Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Lock Installation & Rekey Across Deltona
Lock rekeying in Deltona typically runs $25-$45 per cylinder, and full deadbolt replacement with installation usually lands between $95-$180 per lock when the door frame is sound. If the door has warped, the price rises because the frame needs correction before a proper lock will work. That is the honest range, and we quote it in writing before anyone gets in a van. Call (331) 310-8471 and a live person answers, day or night.
We work across Deltona daily, from the older GDC blocks near Deltona Boulevard and Howland Boulevard down through the newer subdivisions west of Fort Smith Boulevard. Most of what we see here isn’t complex security work. It’s hardware that’s 40 or 50 years old, frames that have shifted in the humidity, and landlords who need a rekey done before the next tenant walks through the door.
Why Novak Lock & Security Is Deltona’s Preferred Lock Installation & Rekey Company
Deltona is not like most Florida cities. It was laid out by General Development Corporation starting in the late 1960s as one of the largest planned residential communities in American history. That means thousands of homes share nearly identical builder-grade lock hardware from the same era. When we show up to a house on Providence Boulevard, we usually know what’s on the door before we open it. That’s not a party trick. It’s just what happens when you service enough of the same building stock.
Our Lock Installation & Rekey team handles everything from a single cylinder swap to a full rental turnover with a master key system. We’re led by Daniel Novak, who founded this company in 2002 on a rule that sounds simple and isn’t: the price quoted on the phone is the price on the invoice. Every Deltona job works that way. The dispatcher gives you a firm number. The technician is not allowed to change it at the door. We’ve operated that way for more than two decades, and the rule appears in writing as Haven Standard Clause 1.
We answer calls around the clock with a live person, not an automated queue. Background-checked, uniformed technicians arrive with a written scope. When they leave, you get a documented photo record of the work and the hardware condition. That documentation is standard, not an upgrade. It’s part of The Haven Standard that every Novak tech works under, and it’s the reason Deltona landlords and homeowners keep our number saved.
Our Lock Installation & Rekey Services in Deltona

Smart Lock Installation
Smart locks in Deltona present a specific problem: hollow-core doors. The original GDC homes were built with slabs and light interior doors, and the front entry doors were not much heavier. A universal smart lock adapter flexes on those thin doors, and the keypad starts misreading codes within a few weeks. We see it constantly in the subdivisions off Courtland Boulevard. The fix is usually a reinforced mounting plate or, on some doors, a glass-filled nylon backplate that stiffens the chassis. We’ll tell you if your door can take the smart lock you bought, before we charge you anything.

Keyless Entry
Keyless entry for a Deltona rental almost always means a keypad deadbolt with a code the tenant can use and the landlord can delete remotely or at the keypad. We install these on GDC-era front doors regularly, but we also match the throw length to the swollen frame. If the bolt doesn’t fully extend into the strike, the lock reports a closed status when the door is not actually secure. That’s the kind of failure only shows up after a storm, which in Deltona means every afternoon from June through September.

Keypad Lock
A keypad lock on a Deltona home has to survive near-daily summer rain and humidity that condenses behind the faceplate. We spec keypads with sealed electronics and nickel-plated internals, and we shim the strike plate so the bolt travels clean even when the frame has moved. On rental properties, we prefer keypad deadbolts with a physical key override, because a dead battery at 9 PM on a weekend should not strand a tenant.

Biometric Lock
Biometric locks read a fingerprint, and Deltona’s heat and humidity can degrade a cheap sensor within a year. We install biometric units with coatings that resist corrosion and with backup keyways, because a fingerprint reader that works 99 times out of 100 is not good enough when the 1 failure is your tenant locked out at midnight. For landlords, we can pair a biometric lock with a keypad auxiliary and a master key, so the owner always has a physical override that no code or fingerprint can lock out.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Deltona
We install and service the full spectrum, from builder-grade Schlage and Kwikset up through Medeco, Mul-T-Lock, Baldwin, and Yale. For Deltona’s older GDC housing stock, we often recommend a bump-resistant pin and tumbler cylinder from Schlage or Mul-T-Lock rather than replacing the whole hardware set, because the original knob and tailpiece are still functional and the cylinder upgrade closes the real vulnerability. We stock common cylinders, deadbolts, and smart lock hardware locally, so most Deltona jobs are completed same day.
Common Lock Installation & Rekey Problems We See in Deltona Homes

