Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Lock Installation & Rekey Across Everett
Lock installation and rekeying in Everett typically costs $25-$45 per cylinder for rekeying and $95-$285 for full lock installation, depending on hardware grade and whether we’re matching an existing keyway or converting to a new system. Most jobs in Everett are completed same day, and every price is quoted in writing before a technician is dispatched. That’s the rule that has governed Novak Lock & Security since 2002: the number you hear on the phone with Daniel Novak’s team is the number on the invoice, period. Call (331) 310-8471 and you’ll get a live person, a firm price, and a scheduled window that actually holds.
We work throughout Everett every week, from the naval station neighborhoods near the waterfront up through Rucker Hill and out toward the Boeing perimeter. The housing here is different from Bellevue or Redmond. It’s older, it’s salt-worn, and it turns over faster because of Navy PCS cycles and Boeing contract shifts. We know what that means for the hardware on your doors, and we quote accordingly.
Why Novak Lock & Security Is Everett’s Preferred Lock Installation & Rekey Company
Everett homeowners call us because we name the exact price before anyone gets in a van. There’s no “technician will assess on site” ambiguity. Haven Standard Clause 1 states it plainly: the price on the phone is the price on the invoice. That rule was written when Daniel Novak founded the company in 2002 and it hasn’t bent once in the 60,000+ locks, keys, and systems we’ve installed or serviced since. Everett customers get the same treatment as everyone else, because the rule doesn’t have a city exception.
Every technician who arrives at an Everett address is background-checked and uniformed. When the job is done, you get a documented photo record of the work: the old cylinder, the new pins, the installed hardware, the finished strike plate. Not a courtesy. A procedure. Daniel Novak built the company around the idea that trust in this trade is something you can hand someone in writing.
We answer the phone 24/7. Live person. If you’re locked out at 2 a.m. in the Riverside neighborhood or a tenant just left a rental near the naval station with keys unreturned, you call (331) 310-8471 and a human picks up. No voicemail queue. No callback window. That matters more in Everett than most places, because PCS moves don’t happen on business hours.
Our Lock Installation & Rekey Services in Everett
Smart Lock Installation
Smart lock installation in Everett runs $145-$325, and we install Yale and Schlage smart deadbolts along with retrofit kits that adapt your existing mortise or cylindrical hardware. For older craftsman homes on Rucker Hill, we often recommend a smart lock that fits the existing mortise pocket rather than drilling new holes in a 1948 door that’s already shifted. The salt air matters here too: we spec marine-grade or sealed electronics where possible, and we’ll tell you honestly if a coastal exposure near Port Gardner Bay means you should skip a touchscreen model that’ll fail in two winters.
Keyless Entry
Keyless entry installation in Everett runs $175-$310 for a complete keypad deadbolt setup. Navy families in Lincoln Military Housing use these constantly during deployment cycles, because it’s easier to change a code than to rekey every time a spouse or parent arrives to help with the kids. We stock keypad hardware locally for Everett jobs and can typically install same day if you call before noon.
Keypad Lock
Keypad lock installation in Everett starts around $120 for basic Schlage or Kwikset keypad deadbolts and goes up from there for commercial-grade hardware. The northeast Everett neighborhoods near Boeing and the industrial corridor have a lot of garage entry doors and workshop access points where a keypad just makes more sense than issuing eight copies of a brass key. We’ll match the keypad to your existing keyway so you keep one key for emergencies and one code for daily use.
Biometric Lock
Biometric lock installation in Everett starts at $320 and goes up based on whether you need a standalone fingerprint deadbolt or a networked system with audit trails. These make the most sense for Boeing-area offices and home businesses where key control is an actual concern, not a convenience. We’ll show you the spec sheet before we quote so you know exactly what the reader tolerates, how many prints it stores, and whether it’s rated for exterior use in a marine climate. Some biometric units are not; we won’t install one where it’ll fail.
Key Duplication
Key duplication in Everett runs $3-$12 per key for standard brass keys, and $15-$45 for high-security or restricted blanks from Medeco and Mul-T-Lock. If you have Medeco or Mul-T-Lock cylinders, standard hardware-store duplication machines can’t cut your keys; the blanks are restricted and the cards are controlled. We’re factory-authorized for Medeco, Mul-T-Lock, Abloy, Baldwin, and Schlage, so your high-security keys come from the right channel with the right paperwork.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Everett
We install and rekey Medeco, Mul-T-Lock, Yale, and Schlage hardware daily in Everett, and we keep a rolling stock of common cylinders, tailpieces, and strike hardware in our Seattle-coordinated inventory so Everett jobs don’t stall waiting for a part to ship. For coastal properties near the Port Gardner waterfront, we’re comfortable with both Medeco and Mul-T-Lock high-security cylinders; the marine rating question comes down to what’s inside the cylinder, and we’ll explain exactly what we’re fitting and why before we order anything. If you bring us a competitor’s written estimate, Daniel Novak will review it at no charge and tell you in plain English whether it’s apples to apples. That’s the Free Second Opinion policy, and it applies to every Everett address we serve.
