Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Lock Installation & Rekey Across Encanto
Lock installation and rekeying in Encanto homes isn’t a generic job. The neighborhood’s 1920s-1940s housing stock, concentrated in the Encanto-Palmcroft Historic District, brings mortise locks, skeleton keyways, and wood door frames that have survived a century of Phoenix heat. A rekey on a Spanish Colonial Revival bungalow is a different task than a rekey on a 2018 tract home in Mesa. We work those older systems daily. Novak Lock & Security quotes a firm price on the phone before dispatch, and that’s the price on the invoice, no exceptions. Call (331) 310-8471 and a live person answers, 24/7.
Why Novak Lock & Security Is Encanto’s Preferred Lock Installation & Rekey Company
Daniel Novak built this company in 2002 around one rule: the price quoted on the phone is the price the technician writes on the invoice. That rule, Haven Standard Clause 1, applies to every lock installation, rekey, and key duplication we perform in Encanto. We don’t dispatch a truck on a vague estimate and adjust the number at your door. You get a written scope, a flat per-lock price, and a photo record of the work before we leave.
Our technicians know Encanto’s housing stock. They know that a 1936 Tudor Revival on Encanto Boulevard may still have its original cast-iron mortise body, and they know what it takes to rekey that lock without destroying the faceplate. They know that Phoenix summers above 110°F cause wood door frames on these older homes to swell and pinch deadbolts, which means a rekey that ignores strike plate alignment is a rekey that’ll bind by July. That local knowledge isn’t decorative. It’s the difference between a lock that works for ten years and one that fails the first August you need it.
Every technician is background-checked and uniformed. Every visit ends with a written record, including photos of the hardware before and after. If something isn’t done right, the 365-Day Done Right Promise means we return and make it right. That’s the standard we’ve applied to the 60,000+ locks, keys, and systems we’ve installed or serviced since 2002.
Our Lock Installation & Rekey Services in Encanto
Our Lock Installation & Rekey team handles everything from a single deadbolt to a full restricted-key system across an estate. Here’s what we most often do in Encanto specifically.
Smart Lock Installation
Smart locks on Encanto’s historic doors require a plan. A modern smart deadbolt cannot drop into a 1920s mortise lock pocket without a conversion plate, and if that plate isn’t fitted to the original wood frame, the deadbolt won’t throw cleanly in summer when the frame expands. We install Schlage Encode, Baldwin Evolved, and other smart locks with proper mortise-to-modern conversion hardware, and we align the strike plate for Phoenix’s thermal cycle before we tighten a single screw.
Keyless Entry
Keyless entry systems for Encanto homes range from standalone keypad deadbolts to integrated access systems tied to an alarm or smart-home hub. We recommend options based on the door’s actual construction. A 3-inch thick front door with an existing multi-point lock needs a different approach than a standard 1¾-inch entry door. We’ll tell you which one you have and quote the work in writing.
Keypad Lock
Keypad locks are the most requested upgrade in Encanto’s historic district because they allow code access without altering the antique faceplate. We can retain your original exterior trim and install a keypad-driven cylinder behind it, preserving the home’s street-facing appearance while giving you code-based entry. Phoenix Historic Preservation staff respond well to that approach.
Biometric Lock
Fingerprint and biometric locks are feasible on Encanto homes, though we’re direct about the limitations: direct sun on a black metal lock face in July can affect the optical sensor’s read time. We install biometric hardware with shaded keypad housings where needed, and we always pair a biometric lock with a physical key override so you’re never locked out of a sensor failure.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Encanto
We’re factory-authorized on Baldwin, Mul-T-Lock, and Abloy hardware, among others. That matters for Encanto homeowners because restricted and patented key systems from Mul-T-Lock and Abloy cannot be duplicated at a hardware store kiosk. If you want a key that can’t be copied without your authorization, we can supply and key that system, and we can integrate it into existing mortise locks on historic doors. We also stock period-appropriate lock bodies and trim profiles for 1920s-1940s Encanto homes, which most supply catalogs don’t carry.
Common Lock Installation & Rekey Problems We See in Encanto Homes
- Modern smart locks installed into original mortise pockets without a conversion plate. The result is a deadbolt that shifts under load, grinds against the old strike plate, and fails to throw when the wood frame expands past 110°F. We correct these installations regularly, and we always check the strike plate alignment during any rekey on these doors.
- Rekeys using standard pin-and-tumbler pins in deeper mortise keyways. Original Encanto mortise locks have deeper keyways than modern cylinders. Standard pins are too short, so the key only partially engages and jams when the door swells in summer. We cut and pin mortise cylinders to the original keyway depth, not the modern default.
- Swapping visible antique faceplates for universal trim. On street-facing doors in the Encanto-Palmcroft Historic District, replacing an original lock faceplate with a new universal trim can trigger a stop-work order or a required restoration. We preserve the original faceplate and source period-correct replacement hardware when it’s genuinely beyond repair.