- Swollen GDC door frames that jam a new deadbolt. The original hollow-core doors on 1960s and 1970s tract homes have absorbed decades of humidity. We routinely shave the strike plate mortise and re-cut the latch recess so a new bolt extends fully. If this step is skipped, the lock reports locked when the door can still be pushed open.
- Worn original cylinders that have never been rekeyed. Many Deltona homes still have their 1970s Kwikset cylinders, now so worn that any key of the same profile can jiggle the pins. These need replacement or rekeying to a bump-resistant pin and tumbler setup, not just a new key.
- Bypassed or failed sliding glass door latches. GDC marketed these homes with Florida-lifestyle sliders as the rear entry. The original late-1960s and 1970s latch locks are now routinely failed or entirely absent. We find rear slider doors that can be opened without any lock engagement, often on homes where the front deadbolt was just replaced.
- Smart locks mounted on thin doors that flex. The universal adapter plates included with most retail smart locks are sized for solid-core doors. On Deltona’s hollow-core front doors, the plate flexes and the keypad drifts out of alignment. We reinforce the mount or substitute hardware that sits rigid on a thin door.
Pricing for Lock Installation & Rekey in Deltona, FL
Here is what Deltona customers should expect to pay, in writing, before any technician is dispatched:
| Service | Typical Range in Deltona |
|---|---|
| Rekey a single cylinder | $25-$45 |
| Rekey an entire home (3-5 cylinders) | $95-$190 |
| New deadbolt installation (standard, frame sound) | $95-$180 per lock |
| Smart lock installation | $140-$260 per lock |
| Keypad deadbolt installation | $160-$290 per lock |
| Sliding glass door latch replacement | $85-$160 |
| Key duplication | $3-$8 per key, $12-$30 for high-security |
What changes the price is the door frame, not the lock. A warped GDC-era frame that needs strike adjustment adds $35-$75 to the job because the tech has to cut the mortise and test the bolt throw. A smart lock on a hollow-core door that needs reinforcement adds $30-$60. We give you the full number on the phone, and that is the number on the invoice. Call (331) 310-8471 for a free, written estimate for Lock Installation & Rekey in Deltona.
We Also Serve Cities Near Deltona

Novak Lock & Security serves Deltona and the surrounding communities including Sanford, Altamonte Springs, Apopka, and Orlando. Dispatch and scheduling are coordinated from our metro office, and crews serve Deltona locally. The same written-price rule, the same documented photo record, and the same 365-Day Done Right Promise apply everywhere we work.
Serving Deltona, FL - Our Local Coverage Area
We’re based in the Deltona area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Lock Installation & Rekey in Deltona

Usually we can rekey the original cylinders if they have not worn beyond tolerance, and a rekey runs $25-$45 per cylinder. If the pins have mushroomed from decades of use and repeated duplicate keys, we recommend a new cylinder with a bump-resistant pin and tumbler setup, which starts around $45-$70 per cylinder installed. The honest answer is that every GDC-era cylinder we see gets inspected for wear before we quote either route. Call (331) 310-8471 and we’ll tell you what you actually need before you spend anything.
Because the original late-1960s and 1970s slider latches on GDC homes are almost universally failed by now, and most homeowners never check them. We test every entry point when we arrive, not just the one you called about. A rear slider that opens without a key is a real vulnerability, and replacing the latch runs $85-$160. We will show you the photo record of what we found.
Humidity condenses inside the cylinder shell, and the brass pins and springs corrode. The pins stick, the key feels gritty, and eventually the cylinder seizes entirely. In a drier climate that same cylinder might last another decade. In Deltona, near-daily summer thunderstorms and persistent humidity mean we see seized or sticky cylinders on 10-year-old hardware. The fix is a corrosion-resistant replacement cylinder, and we can rekey the new cylinder to match your existing keys so you don’t carry a second ring.
On most GDC-era doors, yes, if the existing deadbolt is a standard 2-1/8-inch bore and the door is not so warped that the bolt throws out of alignment. We use retrofit smart locks that mount on the existing hole, and we reinforce hollow-core doors with a backplate so the keypad does not flex. If your door needs frame correction first, we quote that before installing anything. Call (331) 310-8471 for a written estimate.
Yes. Every tenant turnover should include a rekey, because you have no idea how many copies of the previous key exist. For Deltona landlords we recommend a master key system so you keep one key for yourself and change only the tenant cylinder at turnover. A single rekey is $25-$45; a full turnover rekey with three to five cylinders runs $95-$190. We can set you up on a turnover schedule and document every cylinder change.
Deltona’s GDC housing stock is unique, and the wrong advice about a lock is worse than no advice at all. We’ve been doing this since 2002, under a rule that does not bend: the price on the phone is the price on the invoice. We served a 1974 GDC-era rental on Howland Boulevard last month, converting the landlord’s worn Kwikset cylinders to a bump-resistant pin and tumbler setup in under an hour. The steel frame had swollen from summer rain, so our tech re-cut the strike plate mortise and adjusted the latch before testing the key control change on both doors. That’s what a Deltona lock job looks like.
Call (331) 310-8471 and you’ll get a live person, a firm price, and a written scope before anyone is dispatched. If it’s after hours, the same person answers. If you have a competitor’s estimate, bring it to us and we’ll review it at no charge. And if the work isn’t done right, we make it right under our 365-Day Done Right Promise.
Written by Daniel Novak, Owner at Novak Lock & Security, serving Deltona and the surrounding area since 2002.






