Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Locksmith in Fishers, IN
Most locksmith work in Fishers is rekeying and smart-lock installation on homes built after 1995, because this city has grown from roughly 7,500 residents in 2000 to well over 100,000 today. The dominant hardware is builder-grade Kwikset and Schlage handlesets in planned subdivisions like Saxony, Sandstone Lakes, and the Fall Creek corridor. Homeowners here rarely deal with antique locks or mortise locksets. They deal with deadbolts thrown out of alignment by freeze-thaw frame shift and locks that need to be rekeyed the week the moving truck pulls away. Call (331) 310-8471 for a firm price before anyone is dispatched.
Why Fishers Homes Are Different
Fishers residential stock is almost entirely 1990s through present construction, concentrated in large master-planned communities. That means a Fishers locksmith rarely encounters pre-1980 hardware. No knob-only entry sets from the Eisenhower era. No mortise locks that need custom fabrication. The work here is builder-grade Kwikset SmartKey cylinders, Schlage B60 deadbolts, and the occasional Baldwin or Mul-T-Lock upgrade spec’d by a homeowner who wants something better than what the production builder installed.
The freeze-thaw cycle in Hamilton County creates a specific recurring late-winter call. January lows dip into the single digits, then warm spells arrive fast. Engineered-lumber door frames in 1990s and 2000s tract construction shift and rack under those temperature swings. The result: deadbolts that no longer line up with the strike plate, doors that need a shoulder to close, and strikes that need to be adjusted or replaced. Exterior lock de-icing is another Fishers winter staple that a locksmith in an older housing market would almost never touch.
The newer subdivisions from production builders like Pulte and M/I Homes increasingly include pre-wired smart-lock rough-ins. That means a lot of our Fishers work is swap-and-program: remove the builder-grade cylinder, install a smart lock that actually integrates with the homeowner’s phone, and set up the mechanical key override correctly.
And then there are the HOA gates. Many of Fishers’s larger communities use vehicle-activated or keypad-entry gates managed by third-party access control vendors. When those systems age out or a board decides to add resident fob capability, the work lands with a locksmith who understands gate hardware, not just door hardware. It is a service tier most Indianapolis-proper locksmiths rarely encounter.
Our Main Fishers Services
Two services dominate our Fishers call volume: lock installation and rekey, driven by the city’s relentless home-sale churn, and emergency response, driven by the same thing plus the occasional winter deadbolt failure.
Lock Installation & Rekey in Fishers
Fishers sees a constant flow of new residents closing on homes in HOA communities, and that means rekeys within days of move-in. The builder-grade Kwikset SmartKey cylinders on newer homes can be rekeyed quickly, but many homeowners prefer to step up to a Schlage or Baldwin deadbolt at the same time. We quote a firm per-cylinder price on the phone, and the technician is not permitted to change it at the door. Haven Standard Clause 1 is the rule on every job. Read the full breakdown on Lock Installation & Rekey in Fishers.

Emergency Locksmith in Fishers
Lockouts happen after a closing, after a late work shift, and in February when a deadbolt seizes in a shifted frame. We answer the phone with a live person 24 hours a day, and the dispatcher gives you a firm price before a tech is sent. When the technician arrives in Fishers, the price on the invoice is the price you were quoted. That is not a promise; it is procedure, and it has been since 2002. Details are on Emergency Locksmith in Fishers.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Residential Locksmith in Fishers

