Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Lock Installation & Rekey in Fishers: What to Expect and What It Costs
Lock installation and rekeying in Fishers typically runs $20-$35 per cylinder for a standard Kwikset or Schlage rekey, and $150-$450 for a complete smart lock or deadbolt installation, hardware included. Most jobs are completed the same day, and the price we quote on the phone at (331) 310-8471 is the price on the invoice. That’s not a slogan. It’s Haven Standard Clause 1, and it has been the rule here since 2002.
Fishers is a specific kind of market, and it shapes almost every call we take. The housing stock is nearly all post-1990 tract construction. Builder-grade Kwikset SmartKey and Schlage handlesets are the dominant hardware. You’re not dealing with 80-year-old mortise locks and warped original doors the way a homeowner in Broad Ripple or Fountain Square would be. What you’re dealing with is a fast-growing city where thousands of families close on homes every year and immediately realize the previous owner’s key is still floating around somewhere. That’s the core of our Lock Installation & Rekey work in Fishers: fast, same-day repins plus honest advice on when hardware actually needs to be replaced.
How Fishers’s Housing Stock Changes the Job
Fishers has grown from roughly 7,500 residents in 2000 to well over 100,000 today, driven by corporate relocations to the 96th Street and I-69 business corridor. That growth came almost entirely in the form of large planned subdivisions: Saxony, Sandstone Lakes, the Fall Creek corridor. The homes are newer. The frames are engineered lumber. The locks are Kwikset, Schlage, and the occasional Baldwin on higher-end builds.
What this means in practice is that our techs almost never see pre-1980 hardware in Fishers. No mortise locks. No knob-only entry sets that predate the Carter administration. Instead, we see builder-grade cylinders that are fast to rekey but weak against bumping and picking. Many homeowners leave those original SmartKey cylinders in place for a decade without knowing they lack ANSI Grade 1 protection. That’s the conversation we have every week with new homeowners: here’s what a $25 rekey achieves, and here’s what it doesn’t. We’ll tell you which is which without pushing hardware you don’t need.
There’s a local failure mode worth knowing about. Hamilton County’s freeze-thaw cycle, with January lows in the single digits followed by rapid warm spells, causes the engineered-lumber door frames in 1990s and 2000s tract construction to shift and rack. A deadbolt that latched perfectly in August can throw itself out of alignment by February. Homeowners call us thinking the rekey broke the lock. Most of the time, the cylinder is fine. The strike plate moved. We fix the alignment and the problem goes away.
Why Novak Lock & Security Is Fishers’s Lock Installation & Rekey Company
We’ve been doing this work since Daniel Novak founded the company in 2002. Sixty thousand locks, keys, and systems installed or serviced since then. Every one with a written price before we started and a documented photo record when we left. That’s not an upgrade. It’s the procedure.
Response time to Fishers is something we take seriously. Dispatch and scheduling are coordinated from the Indianapolis office, but crews serve Fishers locally. You’re not waiting on a tech to drive an hour across town. Most rekeys in Saxony or Sandstone Lakes are completed same day, often within a few hours of the first call. We carry a full truck stock of Kwikset, Schlage, Yale, and Baldwin cylinders and hardware, so the parts are on the van when we arrive, not ordered after we leave.
What we hear from Fishers customers, and what shows up in their reviews, is the same thing over and over: the price on the phone matched the invoice, the tech was uniformed and background-checked, and the work was documented. You can see the photo record from your own job. You can read the written scope before we start. This isn’t theater. It’s the only way we’ve ever operated, and it’s governed by The Haven Standard, the same quality framework applied across all ten Haven brands. Novak Lock & Security is independently owned and operated.
Our Lock Installation & Rekey Services in Fishers
Most homes in Fishers need one of four things done. Here’s what each involves, specific to the hardware we actually see in this city.
Smart Lock Installation
Fishers is full of newer subdivisions where production builders like Pulte and M/I Homes pre-wired smart-lock rough-ins as standard. That means smart lock installation is usually a 45-minute job, not a retrofit nightmare. We install Yale, Baldwin, and Schlage smart locks, integrate them with your existing deadbolt, and walk you through the app before we leave. If your home was built in the last five years, the wiring is probably already there.
Homeowners sometimes ask whether a smart lock will work with their HOA’s gate key fob. The answer is almost always no. Community gate systems in Fishers are managed by third-party access control vendors, and the fob is a separate credential. Your smart lock controls your front door. The gate fob controls the gate. We’ll show you both and make sure you’re not paying for integration that doesn’t exist.
