Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Fast, Reliable Lock Installation & Rekey Across Revere
Lock installation and rekeying in Revere costs $85-$240 per lock, quoted in writing before our technician ever gets in the van. We serve every neighborhood from Beachmont to Broadway, and we answer the phone with a live person 24 hours a day. The salt air off Revere Beach destroys lock hardware faster than anything inland, which means the work we do here is different from Chelsea or Malden. You need hardware that survives ocean exposure, not just hardware that fits. Call (331) 310-8471 and you’ll have a firm price before anyone is dispatched. That’s Haven Standard Clause 1, and it has been the rule since 2002.
Our Lock Installation & Rekey team knows what Revere’s coastal air does to a deadbolt in two winters. We stock the parts that actually hold up here, because a rekey that works in Everett fails in Revere unless the cylinder and strike are chosen for salt exposure.
Why Novak Lock & Security Is Revere‘s Preferred Lock Installation & Rekey Company
Novak Lock & Security has been installing and rekeying locks since 2002, and our work in Revere follows one non-negotiable rule: the dispatcher names a written price on the phone, and the technician is contractually prohibited from changing it at the door. No bait-and-switch. No call-out surcharge added on arrival. Daniel Novak built the company around that single principle, and every one of our 60,000+ completed jobs has started with a written quote and ended with a documented photo record left with the customer.
We know Revere’s housing stock the way only repeated jobs teach. The triple-deckers off Shirley Avenue, the older singles near Broadway, the multifamily buildings feeding the Blue Line at Beachmont and Wonderland: all of them show the same salt-corrosion patterns in original mortise locks and aging knob-set hardware. A background-checked, uniformed technician arrives when we say, does the work to The Haven Standard, and leaves you with written documentation of exactly what was done.
Our reputation in Revere comes from doing the unglamorous thing correctly. We name the part, we name the price, and we write down what we found.
Our Lock Installation & Rekey Services in Revere
Smart Lock Installation
Smart lock installation in Revere typically runs $180-$380 per lock, including the lock, labor, and programming. The salt air near the beach demands external keypads or fingerprint readers rated for outdoor exposure; cheaper models with exposed contacts corrode within a season. We install Yale, Schlage, and other brands with sealed housings and recommend stainless or marine-grade strike hardware on any door within a mile of Ocean Avenue. The price is written before the visit, and every smart lock we install is programmed, tested, and backed by the 365-Day Done Right Promise.
Keyless Entry & Keypad Lock Installation
A keypad deadbolt in Revere runs $160-$340 installed. If you’re managing a rental unit near Wonderland or Beachmont, a keypad means you never rekey between tenants again: you delete the old code and issue a new one. We install keyless entry hardware on wood and hollow metal doors, including the swollen frames common in older triple-deckers. The keypad is coded, the deadbolt is tested for full throw, and you watch it work before we leave.
Biometric Lock Installation
Biometric locks in Revere cost $280-$500, depending on whether you choose fingerprint-only or fingerprint-plus-keypad. These are the right call for beach-facing properties where key duplication is a constant headache and where landlords want a documented access trail. Salt air is harder on biometric readers than on standard keypads, so we specify models with sealed sensors and hardened finishes. Same written price, same photo record, same warranty.
Electronic Lock Installation
Electronic locks range from $140 for a basic keypad deadbolt to $420 for a Wi-Fi-connected deadbolt with remote access. If you’re in one of Revere’s older multifamily buildings with original mortise locks, we can often retrofit an electronic deadbolt without replacing the entire door. The hardware is spec’d for coastal exposure, the strike is mounted straight, and the firmware is updated before we hand you the packaging.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Revere
We carry and install Medeco, Mul-T-Lock, Baldwin, and Schlage, from entry-grade cylinders to high-security deadbolts that cannot be picked or bumped by standard tools. For Revere customers, that matters because cheap big-box hardware simply doesn’t survive two winters within a half-mile of the beach. Medeco and Mul-T-Lock cylinders use hardened internal pins and sealed keyways that resist salt fouling; Baldwin and Schlage offer marine-grade finishes on their higher-tier deadbolts. We stock these parts locally so a rekey or replacement isn’t waiting on a warehouse in another state.
Common Lock Installation & Rekey Problems We See in Revere Homes
- Salt-seized cylinders. The pin and tumbler mechanism inside a standard Kwikset or Schlage cylinder rusts fast in ocean air. The key won’t turn, and the landlord calls us convinced someone tampered with the lock. It’s almost always corrosion. We replace the cylinder with a sealed, stainless-pinned equivalent and cut fresh keys.
- Rusted strike plates and deadbolt internals. By the second winter, the strike plate on a beach-facing door is pitted and the deadbolt’s internal tailpiece is binding. During a landlord rekey, the whole deadbolt often has to come out because a simple rekey wouldn’t address the underlying rust. We quote the replacement price in writing before starting.