Residential locksmith work in Fishers tracks the housing stock: 1990s to present, builder-grade hardware, and a steady drumbeat of new move-ins. The most common job is a full-home rekey the week a buyer closes, followed by deadbolt replacement when winter frame shift throws the original hardware out of tolerance. Novak Lock & Security has installed or serviced over 60,000 locks, keys, and systems since 2002, all under Residential Locksmith practices and pricing that starts with a written quote before any work begins.
Lock Rekey
Signs you need it
You just closed on a home in Fishers, you have given out keys that have not all come back, or you cannot say with certainty who holds a copy of your current key.
What it costs in Fishers
Lock rekey in Fishers typically runs $65 to $180 per cylinder depending on whether it is a standard pin-and-tumbler or a Kwikset SmartKey cylinder, quoted in writing before we start.
How we do it
We disassemble the cylinder, swap the pins to a new key configuration, verify the old keys no longer operate the lock, and leave a documented photo record of the completed work.
Deadbolt Installation
Signs you need it
Your deadbolt no longer seats fully without lifting or pulling the door, or you are still relying on the single-cylinder Grade 3 unit the builder installed in 2005.
What it costs in Fishers
Deadbolt installation in Fishers typically runs $95 to $220 per deadbolt for standard Schlage or Kwikset units, including boring if the door was not pre-drilled, with the price fixed before dispatch.
How we do it
We inspect the existing door prep, bore or expand to spec, install and align the deadbolt, adjust the strike for the frame’s current position, and test operation with the door closed under normal pressure.
Residential Lockout
Signs you need it
Your door is locked, your keys are on the other side of it, and no one else with a key can get to you in the next hour.
What it costs in Fishers
Residential lockout in Fishers typically runs $75 to $160 depending on whether we can rake the cylinder or need to shim or bypass the latch, and the phone quote is the invoice price.
How we do it
We arrive, identify the least invasive entry method for your specific lock and door, open without damaging the frame when possible, and document the job with photos.
What Residential Locksmith Costs in Fishers
| Item | Typical range in Fishers |
|---|---|
| Lock rekey (per cylinder) | $65 - $180 |
| Deadbolt installation (per unit) | $95 - $220 |
| Residential lockout | $75 - $160 |
How fast can you get to a home in Fishers?
Most Fishers residential calls are reached within 30 to 45 minutes depending on time of day and traffic on 116th Street or I-69. The dispatcher commits to a window when you call, and the price is fixed at that point.
Do you rekey smart locks in Fishers?
Yes. Many newer homes in Saxony and Sandstone Lakes have pre-wired smart-lock rough-ins, and we rekey the mechanical override cylinder, reprogram user codes, and confirm the app integration before we leave. Call (331) 310-8471 for a firm quote.
Commercial Locksmith in Fishers

Commercial locksmith work in Fishers is split between the 96th Street and I-69 business corridor and the retail and office pads tucked into the larger planned developments. The work is less about legacy hardware and more about access control, master key systems, and panic bar compliance on buildings that went up in the last twenty years. Our Commercial Locksmith work follows one rule: written scope, flat per-lock price, and no dispatch-time billing surprises.
Access Control
Signs you need it
You are still cutting physical keys for every new hire while your building already has network wiring in every doorway, or your HOA gate is on a vendor system that no one on the board can explain.
What it costs in Fishers
Access control in Fishers typically runs $250 to $600 per door for basic keypad or fob systems, and $1,200 to $3,500 per door for full card-reader integrations, quoted in writing before we start.
How we do it
We survey the existing door hardware and wiring, provide a written scope with a flat per-door price, install the system, and train your staff on user management before we hand over documentation.
Master Key System
Signs you need it
Your manager carries a ring that opens every door in the building, and your staff each carry keys that open slightly different sets of the same doors.
What it costs in Fishers
Master key systems in Fishers typically run $20 to $45 per cylinder for pinning on top of the per-lock hardware cost, with the entire system priced in writing before any cylinder is touched.
How we do it
We map the door hierarchy, pin each cylinder to its intended level, issue keys per the written key schedule you approve, and leave you a record of every cylinder and every key cut.
What Commercial Locksmith Costs in Fishers
| Item | Typical range in Fishers |
|---|---|
| Access control (keypad/fob, per door) | $250 - $600 |
| Access control (card reader, per door) | $1,200 - $3,500 |
| Master key system (per cylinder pinning) | $20 - $45 |
Are you licensed for commercial work in Fishers?
Yes. Novak Lock & Security is state-licensed and insured and bonded, and every technician is background-checked and uniformed. All commercial work is performed to The Haven Standard and documented with a photo record at completion.
Do you handle the HOA gate systems in Fishers?
Yes. We work on vehicle-activated and keypad-entry community gates in Fishers subdivisions, including upgrades to resident fob systems. We schedule those as surveyed work, not dispatched calls. Call (331) 310-8471 for a written proposal.
Automotive Locksmith in Fishers

Fishers is a two-car household city with a lot of transponder keys, push-button starts, and fobs that die in a driveway on a single-digit January morning. Most automotive locksmith work here is car lockout and key fob replacement or programming on vehicles that are less than fifteen years old. Our Automotive Locksmith work is priced on the phone and the technician carries the equipment to cut and program on-site, not tow your car anywhere.
Car Lockout
Signs you need it
Your keys are on the driver’s seat, in the trunk, or in the ignition, and all four doors are locked with the fob still inside the vehicle.
What it costs in Fishers
Car lockout in Fishers typically runs $60 to $160 depending on whether we need air-wedge tools, a long-reach tool, or a lasso for a vertical lock button, quoted before dispatch.
How we do it
We use air wedges and long-reach tools to open the door without damaging the weatherstripping or paint, then verify the key or fob is functional before we leave.
Key Fob Programming
Signs you need it
Your fob stopped unlocking the door, your push-button start says “key not detected,” or you bought a used fob online and it will not pair to the vehicle.
What it costs in Fishers
Key fob programming in Fishers typically runs $75 to $250 per fob depending on make, model, and whether the vehicle requires dealer-level diagnostic equipment, priced in writing before we start.
How we do it
We connect to the vehicle’s onboard diagnostic port, program the fob to the immobilizer, test every function from lock to start, and leave you a written record of the programming.
What Automotive Locksmith Costs in Fishers
| Item | Typical range in Fishers |
|---|---|
| Car lockout | $60 - $160 |
| Key fob programming (per fob) | $75 - $250 |
| Car key replacement (basic, without chip) | $85 - $180 |
Do you cut keys on-site in Fishers or do I have to come to a shop?
We come to you anywhere in Fishers. Our technicians carry key cutting and programming equipment in the van, so a car key replacement or fob program is done in your driveway or office lot, not in a shop.
Can you program a key for a push-button start car?
Yes. We handle transponder keys, push-button start fobs, and proximity smart keys for most makes and models. The range depends on the vehicle’s year and immobilizer type, and the price is quoted before we start. Call (331) 310-8471 for a firm quote.
Brands We Service in Fishers