Keyless Entry and Keypad Lock Installation
Keypad deadbolts are the most common upgrade we install in Fishers. Families moving into a home in the Fall Creek corridor want guest codes for cleaners, sitters, and in-laws, and they don’t want keys floating around. A keypad deadbolt with a physical key override gives you both. Installed cost is typically $180-$320 per door, hardware included, and the price is quoted before anyone shows up.
If you’re in an HOA with rules about exterior hardware finishes, we’ll match the existing handleset. Most Fishers HOAs require consistent finishes across visible hardware. We stock brushed nickel, oil-rubbed bronze, and satin chrome so there’s no two-week wait on a special order.
Biometric and Electronic Lock Installation
Biometric locks, meaning fingerprint readers, are less common in Fishers than keypad deadbolts, but they’re growing. The people who want them tend to have specific reasons: home offices with sensitive material, rental properties, or simply a reluctance to carry keys at all. We install biometric and electronic locks from Yale and Schlage, and we’re direct with you about battery life, cold-weather performance, and whether a particular model makes sense for your entryway.
Rekeying Existing Locks
This is the single most requested service in Fishers. You closed on a house. You don’t know how many copies of the old key exist. You want every exterior lock on one new key, and you want it done before you move your furniture in. We rekey Kwikset, Schlage, Baldwin, and Sargent cylinders, including SmartKey, for $20-$35 per cylinder. Most Fishers homes have three to five exterior cylinders, so a full rekey runs $60-$175. Done same day. Keys cut to the new code on the truck.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
What Can Be Rekeyed vs. What Genuinely Needs Replacing
This is a question we answer constantly, and it’s one of the reasons Fishers homeowners trust us. A builder-grade Kwikset SmartKey cylinder from 2012 can be rekeyed in about ten minutes. It will then work perfectly with a new key. But it will still be a builder-grade cylinder. It will still be vulnerable to bumping and picking with basic tools that cost $20 online. Rekeying changes the key, not the security.
So here’s the honest answer we give in Fishers. If the lock is in good working condition and you’re rekeying for convenience, rekey it. If the cylinder is worn, if the key sticks, if the finish is failing, or if you want actual bump resistance, replace the hardware. We’ll tell you the difference in plain terms and quote both options. No pressure. The decision is yours, and the price is in writing either way.
Trusted Brands We Service in Fishers
We’re factory-authorized on Baldwin, Medeco, Mul-T-Lock, Abloy, and Schlage. That matters less to most homeowners than it sounds like it should, but here’s what it means for you: when we install a Baldwin handleset or a Yale smart lock in a Fishers home, the warranty is real, the hardware is not gray-market, and we stock the replacement parts locally. We also carry Sargent and Kwikset for budget-appropriate work. We’re not going to sell you a Medeco high-security cylinder for a mudroom door, and we’re not going to put a builder-grade Kwikset on the main entry of a $700,000 home in Saxony unless that’s what the job requires. We match the hardware to the door and the risk.
Common Lock Installation and Rekey Problems We See in Fishers Homes
- Builder-grade SmartKey cylinders left in place for years. Fast to rekey, yes. But they can be bumped or picked with basic tools, and most homeowners in Fishers never upgrade them. We see this constantly in homes built between 2005 and 2015. The fix is usually a bump-resistant Kwikset or Schlage cylinder, installed at the same time as the rekey.
- Freeze-thaw door frame shift. The single-digit January lows followed by rapid warm spells in Hamilton County cause engineered-lumber frames to move. A deadbolt that latched in October won’t fully throw by February. The cylinder is fine. The strike plate needs to be remounted. We adjust it and the problem goes away.
- HOA gate fob confusion. Homeowners in communities like Saxony and Sandstone Lakes call us when a keypad entry or resident fob stops working. In most cases the gate system is run by a third-party access control vendor, not the HOA directly and not the homeowner. We’ll diagnose it and tell you honestly if it’s ours to fix or if you need to call the management company. We won’t bill you for a service call that isn’t ours to handle.
- Mismatched hardware after a handyman rekey. We fix a lot of jobs where a previous rekey left three locks on two different keys, or a deadbolt that doesn’t match the knob below it. In Fishers, where most homes were built in the last 25 years, the hardware is usually compatible. It just got installed wrong. We straighten it out and key everything to a single new key.