- Seized skeleton-key cylinders from decades of thermal cycling. Cast-iron lock bodies expand and contract with Phoenix heat, and original cylinders eventually seize or bind. We restore these locks non-destructively when possible, sourcing period-correct blanks and cutting them to match the existing wards.
One job stands out. On a Spanish Colonial Revival home in Encanto-Palmcroft, our crew serviced a 1930s cast-iron mortise lock whose original skeleton-key cylinder had seized from decades of thermal cycling. We sourced a period-correct replacement lock body and rekeyed the lock with a custom pin and tumbler configuration, preserving the original faceplate and restoring non-destructive entry via a new skeleton-key blank cut to match the existing wards. That’s the kind of work this neighborhood calls for, and it’s work we’ve done many times.
Pricing for Lock Installation & Rekey in Encanto, AZ
Lock rekeying in Encanto typically runs $18-$35 per cylinder, quoted in writing before we start. Smart lock installation on a standard prep door runs $85-$150 in labor, plus the lock itself. Mortise lock rekeys on historic doors run $35-$60 per cylinder due to the deeper keyway and hand-fitting required. Restricted key systems from Mul-T-Lock or Abloy run $12-$25 per key for the restricted blanks, with a system setup fee of $50-$100 depending on cylinder count. A full home rekey across six cylinders in Encanto typically lands between $108 and $210. These are firm quotes, not estimates we adjust at the door. The dispatcher quotes a price before anyone is dispatched, and that’s what you pay. No call-out surcharge added on arrival, no scope creep, just a written scope and a flat per-lock price. Call (331) 310-8471 for an exact quote. Estimates are free.
We Also Serve Cities Near Encanto
Novak Lock & Security serves Lock Installation & Rekey in Encanto and the surrounding metro area, including Phoenix, Mesa, Chandler, and Gilbert. Dispatch is coordinated from our Phoenix office, and crews serve Encanto locally with the same flat pricing and written scope on every job.
Serving Encanto, AZ - Our Local Coverage Area
We’re based in the Encanto area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Lock Installation & Rekey in Encanto
Yes. We rekey original mortise locks while preserving the exterior faceplate in virtually every case. The rekey happens inside the lock body, not on the visible trim. We cut mortise cylinders to the original keyway depth and pin them with the correct lengths, so the new key works smoothly and the faceplate stays untouched. The price is quoted before we start, and the faceplate is documented in the photo record we give you after the job. Call (331) 310-8471 for a firm quote on your specific lock.
Yes, with the right conversion hardware. A 3-inch thick door with a multi-point lock requires a mortise-compatible smart lock or a multi-point smart lock retrofit, not a standard smart deadbolt. We’ll assess the existing lock body, confirm the door thickness, and quote the correct hardware in writing. This is a scheduled job, not an emergency dispatch, so we provide a written scope and a flat per-lock price before we arrive. Call (331) 310-8471 to schedule an assessment.
Because the wood door frame swells in Phoenix heat, not just the lock. Encanto’s older homes have original wood frames that expand when temperatures exceed 110°F, shifting the strike plate out of alignment and pinching the deadbolt. A rekey only changes the pins inside the cylinder. It does not address frame movement. We re-align or replace the strike plate and check the frame clearance during any rekey on Encanto’s older homes. The fix is usually a 45-minute adjustment, quoted in writing before we start. Call (331) 310-8471 and describe the binding. We’ll tell you exactly what we think it is before dispatch.
Yes. A restricted keyway system can be built into original mortise locks without replacing the visible hardware. We install restricted cylinders from Mul-T-Lock or Abloy inside the existing mortise bodies, keeping the original faceplates intact. The new keys cannot be duplicated at a hardware kiosk or by any locksmith without your authorization. It’s a way to modernize security on a historic home without changing its character. The per-key cost and setup fee are quoted in writing before we order a single cylinder. Call (331) 310-8471 for specifics on your home.
Yes, in most cases. We can build a master key system into original mortise locks by reconfiguring the internal wards and cutting new skeleton-style blanks to match. The original faceplates and lock bodies stay in place. Each door gets its own key, and one master key opens them all. This is scheduled work with a written scope and a flat per-lock price, and we document every lock before and after with photos. The age and condition of each lock body determine what’s possible, so we’ll assess each door before we quote. Call (331) 310-8471 to set up a walkthrough.
Contact Novak Lock & Security in Encanto
If you need a rekey, a smart lock install, or a full restricted-key system on an Encanto historic home, call (331) 310-8471. A live person answers 24/7, quotes a firm price before anyone is dispatched, and that price is the price on the invoice. No call-out surcharge, no door-side adjustments, no vague estimates. Just a written scope and work done to The Haven Standard. Daniel Novak has run the company that way since 2002.
Written by Daniel Novak, Owner at Novak Lock & Security, serving Encanto and the Phoenix metro area since 2002.
Lock Installation & Rekey in Nearby Areas