- Warped frames in flood-zone streets. Low-lying streets near the marshlands bordering Saugus and the FEMA-designated zones by Revere Beach see periodic inundation that swells wooden door frames. A newly installed deadbolt throws only halfway because the frame has moved. We straighten or mortise the strike and reposition the latch so the bolt seats fully.
- High-turnover rekeying. Revere has one of the highest renter-turnover rates on the North Shore. Landlords along the Blue Line corridors need a rekey between every tenant, and original mortise locks in pre-war triple-deckers complicate the job. We rekey the existing cylinder when the hardware is sound, and recommend a deadbolt replacement when it isn’t.
Pricing for Lock Installation & Rekey in Revere, MA
A straightforward rekey in Revere runs $75-$150 for the first cylinder and $20-$35 per additional cylinder keyed alike. Deadbolt installation ranges from $120-$240 depending on grade; smart lock installation runs $180-$380 as noted above. Salt-corrosion replacement work, where the cylinder and strike both have to come out, typically lands between $220 and $300 per door. The price we name on the phone is the price on the invoice. Labor, hardware, travel to Revere, and documentation are all included in that number. We never add a call-out surcharge at the door. If you have a written estimate from another shop, Daniel Novak’s team will review it free of charge.
Call (331) 310-8471 and describe what you’re seeing. The dispatcher names the price, and the technician arrives with that price already on the work order.
We Also Serve Cities Near Revere
While this page is focused on Lock Installation & Rekey in Revere, our crews regularly cover Chelsea, Everett, Malden, and Lynn. For those cities, the inland hardware standards are different: a lock that survives ten years in Malden may not survive three in Revere Beach air. Wherever we go, the written-price rule and the photo record travel with us.
Serving Revere, MA - Our Local Coverage Area
We’re based in the Revere area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Lock Installation & Rekey in Revere
Salt-laden air off the Atlantic penetrates the keyway and corrodes the brass pins inside the cylinder. The fix is a sealed cylinder with stainless internal components, plus annual graphite lubrication. We can rekey a seized cylinder if the housing is intact, but once the pins are pitted, replacement is the honest answer. Call (331) 310-8471 for a written quote before we start.
It depends on what corrosion has reached. A pitted faceplate can often be cleaned and rekeyed; corroded internal pins or a rusted tailpiece mean replacement. The difference is typically $75-$150 for a rekey versus $220-$300 for hardware replacement. We’ll inspect the lock and give you a written price on the phone before dispatch. Estimates are free.
We rekey the existing mortise cylinder when the body is sound, which covers most pre-war hardware in Revere. If the cylinder is seized or the set screw is rusted, we replace the cylinder and keep the original mortise body. Each job is priced in writing, and the new tenant gets fresh keys while the landlord retains the master if one exists.
Yes. We install smart locks rated for outdoor salt exposure, typically $200-$380 per door, with sealed keypads and stainless strike hardware. For rentals, a keypad deadbolt eliminates rekeying between tenants: delete the old code and issue a new one. Every installation includes programming, testing, and a documented photo record. Call (331) 310-8471 for an exact written quote.
Yes, and it’s one of the most common failures we see in Revere’s flood-zone streets. Water swells the wood frame, and the strike plate no longer lines up with the bolt. We realign the strike, mortise the frame where needed, and sometimes replace a warped door edge. This is a door-frame repair as much as a lock repair, and we’ll quote it in writing before starting. Call (331) 310-8471 with your cross streets and we’ll give you a firm number.
Salt Air and Lock Hardware: What Actually Happens in Revere
Two winters. That’s how long a standard Kwikset deadbolt lasts on a side street just off Ocean Avenue before the cylinder seizes so completely the key won’t turn. Our Lock Installation & Rekey crew rekeyed a triple-decker on Bradstreet Avenue near Revere Beach where the tenant’s Kwikset deadbolt had corroded exactly like that. We replaced the seized pin and tumbler cylinder with a Schlage B560 deadbolt, switched the strike plate to stainless, cut two new keys, and recommended annual graphite lubrication. The old hardware went in the bin; the new deadbolt will outlast several more winters.
In Chelsea and Malden, a lock can work for decades. In Revere, the salt air speeds every failure mode: cylinder seizure, strike-plate rust, and deadbolt internals that bind within 18 months. That’s the difference between a $75 rekey and a $300 replacement, and it’s the first thing any locksmith working Revere should tell you. If your lock still works, a rekey makes sense. If the key sticks or the bolt grinds, replacing the cylinder now costs less than an emergency extraction later.
Contact Novak Lock & Security in Revere
For lock installation, rekeying, or a second opinion on any written estimate, call (331) 310-8471. A live person answers around the clock. You’ll get a firm written price before dispatch, a background-checked uniformed technician, and a photo record of the completed work. Daniel Novak’s 365-Day Done Right Promise applies to every job in Revere, from Beachmont to Broadway. If it’s not done right, we make it right.
Written by Daniel Novak, Owner at Novak Lock & Security, serving Revere since 2002.