Common Lock Installation & Rekey Problems We See in Everett Homes
- Seized deadbolt pins from salt air near the bay. Homes within a few blocks of Port Gardner Bay get a constant bath of marine moisture, and over a decade or two the brass pins inside older deadbolts corrode until the key won’t slide in. We see this constantly on the naval station side of town, and the fix is usually a cylinder pull, a solvent clean, and new pins, not a whole new lock.
- Shifted door frames on 1910s-1950s bungalows. The older craftsman homes around Rucker Hill have had a century to settle, and we routinely find strike plates that are 1/8″ or more out of alignment. The lock bolt binds, the keyway takes undue stress, and eventually the tailpiece breaks. We fix the strike, not just the lock.
- Corroded padlocks on waterfront storage and boat-access gates. Standard brass padlocks pitted by marine air seize at the shackle, and when that happens, someone grabs bolt cutters. We fit marine-grade stainless or shrouded padlock bodies on coastal storage sheds and gate hardware so the lock doesn’t become the weak point in your security.
- High rekeying turnover in Navy and Boeing rental stock. When a Navy family gets PCS orders or a Boeing contractor rotates out, the landlord calls a locksmith. That means the same locks on the same Everett streets get rekeyed over and over, and if the previous tech used cheap pins or didn’t clean the cylinder, we inherit a degraded lock. We document the condition we find and the work we do, every time.
Pricing for Lock Installation & Rekey in Everett, WA
Here’s what you should expect to pay for lock work in Everett’s market, stated plainly.
| Service | Typical Everett Price Range |
|---|---|
| Rekey per cylinder | $25-$45 |
| Deadbolt installation (standard) | $95-$165 |
| Deadbolt installation (high-security Medeco/Mul-T-Lock) | $210-$285 |
| Smart lock installation | $145-$325 |
| Keypad lock installation | $120-$310 |
| Biometric lock installation | $320+ |
| Key duplication (standard / high-security) | $3-$12 / $15-$45 |
These are the ranges Daniel Novak’s dispatchers quote on the phone for Everett addresses. The price you’re quoted before dispatch is the price you pay when the work is done. No call-out surcharge added when the tech arrives, no “I’ll have to see it” repricing at the door. If you want an exact number for your specific lock and door configuration, call (331) 310-8471 and describe the hardware; we’ll give you a written number before anyone schedules anything.
We Also Serve Cities Near Everett
While this page is written for Everett, our Lock Installation & Rekey crews cover the surrounding market every week. We work in Kirkland, Redmond, Bellevue, and Seattle, with the same written-pricing rule and the same background-checked technicians. If you’re just outside the Everett city line and need lock work, call and we’ll tell you straight whether we serve your street. We’re also the team to call for Lock Installation & Rekey in Everett when you need someone who already knows the housing stock and the climate.
Serving Everett, WA - Our Local Coverage Area
We’re based in the Everett area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Lock Installation & Rekey in Everett
You should rekey on the day you take possession, not when it’s convenient. PCS moves concentrate turnover, and multiple previous tenants means multiple unknown key copies. A typical Lincoln Military Housing rekey runs $25-$45 per cylinder, and we do these on the Navy’s schedule, including same-week appointments when orders come down fast. Call (331) 310-8471 and we’ll quote the whole house in writing before we dispatch.
Yes, and it’s measurable. Marine air accelerates corrosion of brass pins, springs, and tailpieces inside deadbolt cylinders; that’s why a 1960s lock in Monroe might still turn smoothly while the same vintage lock on a waterfront Everett home feels like it’s grinding on sand. We clean, repin, or replace cylinders as needed, and on coastal properties we’ll recommend marine-grade or high-security cylinders with better internal corrosion resistance.
Usually yes, and that’s the right call if the lock body is solid. We recently rekeyed a 1940s craftsman on Rucker Avenue after a Navy family received PCS orders from Lincoln Military Housing. The original mortise lock had a seized cylinder from decades of salt air, so our tech pulled the cylinder, cleaned the corrosion, and rekeyed the pin and tumbler stack to new keys in under an hour. No replacement needed, and the owner kept a beautiful original mortise lock that now actually works.
The first step is fixing the corroded cylinder, not bolting a smart motor onto it. A smart lock on a seized deadbolt will chew through batteries and eventually strip the torque blade. We typically pull the cylinder, clean it or replace it, then install a Yale or Schlage smart deadbolt rated for exterior use. On coastal Everett homes, we avoid touchscreen models prone to moisture failure and lean toward physical-button or keypad designs that tolerate wet winters.
Yes, and it’s a different job than a home rekey. Boeing’s supplier network around the Everett plant uses master-key and keyed-alike systems for access control across offices, tool rooms, and secured storage. These are surveyed and scheduled jobs, not dispatched calls. We provide a written scope and a flat per-lock price before any work begins, and we handle the key control documentation that comes with restricted systems from Medeco and Mul-T-Lock. If you run a supplier facility in Everett and need a master-key conversion, call (331) 310-8471 and ask for Daniel Novak.
Written by Daniel Novak, Owner at Novak Lock & Security, serving Everett since 2002.