and Kwikset hardware on our trucks, which means most Dania Beach jobs are done in a single visit. If you need a Mul-T-Lock high-security cylinder, we can’t pick it and neither can anyone else with standard tools. That’s the point. We quote it in writing before we order anything.
Common Lock Installation & Rekey Problems We See in Dania Beach Homes
- Original 1940s-1960s mortise locks on Federal Highway storefronts. These locks are mechanically sound but often gummed with decades of graphite and salt dust. A rekey solves most of them. A replacement cylindrical lock is rarely the right call, and shop owners know it.
- Salt-corroded exterior cylinders near the beach. Pins and springs inside the cylinder pit and seize, so the key feels gritty or won’t turn. Rekeying the old cylinder won’t help. We replace the cylinder with a marine-grade one and rekey everything to a single key.
- Worn original locksets on 1950s CBS bungalow doors. The door has settled over 60 years, the strike plate is off by a fraction of an inch, and the deadbolt drags. We adjust or replace the strike plate during the install so the lock seats without forcing the door.
- Smart lock failures on oceanside condos. A keypad that works perfectly in a Hollywood living room fails within a couple of years in a Dania Beach condo three blocks from the water. Before you blame the lock, check the contacts. Then call us. We’ll tell you whether it’s repairable or should be replaced with a non-electronic deadbolt.
Pricing for Lock Installation & Rekey in Dania Beach, FL
Here are the ranges we quote in Dania Beach, in writing, before any work starts:
- Rekey a single lock: $20-$35 per cylinder, plus the service-call minimum, depending on how many locks we’re doing at one address
- Rekey an entire Dania Beach home (3-5 locks to one key): $90-$160 total
- New deadbolt installation (standard cylindrical): $95-$180, hardware included
- High-security cylinder installation (Mul-T-Lock, Abloy): $150-$350 per cylinder
- Key duplication (standard profile): $2-$6 per key
- Vintage mortise key cutting (Federal Highway antique hardware): $12-$30 per key, cut by hand from original-profile blanks
What changes the price is the hardware grade, the age and condition of the door, and whether we’re rekeying existing hardware or installing new. Labor is quoted flat for the job, not by the hour. You’ll know the total before we dispatch, and that total won’t change when the tech arrives. Estimates are always free. Call (331) 310-8471 and ask for the written quote.
Dania Beach’s Older Doors: What Can Be Rekeyed vs. What Needs Replacing
Dania Beach is Broward County’s oldest incorporated city, and its Federal Highway corridor is marketed as the Antique Capital of the South. The 1930s-1950s storefronts along US-1 still carry original mortise locks and skeleton-key hardware that owners insist on preserving. Replacing that hardware isn’t an upgrade to these owners; it’s devaluation. So the question we answer more often in Dania Beach than anywhere else is a simple one: can this be rekeyed, or does it actually need to be replaced?
The answer usually comes down to the lock body. A 1940s Corbin or Sargent mortise lockset with intact internals can almost always be rekeyed. We pull the cylinder, replace the worn pin and tumbler stack, cut new keys to fit the original skeleton-key profile, and adjust the strike plate so the old warped door latches without shaving the frame. The lock stays. The key changes. That’s the correct repair.
On a Federal Highway storefront near the antique row, our crew rekeyed a 1940s Corbin mortise lockset for a shop owner who refused a modern cylindrical replacement. We pulled the lock cylinder, replaced the worn pin and tumbler stack, cut new keys to match the original profile, and adjusted the strike plate so the warped original door would latch without shaving the frame. The owner told us any tech who showed up with a replacement lockset would have been sent away.
But there are times replacement is the honest call. A mortise lock body that’s cracked, or has years of salt pitting inside the case, won’t hold a rekey reliably. Same for a bungalow door so warped that no strike plate adjustment will seat the deadbolt. In those cases we say so plainly and quote a replacement that fits the door correctly, which sometimes means sourcing a mortise lockset that matches the period hardware rather than retrofitting a cylindrical deadbolt.
For the 1950s CBS bungalows that make up much of Dania Beach’s residential core, the question is usually easier. Original entry locksets with worn cylinders can be rekeyed inexpensively. If there’s no deadbolt, that’s the first upgrade we recommend, and not a cosmetic one. Reinforced deadbolts on concrete block homes are the single biggest security improvement per dollar you can make in this city.
We Also Serve Cities Near Dania Beach
While this page is for Dania Beach, our crews regularly work the surrounding metro. If you’re in Jacksonville, Miami, Tampa, or Orlando, the same written-price rule and the same 365-Day Done Right Promise travel with us, and our dispatcher can schedule you the same way. Call (331) 310-8471 from anywhere in Florida and you’ll reach a live person.
Serving Dania Beach, FL - Our Local Coverage Area
We’re based in the Dania Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Lock Installation & Rekey in Dania Beach
Most original mortise locks on Dania Beach’s Federal Highway antique row can be rekeyed. We pull the cylinder, replace the pin and tumbler stack, cut new keys to the original profile, and leave the lock body in place. Replacement is only necessary when the lock case is cracked or so corroded inside that pins won’t seat reliably. Call (331) 310-8471 and a technician can assess your specific lock and quote the rekey in writing.
Salt-laden air and constant humidity corrode the contact points inside keypad and smart lock electronics, and Dania Beach properties get direct Atlantic exposure that inland cities don’t experience. We recommend marine-grade models with sealed contacts for oceanside condos, and we’ll quote the exact hardware in writing before installation.
Rekeying changes the internal pins so the old key no longer works and a new key does. Replacing the cylinder swaps out the entire locking mechanism. For salt-corroded or heavily worn cylinders on Dania Beach exterior doors, replacement is often the only fix that holds. For a clean cylinder, rekeying is faster and cheaper. We’ll show you the cylinder condition and quote whichever is correct.
Not necessarily. A properly rekeyed and maintained mortise lockset with an intact deadbolt function holds as well as many modern residential locks. The weakness isn’t the mortise body; it’s years of no maintenance. We rekey the cylinder, service the internal springs and levers, and adjust the strike plate, which returns the lock to working condition without replacing period hardware.
If the key turns smoothly and the deadbolt seats without dragging, a rekey is usually all you need, at $20-$35 per cylinder. If the key is loose in the cylinder, the deadbolt grinds, or the door has settled enough that the latch won’t seat, you likely need new hardware or a strike plate adjustment. We’ll diagnose it at the door and quote both options in writing before any work begins. Call (331) 310-8471 for a free estimate.
Written by Daniel Novak, Owner at Novak Lock & Security, serving Dania Beach since the company’s founding in 2002.
Lock Installation & Rekey in Nearby Areas
