Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Lock Installation & Rekey Across Midwest City
Lock installation and rekeying in Midwest City runs $65-$185 per lock for standard residential hardware, with full rekeys of an average 3-lock home typically landing between $180-$320. We quote that price in writing before anyone gets in a van, and Haven Standard Clause 1 says it plainly: the price on the phone is the price on the invoice. If you live off Air Depot, in Original Town, or out near the Tinker gates, our techs know your door hardware before they touch it. Call (331) 310-8471 and you’ll get a firm number, not a range that changes when we arrive.
Why Novak Lock & Security Is Midwest City’s Preferred Lock Installation & Rekey Company
Most Midwest City homes were built fast, between 1942 and the early 1960s, to house Tinker Air Force Base workers. That means the door hardware on those homes was installed fast too. We’ve pulled worn 1950s mortise locks off ranch houses near Air Depot Boulevard that no modern pin-and-tumbler kit can rekey, and we’ve rebuilt key control on doors with frames so warped from Oklahoma temperature swings that a standard deadbolt won’t align without a new strike plate. You can learn this stuff from YouTube, or you can hire someone who has done it 60,000 times since 2002.
Midwest City customers call us because we show up with a written scope and leave a documented photo record of what we did, on every visit, no exceptions. That’s The Haven Standard, the quality framework Daniel Novak has run the company under since 2002. Our techs are background-checked and uniformed. The dispatcher who answers your call is a live person, 24/7, not a voicemail tree. And any work we do – install, rekey, key duplication, or a 2 a.m. lockout – is covered by the 365-Day Done Right Promise: if it isn’t done right, we make it right.
Our Lock Installation & Rekey Services in Midwest City
Smart Lock Installation
Smart locks in Midwest City get installed on doors built before smart locks existed. That’s the actual job. A 1950s ranch near Atkinson Plaza often has a door slab that’s drifted out of square over 70 years, and a smart lock’s bolt has tighter tolerances than an old Kwikset deadbolt. We shim, plane, or adjust so the bolt travels clean, then set up your app and user codes. You get a lock that actually locks every time, not one that says “jammed” in your phone at 10 p.m.
Keyless Entry
Keyless entry makes particular sense in Midwest City, where military renters cycle through houses every 2-3 years on PCS orders. A landlord can issue a fresh code to each tenant and delete it at turnover without chasing key copies. We install keyless systems from Schlage and Yale (we’re factory-authorized on both), and we orient the keypad for right-hand and left-hand door swings so the deadbolt doesn’t bind on the first day of an Oklahoma summer.
Keypad Lock
Keypad locks are the most-requested upgrade we install in Midwest City’s older neighborhoods. On a mid-century door with a warped frame, we don’t just drill a second hole and hope the bolt lands – we set the strike plate into fresh wood, shimmed to the frame’s actual angle, so the code works from day one. Expect a keypad lock install in Midwest City to run $180-$340 including the hardware, and you’ll get the written price before we start.
Biometric Lock
Fingerprint locks need a stable, square door to function reliably, because the motorized bolt can’t fight a misaligned strike plate the way a manual bolt can. On older Midwest City homes, we assess the frame before recommending biometric hardware, and we’ll tell you if your door is a better fit for a keypad or keyless system instead. Our job is to give you a lock that works for the life of the door, not sell you the most expensive cylinder on the wall.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Midwest City
We’re factory-authorized on Medeco, Mul-T-Lock, Baldwin, and Schlage, and we stock the pins, cylinders, and tailpieces that Midwest City’s older homes actually need. That matters when you have a Baldwin mortise cylinder on a 1958 rancher near the base and you don’t want to wait a week for a part. We also carry Yale smart hardware for keyless upgrades. When we install a high-security Medeco or Mul-T-Lock cylinder, the pricing is in writing before we turn a screw, same as every other job we do.
Common Lock Installation & Rekey Problems We See in Midwest City Homes
- Warped mid-century door frames from seasonal swelling. Oklahoma’s freeze-thaw winters and triple-digit summers make the old wooden frames on Midwest City ranch homes expand and contract. Deadbolts throw out of alignment with strike plates, and lockout calls spike in July-August and again after hard freezes. We realign the plate and shim the hinge so the bolt travels clean.
- Obsolete mortise lock cylinders from the 1940s-1960s. A large share of Midwest City’s core housing stock still has original mortise locksets. Those cylinders can’t be rekeyed with modern pin-and-tumbler kits. We’ll inspect yours and tell you straight: rekey if it’s viable, replace if it isn’t.
- Landlord-deferred hardware on PCS rental turnover. Military tenants move out every 2-3 years, keys get lost, tumblers wear out, and landlords often don’t upgrade hardware between tenancies. We handle non-destructive entry and same-day rekey so a new tenant has fresh key control the day they sign.
- Drilled-out deadbolts from previous cheap installs. Handyman and big-box-installed deadbolts on old doors often have off-center holes that leave the bolt half-engaged. We fix the bore, replace the hardware, and set the strike plate properly. Then we leave you a photo record of what we did.