We carry parts and cylinders for Kwikset and Schlage as the Fishers baseline, and we are factory-authorized for Medeco, Mul-T-Lock, Abloy, and Baldwin when a homeowner or commercial client wants high-security cylinders that cannot be picked or bumped by standard tools. Turnaround on standard parts is same-day from our stocked inventory; special-order Abloy or Medeco cylinders are usually in within a few business days. See our brands for the full list and capabilities.
Pricing for Locksmith in Fishers, IN
| Service | Typical range in Fishers |
|---|---|
| Lock rekey (per cylinder) | $65 - $180 |
| Deadbolt installation (per unit) | $95 - $220 |
| Residential lockout | $75 - $160 |
| Window lock installation | $35 - $90 |
| Commercial lockout | $95 - $220 |
| High security lock installation (per door) | $180 - $400 |
| Panic bar installation | $450 - $1,200 |
| Access control (keypad/fob, per door) | $250 - $600 |
| Car key replacement (basic, without chip) | $85 - $180 |
| Transponder key programming | $120 - $290 |
| Ignition repair | $140 - $350 |
| Master key system (per cylinder pinning) | $20 - $45 |
What pushes a Fishers price up is access: a third-floor apartment off 116th Street with a parking garage, an HOA gate that requires an escort, or a vehicle with a dealer-locked immobilizer that takes longer to program. What does not change is the price after the phone call. The dispatcher quotes a firm figure, and the technician is not permitted to alter it when they arrive. No call-out surcharge, no arrival fee tacked on, no parts markup invented on the doorstep. Haven Standard Clause 1 has governed every Novak Lock & Security job since 2002.
Neighborhoods We Serve in Fishers

We work throughout Fishers, from the Fall Creek corridor and Saxony on the east side to Sandstone Lakes and the 96th Street business corridor on the west. Response time for most residential and commercial calls is 30 to 45 minutes, assuming normal traffic on 116th Street or I-69.
- Saxony
- Sandstone Lakes
- Fall Creek corridor
- Brittany Chase
- Sunblest
Service Area - Cities Near Fishers
Novak Lock & Security serves Fishers and the surrounding Hamilton County communities. We regularly work in Noblesville, IN to the north, Carmel, IN to the west, and south into Indianapolis, IN along the I-69 corridor. We also route crews to Westfield, NJ for project billing clients with ties to both metros. Dispatch is coordinated from the brand’s Indianapolis office; crews serve Fishers locally.
Serving Fishers, IN - Our Local Coverage Area

We’re based in the Fishers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Locksmith in Fishers
No. Rekeying, deadbolt replacement, and lock installation do not require a city permit in Fishers. The relevant constraint is HOA approval for hardware changes to common areas or gate systems, and we verify that before starting any HOA-adjacent work.
Yes. We schedule same-week and same-day rekeys for new move-ins throughout Fishers. The dispatcher confirms a time window and a firm per-cylinder price when you call, and the technician arrives with the parts needed for standard Kwikset and Schlage hardware.
Yes. Haven Standard Clause 1 states that the price on the phone is the price on the invoice. No technician is permitted to change it at the door. Call (331) 310-8471 for a firm quote, and if you have a written estimate from another locksmith, bring it for a free second opinion.
What happens when you call
- 1A real person answersNo phone trees - talk to a local locksmith pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fishers Customers Say
"Rekeyed the whole house after we bought it. He showed me the old pins and explained how many keys had likely been cut over the years."
- Omar J."Honest. Told me the existing deadbolt was good quality and only needed the strike plate reinforcing."
- Sal V."Fast, polite, and carried identification without being asked. Would use again."
- Grant W.