Pricing for Lock Installation and Rekey in Fishers, IN
| Service | Typical Fishers Price | What It Includes |
|---|---|---|
| Standard rekey (per cylinder) | $20-$35 | Repin to new key, new keys cut on site |
| Full home rekey (3-5 cylinders) | $60-$175 | Every exterior cylinder, one new key |
| Deadbolt replacement | $90-$160 per lock | Hardware and installation |
| Keypad deadbolt installation | $180-$320 per door | Hardware, install, app setup |
| Smart lock installation | $200-$450 per door | Hardware, install, app walkthrough |
Those are honest ranges for the Fishers market. Your final quote depends on cylinder count, hardware grade, and whether there’s an alignment issue to correct, but the price is set before we dispatch. There’s no call-out surcharge added on arrival. No bait-and-switch. If you bring us a written estimate from another company, we’ll review it free, and we’ll tell you truthfully whether their price is fair or you’re paying for hardware you don’t need.
Serving Fishers and Nearby Cities
Most of our work happens along the 96th Street corridor and throughout the Fall Creek and Sandstone Lake subdivisions. We also serve homes in Noblesville, Carmel, Westfield, and parts of Indianapolis. If you’re just outside Fishers, call and ask. The dispatcher will give you a firm quote, not a callback window. Learn more about our Fishers coverage.
Serving Fishers, IN - Our Local Coverage Area
We’re based in the Fishers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs: Lock Installation and Rekey in Fishers
Yes, we can rekey builder-grade Kwikset SmartKey locks the same day, usually within a few hours of your call. SmartKey cylinders are designed for fast repinning, so we can have every exterior lock on a new key in under an hour. Whether you should also upgrade the hardware is a separate question. We’ll inspect the cylinders and tell you straight: if they’re in good working order, a $20-$35 per-cylinder rekey is all you need. If they’re worn or you want bump resistance, we’ll quote a hardware upgrade at $90-$160 per lock. Either way, the price is in writing before we start. Call (331) 310-8471 for a firm quote.
Almost always a door frame issue. Hamilton County’s freeze-thaw cycle shifts engineered-lumber frames on 1990s and 2000s tract homes, which throws the deadbolt out of alignment with the strike plate. The cylinder itself is usually fine. Last winter in Saxony, we rekeyed a new-construction Pulte home where the frame had racked so badly the strike plate had to be remounted before we could repin the cylinder. We did non-destructive entry, adjusted the strike, and rekeyed all five locks to a bump-resistant Kwikset pin and tumbler system, no drilling and no replacing the handlesets. If your deadbolt is sticking in winter, call us before you assume the lock is broken. Most of the time, it’s a $75-$120 strike adjustment, not a $300 lock replacement.
Yes, we can install a smart lock on a home with a Kwikset or Schlage handleset, and in most newer Fishers subdivisions the rough-in is already there. Installed cost runs $200-$450 per door, hardware included. What won’t work is integration with your HOA’s community gate fob. Those gate systems are managed by third-party access control vendors, and the fob operates on a separate credential system. Your smart lock controls your front door. The gate fob controls the gate. We’ll set up your smart lock, create your codes, and show you how everything works. If your gate fob itself is failing, that’s the HOA’s vendor, not us, and we’ll tell you that honestly before we bill a service call.
No, we don’t need the old key. We can rekey any single-cylinder deadbolt or entry knob without the existing key by using standard locksmith techniques to remove the cylinder and repin it to a new key. Non-destructive entry is always the first approach, and it works on the vast majority of Fishers homes. If the cylinder is damaged or frozen, we may need to drill, and we’ll tell you that before we do it, with the cost quoted in writing. You’ll walk away with new keys, a documented photo record, and a lock that no previous key will open.
Same day, in most cases. Homes in the Fall Creek corridor are a regular part of our Fishers route, so response time is typically two to four hours from your call. We carry Kwikset, Schlage, Yale, Baldwin, and Sargent cylinders and deadbolts on the truck, along with smart lock hardware. A full rekey plus new deadbolts on three exterior doors usually runs $250-$500 total, depending on cylinder count and hardware grade, and the exact price is quoted on the phone before anyone is dispatched. Call (331) 310-8471. The person who answers is a live dispatcher, and they’ll give you a firm number, not a ballpark.
Call Novak Lock & Security for Lock Installation and Rekey in Fishers
If you just closed on a home in Fishers, or you’ve been meaning to get your locks rekeyed for years, call (331) 310-8471. We’ll answer, we’ll quote you a written price, and we’ll schedule a time that works. Background-checked, uniformed technician. Photo record when the job is done. And if it’s not done right, the 365-Day Done Right Promise means we make it right. That’s the whole deal, in writing, every time.
Written by Daniel Novak, Owner at Novak Lock & Security, serving Fishers since 2002.
Lock Installation & Rekey in Nearby Areas