Pricing for Lock Installation & Rekey in Midwest City, OK
Here are the ranges we quote in Midwest City, in writing, before any work starts:
- Standard rekey (pin-and-tumbler): $65-$95 per cylinder, $180-$280 for a typical 3-lock home
- Mortise lock rekey (1940s-1960s homes): $90-$140 per lock, if the original cylinder is serviceable
- Deadbolt replacement (ANSI Grade 1): $120-$210 installed, hardware included
- Keyless entry or keypad lock installation: $180-$340, hardware included
- Biometric lock installation: $280-$450, hardware included, after frame assessment
- Key duplication: $3-$8 for standard blanks, $15-$40 for restricted or high-security keys where authorized by the key owner
Full price is quoted on the phone before anyone is dispatched. No call-out surcharge gets added on arrival. No bait price that triples at the door. If you have a written estimate from another lock company, bring it to us – we’ll review it at no charge under our Free Second Opinion policy. Call (331) 310-8471 for an exact quote on your specific hardware.
We Also Serve Cities Near Midwest City
Novak Lock & Security provides Lock Installation & Rekey throughout the Oklahoma City metro, including Norman, Edmond, and Moore. We also serve Midwest City as our local base for the Tinker corridor. Crews are dispatched from our Oklahoma City office, so response times stay consistent across the east side of the metro.
Serving Midwest City, OK - Our Local Coverage Area
We’re based in the Midwest City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Lock Installation & Rekey in Midwest City
It depends on the cylinder’s condition and the lock body’s integrity, and we’ll tell you which is which after looking at it. Many 1950s mortise cylinders in Midwest City can be rekeyed if the internal pins and springs are intact and the lock body isn’t seized. But plenty of them are too worn, or the cylinder format predates modern pin kits, and rekeying would just produce a lock that fails in a season. In that case we recommend a full replacement – typically a Grade 1 deadbolt with a new strike plate. We’ll show you the old cylinder and explain what we found before we do anything. Call (331) 310-8471 to schedule an inspection.
PCS season peaks June through August, and Midwest City rekeying volume rises with it, because hundreds of military families move in and out on 2-3 year assignment cycles. Same-day service gets booked faster during those months, especially for rental turnovers near the base gates. We staff extra crews through the summer to keep response times tight. If you’re a landlord with multiple PCS turnovers to handle, call us in May and we’ll set a schedule. For an exact time slot, call (331) 310-8471.
In most cases, yes. The key is setting the strike plate into the frame at the frame’s actual angle, not the angle the door was built at 60 years ago. We shim the plate, sometimes route a fresh pocket, and adjust the hinges so the latch lands clean. The door stays. If the warp is severe enough that the door slab itself needs straightening, we’ll tell you that before we quote the install. A keypad lock install in Midwest City typically runs $180-$340 with hardware. Call (331) 310-8471 for a written quote.
Rekeying is almost always cheaper – $65-$95 per cylinder versus $120-$210 for a new deadbolt – and it’s the right move when the existing lock is serviceable. For PCS turnovers, rekeying restores key control immediately, so any old keys a departed tenant made won’t turn the cylinder. If the lock is worn or an old mortise unit is failing, replacement makes more economic sense than rekeying it twice a year. We’ll give you a written recommendation with the exact numbers. Call (331) 310-8471 for a PCS turnover audit.
Rekey every exterior cylinder to a new key on the day the tenant leaves, and then issue new keys to the tenant on the day they arrive. The gap between those events is when keys walk away. For landlords with multiple properties near Tinker, we can key all units to a master key system so you carry one key and each tenant’s key only operates their own door. That’s a Mul-T-Lock or Medeco system, quoted in writing before we cut a single key. Call (331) 310-8471 to set up a turnover schedule.
Know Your Lock Before You Call
Midwest City’s lock hardware tells a story. Homes built from 1942 to 1960 were framed and hung in a hurry, and many still carry mortise locks that newer suburbs never had. On a ranch home near Air Depot Boulevard, our crew pulled a worn 1950s mortise lock that no longer keyed reliably. Rather than force a modern deadbolt into a warped original door frame, we rekeyed the working parts and installed an ANSI Grade 1 deadbolt with a new strike plate realigned to the frame – keeping the door’s period profile while restoring proper key control. The homeowner got a lock that works with one key, and a photo record of exactly what was changed.
That’s the difference between a locksmith who knows Midwest City and one who just drives through it. We know which vintage cylinders can be saved and which ones are done. We know what a July heat spike does to a 1958 door frame. And we know the Tinker PCS cycle drives this market’s rekeying demand in a way no real estate trend ever will. Call (331) 310-8471 for a free estimate, quoted in writing before we start.
Written by Daniel Novak, Owner at Novak Lock & Security, serving Midwest City and the Oklahoma City metro since 2002.
Lock Installation & Rekey in Nearby Areas